This study aims to investigate the limitations and applicability of different ion exchanged zeolites as antimicrobial additive in thermoplastic polyether type polyurethanes. These composites were designed to improve the health quality of hospitalized patients by expressing both biocompatibility and relevant antimicrobial activity. The zeolites were exchanged with silver, copper and zinc ions and single, binary and ternary ion-exchanged zeolite-polyurethane composites were prepared. The antimicrobial activity and the resistance of the composites against the human environment play vital role in the applicability of the materials as a medical device therefore these properties were investigated. The antimicrobial test were performed on Methicillin-resistant Staphylococcus aureus, Pseudomonas aeruginosa and Candida tropicalis. The tests showed that the efficiency of the silver ions is superior to the other single ionic systems. Besides, the binary and ternary ion-exchanged samples had similar antimicrobial efficiency regardless the type of the ions in the zeolite. The biocompatibility tests were carried out in-vitro in artificial body fluids for a period of 12 weeks. As a result of the invitro test, degradation of the composites were observed and the structural changes of the materials were detected and described by Scanning Electron Microscopy, Contact Angle measurements and Attenuated Total Reflection Fourier Transform Infrared Spectroscopy

No abstract

Polymers used for biomedical purposes in medical devices are usually requested to be inert to degradation. This article describes that slow irreversible changes were observed in silicone surfaces exposed to in vivo biofilms even if silicone, in general, is supposed to have excellent long-term properties. Tracheostomy tubes made of silicone rubber were exposed to in vivo biofilm environments in clinical tests for periods of 1, 3, and 6 months. The chemical degradation was monitored by MALDI-TOF MS, ATR-FTIR, and FE-SEM. In addition, the physical changes were monitored by contact angle and hardness measurements. Cyclic polydimethylsiloxane (PDMS) was detected on the surfaces of new (unaged) silicones. On the surfaces of the in vivo samples new compounds, presumably linear methyl-hydroxyl-terminated PDMS, were detected in addition to cyclic PDMS. These compounds may be formed as a result of the hydrolysis of linear dimethyl terminated PDMS, which is also present in the silicone rubber. ATR-FTIR spectroscopy confirmed that hydrolysis had indeed occurred during the in vivo exposure, since SiAOH groups were detected. Furthermore, significant changes in the topography were detected by FE-SEM, indicating the initiation of degradation. No significant changes in the contact angle of the in vivo used samples were observed, but this information may be shielded by the fact that biofilm may remain on the surface, despite the thorough cleaning before the analysis. It is also possible that the surface hydrophobicity was recovered by the diffusion of linear low-molecular-weight compounds from the bulk.

Abstract. The aim of this study was to evaluate new Zr-based bulk metallic composites with 11 crystallized dendrites or droplets which have the volume fraction below the critical one (the

The preparation and modelling of single, binary and ternary ion exchanged zeolites that express antimicrobial efficiency is discussed. As experimental material A type zeolite was used and different variations of Ag, Cu and Zn ions were incorporated into the crystal structure. Antimicrobial efficiency is based on the ion concentration and ion release of the zeolite, therefore the maximum cation-exchange capacities (CEC) were determined for each of the single ions. After the determination of CEC the preparation of binary and ternary ion-exchanged zeolite samples were prepared by the mixture of silver, copper and zinc nitrate solutions and the composition of the samples was determined by atomic absorption spectroscopy (AAS). To verify the bioactive effect, the minimum inhibitory concentration (MIC) of single, binary and ternary ion-exchanged zeolite A was determined for bacteria strains.

A remarkable number of scientific papers are available in the literature about the bulk amorphous alloys and metallic glasses. Today, DSC is an essential tool for amorphous alloys research and development, and of course for quality assurance. In many cases, users seek to examine the determination of only one or two properties, although much more information can be obtained from the measurements. The research involved structural relaxation, Curie temperature, glass temperature, crystallization, phase separation, nanocrystalline volume fraction, melting point and liquidus temperature determination subjects and kinetics of microstructural transformations induced by thermal treatment. We collected and present the information that can be obtained with this technique and draws the reader’s attention to some potential problems related to data interpretation.

No abstract

Different properties (tensile strength, elongation, modulus, impact strength) of rice husk (RH) reinforced polypropylene (PP) coupled by Maleic-Anhydride grafted Polypropylene (MAgPP) have been investigated. MAgPP is an effective coupling agent, not only in cellulosic-fibre filled polyolefine composites, but in rice husk flour filled polypropylene composite systems as well. It gives a utilizable construction polymer matrix composite (PMC) material even at a 40 wt.% RH filling degree. The strength and modulus increases by adding the rice husk but the elongation decreases in a non-monotonic way. Micrographs shows weak coupling in between RH and PP without MAgPP.