Projeto acadêmico sem fins lucrativos desenvolvido no âmbito da iniciativa Acesso Aberto Caracterização da cor da madeira de clones...
RESUMO O Pinus elliottii Engelm. possui uma vasta possibilidade de aplicações, porém, apresenta características indesejáveis às quais podem ser atenuadas com a adoção dos tratamentos de termorretificação e a furfurilação. Assim, este trabalho analisou a influência que os tratamentos de furfurilição e termorretificação exerceram em propriedades tecnológicas da madeira de Pinus elliottii. Para tanto, confeccionaram-se corpos de prova com dimensões de 15 x 15 x 250 mm (tangencial, radial e longitudinal), distribuídos igualmente em 5 tratamentos: controle, furfurilação com carga de 25% de álcool furfurílico (T F25%) e termorretificação em diferentes temperaturas (T 180°C, T 200°C e T 220°C). Avaliaram-se a variação da massa (ΔM) segundo adaptação da norma ASTM D 2017 (2005), à massa específica aparente ao teor de umidade de 12% (ρ12%), os módulos de elasticidade (MOE) e ruptura (MOR) obtidos pelo ensaio de flexão estática conforme a norma ASTM D 143 (2014), e a variação colorimétrica da madeira em conformidade com as recomendações do sistema CIE-L*a*b*. Verificou-se que o tratamento com furfurol provocou: aumentos significativos na massa, ρ12%, MOR, e causou o escurecimento da madeira, não afetando significativamente o MOE, em 5% de probabilidade de erro. Os tratamentos de termorretificação afetaram significativamente a perda de massa, contudo a maior diferença foi observada no tratamento T 220°C, o qual acarretou redução significativa no MOR em relação ao grupo controle, destacando-se que tal tratamento deixou a madeira com coloração semelhante aquela adquirida pela madeira tratada com furfurol. Conclui-se que ambos os tratamentos causaram o escurecimento da madeira de Pinus elliottii agregando assim valor estético, sendo que o tratamento à base de furfurol, com carga de 25%, ocasionou melhora nas propriedades tecnológicas da madeira. Apesar dos tratamentos de termorretificação terem aumentado o MOE, geraram perda de massa significativa, principalmente nos tratamentos mais agressivos, comprometendo assim possíveis usos da madeira com finalidade estrutural.
Tendo em vista um aumento no apelo ambiental, a evolução na produção de papéis reciclados de aparas é motivada pela necessidade de reduzir custos e minimizar o impacto causado por estes produtos, bem como, a necessidade de modificações que visem mudanças nas propriedades físico-mecânicas, como por exemplo, a inserção de materiais nano na produção do papel. Sendo assim, o presente estudo teve como objetivo, avaliar as propriedades tecnológicas de papéis reciclados, produzidos com a adição de diferentes concentrações de nanofibrilas de celulose (NFC), de Eucalyptus spp. Produziu-se papéis com 60 g/cm² de gramatura, adicionando-se diferentes concentrações de nanofibrilas de celulose nos papéis, a fim de avaliar o efeito destas na união das fibras e nas propriedades tecnológicas dos papéis reciclados, para isso foi feita a caracterização por MEV dos papéis sem adição e com 16% de concentração de NFC. Foram efetuados testes de índice de tração, elongamento, índice de estouro, espessura, passagem do ar (Gurley) e gramatura. Com a análise dos resultados, foi possível concluir que a maior parte das propriedades tecnológicas apresentou melhora com o aumento na concentração de nanofibrilas. Para resistência a tração em que houve um acréscimo de 266%, para elongamento com um ganho de 308% e resistência ao estouro um incremento de 407%. Assim a inserção de nanocelulose demonstra ser um bom aditivo para a produção de papéis, aumentando as propriedades físicas e mecânicas dos papéis.
O trabalho constitui um dos elementos mais importantes de produção social, ao passo que ao longo dos anos deixou de ser encarado apenas sob o aspecto econômico (homo economicus, relacionado à necessidade de subsistência), mas também tornou-se vetor de possibilidade de se alcançar reconhecimento e prestígio social, isto é, abrangendo os aspectos sociais e psicológicos. O objetivo deste estudo foi analisar a qualidade de vida no trabalho (QVT) em uma construtora civil da cidade de Pelotas/RS, enfatizando os aspectos relacionados a bem-estar, programas de QVT, identificação de benefícios sociais oferecidos pela organização e apontamento dos dificultadores à promoção de QVT. Metodologicamente, trata-se de uma pesquisa de caráter descritivo e abordagem qualitativa, cujo método foi um estudo de caso. Quanto ao instrumento de coleta de dados, utilizou-se o roteiro de entrevista semiestruturada que foi aplicado no mês de março de 2017 ao gestor de recursos humanos. Os resultados apontam que na percepção do entrevistado, a empresa está dedicando atenção à temática QVT, ao passo que promove ações junto aos seus empregados, ainda que de maneira incipiente. Conclui-se que a organização demonstrou percepção limitada e fragmentada sobre QVT. Observou-se que a organização adota um projeto voltado a esta temática e que se encontra em fase inicial. Como fatores limitantes em investimentos na área encontram-se o aspecto financeiro e a falta de apoio do gestor, a falta de tempo, demanda elevada de tarefas, metas altas e sobrecarga de trabalho, com consequente escassez de tempo e falta de interesse por parte dos próprios colaboradores.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.