Developing a high-performance donor polymer is critical for achieving efficient non-fullerene organic solar cells (OSCs). Currently, most high-efficiency OSCs are based on a donor polymer named PM6, unfortunately, whose performance is highly sensitive to its molecular weight and thus has significant batch-to-batch variations. Here we report a donor polymer (named PM1) based on a random ternary polymerization strategy that enables highly efficient non-fullerene OSCs with efficiencies reaching 17.6%. Importantly, the PM1 polymer exhibits excellent batch-to-batch reproducibility. By including 20% of a weak electron-withdrawing thiophene-thiazolothiazole (TTz) into the PM6 polymer backbone, the resulting polymer (PM1) can maintain the positive effects (such as downshifted energy level and reduced miscibility) while minimize the negative ones (including reduced temperature-dependent aggregation property). With higher performance and greater synthesis reproducibility, the PM1 polymer has the promise to become the work-horse material for the non-fullerene OSC community.
Regulating molecular structure to optimize the active layer morphology is of considerable significance for improving the power conversion efficiencies (PCEs) in organic solar cells (OSCs). Herein, we demonstrated a simple ternary copolymerization approach to develop a terpolymer donor PM6‐Tz20 by incorporating the 5,5′‐dithienyl‐2,2′‐bithiazole (DTBTz, 20 mol%) unit into the backbone of PM6 (PM6‐Tz00). This method can effectively tailor the molecular orientation and aggregation of the polymer, and then optimize the active layer morphology and the corresponding physical processes of devices, ultimately boosting FF and then PCE. Hence, the PM6‐Tz20: Y6‐based OSCs achieved a PCE of up to 17.1% with a significantly enhanced FF of 0.77. Using Ag (220 nm) instead of Al (100 nm) as cathode, the champion PCE was further improved to 17.6%. This work provides a simple and effective molecular design strategy to optimize the active layer morphology of OSCs for improving photovoltaic performance.
Regulating molecular structure to optimize the active layer morphology is of considerable significance for improving the power conversion efficiencies (PCEs) in organic solar cells (OSCs). Herein, we demonstrated a simple ternary copolymerization approach to develop a terpolymer donor PM6‐Tz20 by incorporating the 5,5′‐dithienyl‐2,2′‐bithiazole (DTBTz, 20 mol%) unit into the backbone of PM6 (PM6‐Tz00). This method can effectively tailor the molecular orientation and aggregation of the polymer, and then optimize the active layer morphology and the corresponding physical processes of devices, ultimately boosting FF and then PCE. Hence, the PM6‐Tz20: Y6‐based OSCs achieved a PCE of up to 17.1% with a significantly enhanced FF of 0.77. Using Ag (220 nm) instead of Al (100 nm) as cathode, the champion PCE was further improved to 17.6%. This work provides a simple and effective molecular design strategy to optimize the active layer morphology of OSCs for improving photovoltaic performance.
Summary of main observation and conclusion
Small molecular acceptors (SMAs) BTC‐2F and BTH‐2F, based on heptacyclic benzodi(cyclopentadithiophene) electron‐donating core (CBT) with chlorinated‐thienyl conjugated and thienyl conjugated side chains, respectively, are designed and synthesized. Compared with non‐chlorine acceptor BTH‐2F, BTC‐2F exhibits slightly blue‐shifted absorption spectra, similar the lowest unoccupied molecular orbital (LUMO) (–3.91 eV), deeper highest occupied molecular orbital (HOMO) energy level and higher electron mobility than that of BTH‐2F. PM6, a wide bandgap polymer, is selected as the donor material to construct bulk heterojunction polymer solar cells processed with nonhalogenated solvent toluene. The optimized PM6:BTC‐2F‐based device presents a 12.9% power conversion efficiency (PCE), while the PCE of PM6:BTH‐2F‐based device is only 11.3%. The results suggest that it is an effective strategy to optimize the photoelectric properties of SMAs by incorporating chlorine atom into the conjugated side chains.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.