RESUMO O objetivo da pesquisa foi avaliar a resistência natural da madeira de teca (Tectona grandis) a fungos e térmitas xilófagos em condições de laboratório. As árvores empregadas possuíam 15 anos de idade, provenientes de um plantio da Empresa
The objective of this work was to evaluate the influence of different useful areas provided by the planting spacings (3 × 1, 3 × 2, 3 × 3, 3 × 4 m) on the production and permeability of heartwood and sapwood of Eucalyptus grandis and Eucalyptus grandis × Eucalyptus urophylla clones at 4 years old. Regardless of the clone, there was no effect of planting spacing on the heartwood/sapwood relation and wood permeability. All clones showed a heartwood decrease with increased height, regardless of planting spacing, and E. grandis (B) was the only one that had its heartwood percentage positively and significantly correlated with the dendrometric variables (DBH and commercial height). The use of the dymethil yellow compound was indispensable in defining the heartwood and sapwood regions in the samples from 50% of the stem height. The heartwood permeability was low in all evaluated clones, suggesting vessel obstruction by tyloses or other deposits, while sapwood permeability reached 405.4 cm3/cm.atm.s.
Thermal profile of wood species from the brazilian semi-arid region submitted to pyrolysis. CERNE, v. 25, n. 1, p. 44-53, 2019. HIGHLIGHTS We analyzed native and endangered species of the Brazilian semi-arid region. The thermal profile of the species was questioned for energy generation. Mimosa tenuiflora and Poincianella pyramidalis were the most suitable wood species for sustainable charcoal production. The energy characteristics will allow the efficient management of the species in mixed plantations for this purpose.
RESUMOO objetivo deste trabalho foi analisar o desempenho operacional do desdobro de Eucalyptus grandis W.Hill ex Maiden com motosserra, no contexto da utilização em pequena escala, utilizando-se como ferramentas de avaliação operacional do desdobro com motosserra foi satisfatório, com rendimento e eficiência operacional médios de 58,5% e diamétricas: 20,0-25,9 cm, 26,0-28,9 cm, 29,0-31,9 cm, 32,0-34,9 cm e 35,0-41,0 cm. O desempenho operacional do desdobro com motosserra foi satisfatório, com rendimento e eficiência médios de 58,5% e 0,55 m³/operário/h, respectivamente. No entanto, a viabilidade dessa técnica está restrita a sua utilização em pequena escala e ao padrão de qualidade exigido, da maneira como tem sido utilizada atualmente por pequenos produtores rurais. A classe diamétrica 3 (29,0-31,9 cm) apresentou o melhor rendimento, de 66,6%, pois foi aquela em que houve a melhor adequação do modelo de corte, ou seja, melhor relação entre diâmetro das toras e produtos gerados. Sugere-se para pesquisas futuras o desenvolvimento de modelos de corte específicos para cada classe diamétrica, além da redução da amplitude das classes, visando-se aumentar o rendimento em madeira serrada. De modo geral, o aumento do diâmetro das toras resulta em aumento da eficiência operacional. O tempo médio gasto por operação foi o mesmo para as classes 3, 4 e 5, demonstrando que a última apresentou a melhor eficiência operacional (0,82 m³/operador/h.). Palavras-chave: desdobro com motosserra; Eucalyptus grandis; rendimento; eficiência operacional. ABSTRACTThe aim of this work was to analyze the operational performance of Eucalyptus grandis W.Hill ex Maiden logs breakdown with chainsaw, taking into account small scale use, e.g., in small farms, using yield and operational efficiency as evaluation tools. The specific aim was to analyze the behavior of yield and operational efficiency in five diametric classes: 20.0-25.9cm, 26.0-28.9 cm, 29.0-31.9 cm, 32.0-34.9 cm and 35.0-41.0 cm. According to the results obtained, the chainsaw log breakdown had a satisfactory operational behavior, with average yield and operational efficiency of 58,5% and 0.55 m³/operator/h, respectively. However, the feasibility of such technique is restricted to small scale use. Diametric class 3 (29.0-31.9 cm) presented the best yield (66.6%) because it was the one that presented the best adequacy between log diameter and products. It is suggested for further researches the development of specific sawing patterns by diametric class, in addition to the reduction of class ranges, aiming the yield increase. The average breakdown time spent by log was the same for classes 3, 4 and 5, resulting that the latter presented the best operational efficiency (0.82 m³/operator/h).
ResumoEficiência da impregnação com soluções salinas na resistência das madeiras de Corymbia torelliana e Eucalyptus cloeziana ao fungo deteriorador de madeira Postia placenta. A pesquisa teve como objetivo avaliar a eficiência de soluções salinas (cloreto de sódio, cloreto de lítio, carbonato de sódio, sulfato de magnésio, sulfato de zinco e sulfato de cobre II) impregnadas nas madeiras de Corymbia torelliana e Eucalyptus cloeziana na resistência biológica ao fungo de podridão parda (Postia placenta) em condições de laboratório. De cada espécie foram retiradas amostras de 2,0 x 2,0 x 3,0 cm (tangencial x radial x longitudinal), ao longo dos pranchões obtidos na região do cerne no sentido base-topo. As amostras foram impregnadas com soluções a 5% de concentração e submetidas durante 16 semanas à ação do fungo Postia placenta em condições de laboratório. A madeira de Eucalyptus cloeziana foi mais resistente à deterioração que a de Corymbia torelliana, tanto impregnada com soluções salinas quanto não impregnada (natural). Os tratamentos com soluções salinas foram satisfatórios quanto à resistência da madeira à degradação, servindo como um parâmetro para a avaliação da madeira ao fungo xilófago testado. Palavras chaves: Tratamento da madeira, fungo de podridão parda, biodeterioração.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.