The purpose of this study was to determine the improvement of entrepreneurial competence of students before and after the use of Teaching Factory learning model. The object of this research is the students of SMK Negeri 2 Boyolangu Culinary Skill Program, X JB 3 students with 34 students as control class and X JB 6 with 35 students as experiment class. This research was conducted by using quasi experiment method with non equivalent control group design design. The instruments used are pre test, post test, questionnaire, and observation sheet used to measure the achievement of entrepreneur competence. Student entrepreneur competence has improved after getting Teaching Factory teaching treatment.
Kontur tanah Kota Balikpapan adalah berbukit-bukit menyebabkan tidak semua warga mendapatkan pasokan air bersih dari PDAM sehingga banyak warga yang mengandalkan air tanah atau sumur bor untuk digunakan kegiatan sehari-hari. Air tanah di Kota Balikpapan sebagian besar masih dibawah standar air bersih terutama di masyarakat sekitar lingkungan Kelurahan Graha Indah yakni air tanahnya berbau logam dan berwarna kuning. Hal ini terjadi dikarenakan air tanah yang dikelola oleh masyrakat tidak diolah terlebih dahulu ataupun diolah terlebih dahulu karena keterbatasan pengetahuan maka air tanah yang dihasilkan tetap berwarna kuning. Meskipun air tanah yang digunakan untuk kegiatan sehari-hari masih dibawah standar air bersih masyarakat dan santri masih tetap memanfaatkan air tanah tersebut untuk mandi, mencuci piring, mencuci pakaian dan kegiatan yang lain. Dengan keadaan tersebut maka metode yang digunakan menyelesaikan masalah tersebut menggunakan Teknologi Pengolahan Air bersih yang terdiri dari proses netralisasi, aerasi, koagulasi, flokulasi, sedimentasi dan filtrasi. Tujuan dari Pengabdian kepada Masyarakat ini adalah: 1. Memberikan pelatihan dan keterampilan kepada para masyarakat, untuk mengetahui cara mengolah air yang berbau besi dan berwarna kuning menjadi air bersih. 2. Mengaplikasikan pemahaman yang sudah diberikan pada saat pelatihan menjadi suatu teknologi tepat guna beserta memberi pengetahuan tentang cara pemeliharaan teknologi tepat guna tersebut.
AbstrakKewirausahaan (entrepreneurship) ialah kemampuan kreatif dan inovatif yang dijadikan dasar, kiat, dan sumber daya untuk mencari peluang menuju sukses. Kesejahteraan atau nilai tambah dari masyarakat sebagai tujuan dari kewirausahaan itu, dilakukan melalui pengungkapan gagasan baru, penggalian sumber daya, dan merealisasikan gagasan itu menjadi suatu kenyataan yang menguntungkan. Pelatihan ini dilaksanakan dengan memberdayakan masyarakat khususnya santri dan santriwati Pondok Pesantren Al Mujahidin Balikpapan yang beralamat di Jl. Soekarno Hatta Km. 10 Balikpapan Utara. Pelatihan dilaksanakan pada hari Kamis 13 Desember 2018 pukul 08.00 sampai selesai. Metode pelatihan yang digunakan melalui seminar young entrepreneurship, praktik langsung membuat inovasi produk kuliner (roti dan kue), dan praktik pengemasan dan pemasaran. Peserta dibagi menjadi tiga kelompok. Setiap kelompok membuat produk roti dan kue yang berbeda. Kelompok pertama praktik membuat roti manis, kelompok kedua praktik membuat muffin, kelompok ketiga membuat swiss roll.Kata Kunci: roti, kue, kuliner, pelatihan, wirausaha https://journal.uwgm.ac.id/index.php/abdimasmahakam/index
Suatu Sistem Tenaga Listrik selalu dilengkapi dengan pentanahan titik netral dari Generator sebagai mesin listrik yang membangkitkan daya, demikian pula pentanahan titik netral trafo sebagai mesin listrik dan jaringan distribusi yang menyalurkannya. Fungsi pengetanahan disini adalah sebagai pelindung terhadap adanya gangguan listrik dari luar sehingga mengakibatkan terjadinya tegangan lebih pada fasa yang sehat. Kelebihan tegangan ini akan dinetralisasi melalui konduktor ( penghantar ) pentahanan. Juga dengan terjadinya ketidakseimbangan beban yang mengakibatkan fasa netral yang bertegangan dapat dinetralisasi dengan pentahanan tersebut. Selain itu, pentanahan dapaat berfungsi sebagai pelindung body mesin yang dihubungkan dengan hantaran pentahanan bila timbul gangguan tegangan lebih maupun gangguan hubung singkat. Beberapa tujuan penting dari pentanahan adalah memproteksi gangguan fasa ke tanah baik berupa transien maupun gangguan yang berlangsung terus menerus, mencegah timbulnya arus gangguan yang besar, dan mengurangi arus gangguan sampai harga minimumnya.Sistem pentanahan harus memenuhi standard dan syarat agar dapat bekerja efektif. Pentanahan harus menggunakan bahan tahan korosi terhadap berbagai kondisi kimiawi yang memiliki nilai tahanan rendah agar dapar menyalurkan arus gangguan yang besar dan berulang-ulang. Prinsipnya, adalah Hukum Ohm yaitu E = I x R. Kerangka Mesin Listrik yang terhubung ke tanah melalui sistem pentanahan dengan tahanan diatas standard akan memiliki tegangan bila terjadi gangguan fasa ke tanah. Suatu Sistem Tenaga Listrik selalu dilengkapi dengan pentanahan titik netral dari Generator sebagai mesin listrik yang membangkitkan daya, demikian pula pentanahan titik netral trafo sebagai mesin listrik dan jaringan distribusi yang menyalurkannya. Fungsi pengetanahan disini adalah sebagai pelindung terhadap adanya gangguan listrik dari luar sehingga mengakibatkan terjadinya tegangan lebih pada fasa yang sehat. Kelebihan tegangan ini akan dinetralisasi melalui konduktor ( penghantar ) pentahanan. Juga dengan terjadinya ketidakseimbangan beban yang mengakibatkan fasa netral yang bertegangan dapat dinetralisasi dengan pentahanan tersebut. Selain itu, pentanahan dapaat berfungsi sebagai pelindung body mesin yang dihubungkan dengan hantaran pentahanan bila timbul gangguan tegangan lebih maupun gangguan hubung singkat. Beberapa tujuan penting dari pentanahan adalah memproteksi gangguan fasa ke tanah baik berupa transien maupun gangguan yang berlangsung terus menerus, mencegah timbulnya arus gangguan yang besar, dan mengurangi arus gangguan sampai harga minimumnya.Sistem pentanahan harus memenuhi standard dan syarat agar dapat bekerja efektif. Pentanahan harus menggunakan bahan tahan korosi terhadap berbagai kondisi kimiawi yang memiliki nilai tahanan rendah agar dapar menyalurkan arus gangguan yang besar dan berulang-ulang. Prinsipnya, adalah Hukum Ohm yaitu E = I x R. Kerangka Mesin Listrik yang terhubung ke tanah melalui sistem pentanahan dengan tahanan diatas standard akan memiliki tegangan bila terjadi gangguan fasa ke tanah.
The relevance of the curriculum between vocational education (diploma) and industry needs is still a matter in the world of education in Indonesia. This happens the link and equivalent in the preparation of the education curriculum have not existed. The Indonesian government through the policy of an independent learning and independent campus learns to create appropriate curriculum designs between vocational education and industry. This research is to find out the industrial curriculum design for diploma graduates. The methodology used a study by finding theoretical references that are relevant to the topic and sought through descriptive analysis. the right and appropriate partnership, it can produce curricula based on the industry required by student competencies in four categories, namely (1) Core foundations, (2) Concentrations (3) Experiences (Industry Experience and Internship), (4) Final Projects. These four categories provide an increase in student competencies that are in line with industry needs.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.