The door operator in metallurgical equipment is a spatial 6-bar linkage mechanism. The numerical model of motion and force of the mechanism was developed and the numerical solution was applied. A computer simulation was implemented. There is a high level of consistency between the solution and simulation. The torques required on driving crank have been studied. The influences of the self-lock conditions on the crank length and con-rod length have been explored. The effects of the length of crank and con-rode on the needed maximal torques of the crank have been studied, too. And the kinematics analysis attributes the lightening design of the slider structure on the basis of considering the sliders rigidness and intensity.
Coke combustion process, the constant proportion of the combustion air-fuel ratio control results in low combustion efficiency and fault-prone, difficult to adapt to changes in complex working conditions. Application of intelligent technology of case-based reasoning, fuzzy control, proposed for intelligent energy saving air-fuel ratio control method. Based on current trends in working conditions and combustion process in case of failure, predict the typical faults with case-based reasoning technology to the combustion process. On this basis, through case-based reasoning algorithm realize the real-time air-fuel ratio correction. Based on fuzzy-PID temperature cascade control we can obtain the appropriate flue gas flow and flue suction and realize the stability of the combustion process to achieve optimal control.
The ladle is an important equipment of the metallurgical industry. Distribution of thermomechanical stress in linings has an essential influence on its life, and the size of its life-span influences the economic benefits of the iron and steel enterprise directly. Two-dimensional model of ladle based on law of finite element method is built, and the influence of thermal conductivity, thermal expansion coefficient, elasticity coefficient and thickness of work lining on ladle stress field are discussed. The calculation results indicate that stress increases with the increase of thermal conductivity, thermal expansion coefficient and elasticity coefficient and decrease of thickness.
The two-dimensional O-ring seal nonlinear axisymmetric finite element model are established which is used for swinging hydraulic cylinder. Some factors influencing rubber O-ring sealing performance were taken into account, such as rotating shaft diameter, O-ring seal section diameter. The results indicate that when medium pressure is zero, the two factors influence Von Mises and maximum contact stress of sealing face greatly. Under medium pressure (P=10Mpa), the two factors have a little influence to Von Mises and maximum contact stress.
Green manufacturing is an effective way of realizing the sustainable development strategy. From the view of evolution of production chain and goods value, energy-saving, cleaner production and green manufacturing of iron and steel industry is discussed and the importance of system optimization of steel manufacturing process is stressed. Connotation of green manufacturing for the iron and steel was explained, the function of steel production process for green manufacturing was discussed and the content system of implementation of green manufacturing for the iron and steel enterprise was established. Finally the steel production process was optimized. The function of iron and steel manufacturing procedure are broaden-manufacturing function of steel product, function of energy conversion and function of waste recycling, which will enhance enterprise’s competitiveness and sustainability.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.