Smart textiles promise to have a significant impact on future wearable devices. Among the different approaches to combine electronic functionality and fabrics, the fabrication of active fibers results in the most unobtrusive integration and optimal compatibility between electronics and textile manufacturing equipment. The fabrication of electronic devices, in particular transistors on heavily curved, temperature sensitive, and rough textiles fibers is not easily achievable using standard clean room technologies. Hence, we evaluated different fabrication techniques and multiple fibers made from polymers, cotton, metal and glass exhibiting diameters down to 125 µm. The benchmarked techniques include the direct fabrication of thin-film structures using a low temperature shadow mask process, and the transfer of thin-film transistors (TFTs) fabricated on a thin (≈1 µm) flexible polymer membrane. Both approaches enable the fabrication of working devices, in particular the transfer method results in fully functional transistor fibers, with an on-off current ratio >10 7 , a threshold voltage of ≈0.8 V, and a field effect mobility exceeding 7 cm 2 V −1 s −1 . Finally, the most promising fabrication approach is used to integrate a commercial nylon fiber functionalized with InGaZnO TFTs into a woven textile.

Optogenetics provide a potential alternative approach to the treatment of chronic pain, in which complex pathology often hampers efficacy of standard pharmacological approaches. Technological advancements in the development of thin, wireless, and mechanically flexible optoelectronic implants offer new routes to control the activity of subsets of neurons and nerve fibers in vivo. This study reports a novel and advanced design of battery-free, flexible, and lightweight devices equipped with one or two miniaturized LEDs, which can be individually controlled in real time. Two proof-of-concept experiments in mice demonstrate the feasibility of these devices. First, we show that blue-light devices implanted on top of the lumbar spinal cord can excite channelrhodopsin expressing nociceptors to induce place aversion. Second, we show that nocifensive withdrawal responses can be suppressed by green-light optogenetic (Archaerhodopsin-mediated) inhibition of action potential propagation along the sciatic nerve. One salient feature of these devices is that they can be operated via modern tablets and smartphones without bulky and complex lab instrumentation. In addition to the optical stimulation, the design enables the simultaneously wireless recording of the temperature in proximity of the stimulation area. As such, these devices are primed for translation to human patients with implications in the treatment of neurological and psychiatric conditions far beyond chronic pain syndromes.

Medical devices measure vital parameters such as pulse, respiration rate, and blood oxygenation, over periods of days or weeks in a continuous manner. Traditional systems only support such requirements in stationary applications where a constant power supply is available. Trends toward remote healthcare and telemedicine require wearable devices, able to provide similar functionalities in wireless mode. Miniaturized and thin form factors, desirable in wearable applications, set stringent constraints on the available power, and consequently on the accuracy and lifetime. Energy harvesting combined with low-power design and energy efficient processing can significantly extend the lifetime of wearable devices. This paper presents a wearable pulse oximeter assembled in a 3D ring-like geometry that achieves self-sustainability by exploiting efficient power management, solar energy harvesting, and ultra-low power processing in a multi-core microcontroller. The design strategy of combining onboard processing to monitor blood oxygenation and the transmission of only relevant information via a Bluetooth low-energy (BLE) interface, significantly reduces the overall energy consumption. Experimental results on the designed and developed prototype demonstrate that measuring the blood oxygenation once every minute with a sampling rate of 100 samples/s achieve accurate results at the daily energy consumption of 28 J including hourly BLE transmissions. The low-power design allows the system to be self-sustainable with just 64 min of sunlight per day or 12 hrs. of indoor home light. INDEX TERMS Wearable devices, energy harvesting, smart sensing, low power design, energy efficiency, self-sustaining.

No abstract

The functions and characteristics of electronic devices are modified on‐demand by wirelessly triggered etching via the use of wireless microfluidic devices. J. A. Rogers and co‐workers show, on page 5100, that functional transformations of target constituent components are achieved by dissolving the strategy point of circuit with etching solution injected through microfluidic channels on demand.

Interest in PVDF-TrFE copolymers as ferroelectric material for Memory application is driven by the prospect of having low cost, low operating voltage and fully organic device. Some previous studies reported FET designs using copolymers [refs 1,2] but none of these structures were fully integrated on silicon wafers and using a MOSFET fabrication process. We present for the first time the integration of a PVDF-TrFE (70%-30%) layer into a standard n-MOS transistor through a quasi-standard semiconductor technology. This allows us to achieve a Non Volatile Memory cell and at the same time to compact capacitor-transistor ferroelectric cell into a one-transistor memory cell.

No abstract

No abstract