No abstract

No abstract

• A detailed summary on SFC-MS interfaces is given, with emphasis on current issues and potential solutions. • Differences between LC-MS and SFC-MS in terms of matrix effects generated are highlighted. • Sensitivity under SFC-MS has been demonstrated to be comparable to what it can be reached in LC-MS conditions. • Applications for SFC-MS are shifting towards the analysis of compounds with increasing polarity and analytes available in complex matrices.

This proof-of-concept work investigates the ultimate kinetic limits reachable in chiral supercritical fluid chromatography (SFC) with modern columns and advanced technological solutions. A commercial equipment (Waters Acquity UPC) has been in-house modified to minimize its overall extra-column variance through a series of technical adjustments including low-volume connecting tubings, reduced-volume flow cell, an in-house made external column oven, external low-dispersion injection system, and electronic temperature controller. Compared to the original (as-shipped) configuration, the extra-column variance on the low-dispersion equipment was reduced by more than 97%, from about 85 to slightly more than 2 μL (measured at 2.0 mL/min). This was mainly achieved thanks to the occurrence of fully developed turbulent regime with a proper selection of capillary i.d. at significantly smaller flow rates (1.5-4 mL/min; CO/methanol 80/20, v/v; 35 °C; back pressure regulator (BPR), 105 bar) than in entry-1 configuration. Ultrahigh efficiency columns of different geometries in-house packed with latest generation sub-2 μm UHPC-FPP-Whelk-O1 Chiral Stationary Phase (CSP) have been employed under sub- and supercritical fluid conditions. By carefully modulating the length and the internal diameter of connecting tubings in the function of column geometry, state of the art efficiencies (estimated in roughly 300 000 theoretical plates/m with reduced HETP of roughly 1.85) have been obtained on 4.6 mm i.d. chiral columns. Remarkably, for 3.0 mm × 100 mm (i.d. × length) columns, the efficiency gain on the fully modified SFC system (compared to an instrumental configuration where only the standard injector was replaced by the low-dispersion one) was greater than 90% for compounds with a retention factor of 1 and as large as 25% for retention factors of 2.5.

No abstract

No abstract

Enantioselective chromatography has been the preferred technique for the determination of enantiomeric excess across academia and industry. Although sequential multicolumn enantioselective supercritical fluid chromatography screenings are widespread, access to automated ultra-high-performance liquid chromatography (UHPLC) platforms using state-of-the-art small particle size chiral stationary phases (CSPs) is an underdeveloped area. Herein, we introduce a multicolumn UHPLC screening workflow capable of combining 14 columns (packed with sub-2 μm fully porous and sub-3 μm superficially porous particles) with nine mobile phase eluent choices. This automated setup operates under a vast selection of reversed-phase liquid chromatography, hydrophilic interaction liquid chromatography, polar-organic mode, and polar-ionic mode conditions with minimal manual intervention and high success rate. Examples of highly efficient enantioseparations are illustrated from the integration of chiral screening conditions and computer-assisted modeling. Furthermore, we describe the nuances of in silico method development for chiral separations via second-degree polynomial regression fit using LC simulator (ACD/Labs) software. The retention models were found to be very accurate for chiral resolution of single and multicomponent mixtures of enantiomeric species across different types of CSPs, with differences between experimental and simulated retention times of less than 0.5%. Finally, we illustrate how this approach lays the foundation for a streamlined development of ultrafast enantioseparations applied to high-throughput enantiopurity analysis and its use in the second dimension of two-dimensional liquid chromatography experiments.

At the forefront of chemistry and biology research, development timelines are fast‐paced and large quantities of pure targets are rarely available. Herein, we introduce a new framework, which is built upon an automated, online trapping‐enrichment multi‐dimensional liquid chromatography platform (TE‐Dt‐mDLC) that enables: 1) highly efficient separation of complex mixtures in a first dimension (1D‐UV); 2) automated peak trapping‐enrichment and buffer removal achieved through a sequence of H2O and D2O washes using an independent pump setup; and 3) a second dimension separation (2D‐UV‐MS) with fully deuterated mobile phases and fraction collection to minimize protic residues for immediate NMR analysis while bypassing tedious drying processes and minimizing analyte degradation. Diverse examples of target isolation and characterization from organic synthesis and natural product chemistry laboratories are illustrated, demonstrating recoveries above 90 % using as little as a few micrograms of material.