We investigated propagation of light through a uniaxial photonic metamaterial composed of three-dimensional gold helices arranged on a two-dimensional square lattice. These nanostructures are fabricated via an approach based on direct laser writing into a positive-tone photoresist followed by electrochemical deposition of gold. For propagation of light along the helix axis, the structure blocks the circular polarization with the same handedness as the helices, whereas it transmits the other, for a frequency range exceeding one octave. The structure is scalable to other frequency ranges and can be used as a compact broadband circular polarizer.
The past decade has witnessed intensive research efforts related to the design and fabrication of photonic crystals. These periodically structured dielectric materials can represent the optical analogue of semiconductor crystals, and provide a novel platform for the realization of integrated photonics. Despite intensive efforts, inexpensive fabrication techniques for large-scale three-dimensional photonic crystals of high enough quality, with photonic bandgaps at near-infrared frequencies, and built-in functional elements for telecommunication applications, have been elusive. Direct laser writing by multiphoton polymerization of a photoresist has emerged as a technique for the rapid, cheap and flexible fabrication of nanostructures for photonics. In 1999, so-called layer-by-layer or woodpile photonic crystals were fabricated with a fundamental stop band at 3.9 microm wavelength. In 2002, a corresponding 1.9 microm was achieved, but the important face-centred-cubic (f.c.c.) symmetry was abandoned. Importantly, fundamental stop bands or photonic bandgaps at telecommunication wavelengths have not been demonstrated. In this letter, we report the fabrication--through direct laser writing--and detailed characterization of high-quality large-scale f.c.c. layer-by-layer structures, with fundamental stop bands ranging from 1.3 to 1.7 microm.
In this tutorial review we highlight fundamental aspects of the physics underpinning the science of photonic crystals, provide insight into building-block assembly routes to the fabrication of different photonic crystal structures and compositions, discuss their properties and describe how these relate to function, and finally take a glimpse into future applications.
High-quality PbS nanocrystals were produced in multigram-scale quantities through a solventless, heterogeneous, and relatively green route. The heterogeneous nature of this reaction allows one to limit the diffusion in the system, allowing for unprecedented monodispersity and quality of the product demonstrated by a full-width at half-maximum of the photoluminescence peak (PL fwhm) as low as 52 meV, a Stokes shift as low as 10 meV, and a quantum yield (QY) of 40%. The growth of the nanocrystals is interpreted in the framework of a diffusion-controlled Ostwald growth in conditions of strong supersaturation.
Slow photon, or light with reduced group velocity, is a unique phenomenon found in photonic crystals that theoreticians have long suggested to be invaluable for increasing the efficiency of light-driven processes. This thesis demonstrates experimentally the feasibility of using slow photons to optically amplify photochemistry of both organic and inorganic systems. The effect of photonic properties on organic photochemistry was investigated by tracing out the wavelength-dependent rate of photoisomerization of azobenzene anchored on silica opals. The application of slow photons to inorganic photochemical processes was realized by molding nanocrystalline titania into an inverse opal structure and investigating its photodegradation efficiency in relation to the photonic properties. Changes in the photodegradation efficiency were directly linked to modifications of the electronic band gap absorption as a result of the photonic properties.The highest enhancement of twofold was achieved when the energy of the slow photons overlaps with the electronic band gap absorption, such that the loss of light due to photonic stop-band reflection was significantly reduced. In addition, the strength of slowphoton amplification with respect to the macroscopic structural order was studied by ii introducing controlled disorder via the incorporation of guest spheres into the opal templates. For the first time, a correlation between structural order, photonic properties and a photochemical process was established. The ability to combine slow-photon optical amplification with chemical enhancement was further achieved by incorporating platinum nanoparticles in inverse titania opals where the platinum nanoparticles increased the lifetimes of the higher population of electron-hole pairs arising from slow photon.Overall, various important factors governing the slow photon enhancement were investigated in detail, including the energy of the photonic stop band, angle dependence, thickness of the film, degree of structural order, filling fraction of the dielectric material and diffusion of a second medium if present. Theoretical calculations based on scalarwave approximation in support of the experimental findings were provided wherever possible. The findings provide a blueprint for achieving optical amplification using slow photons in the broad range of photochemical or photophysical processes.iii
Periodic nanostructures in photonics facilitate a far-reaching control of light propagation and light-matter interaction. This article reviews the current status of this subject, including both recent progress and well-established results. The primary focus is on the basic physical principles and potential applications associated with the existence of Bragg scattering, photonic band structures, and engineered effective-medium properties in periodic dielectric and metallo-dielectric systems. In addition, we discuss advantages and limitations of various theoretical and numerical approaches as well as of those fabrication techniques that have specifically been developed for this field.
Herein we report a novel self-assembly synthesis, structural and optical characterization of mesoporous Bragg stacks (MBS) composed of spin-coated multilayer stacks of mesoporous TiO(2) and mesoporous SiO(2). Investigation of the optical response of MBS to the infiltration of alcohols and alkanes into its pores reveals better sensitivity and selectivity than conventional Bragg reflectors. Furthermore, we demonstrate that the chemical sensing ability can be tuned via layer thickness, composition and surface properties.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.