We investigated propagation of light through a uniaxial photonic metamaterial composed of three-dimensional gold helices arranged on a two-dimensional square lattice. These nanostructures are fabricated via an approach based on direct laser writing into a positive-tone photoresist followed by electrochemical deposition of gold. For propagation of light along the helix axis, the structure blocks the circular polarization with the same handedness as the helices, whereas it transmits the other, for a frequency range exceeding one octave. The structure is scalable to other frequency ranges and can be used as a compact broadband circular polarizer.

We have previously shown that square arrays of three-dimensional gold helices can serve as compact broadband circular polarizers. Here, we show by heuristic reasoning supported by numerical calculations that the bandwidth of the device can realistically be increased to 1.5 octaves by tapering the gold-helix radius. The tapering also improves the extinction ratio. Depending on the side from which light impinges onto the tapered helices, the polarization conversions are different. Therefore, the structure is either optimal as polarizer or as analyzer. Corresponding structures for the infrared spectral range are fabricated by direct laser writing and gold electroplating.

We have recently shown that metamaterials composed of three-dimensional gold helices periodically arranged on a square lattice can be used as compact "thin-film" circular polarizers with one octave bandwidth. The physics of the motif of these artificial crystals is closely related to that of microwave sub-wavelength helical antennas in end-fire geometry. Here, we systematically study the dependence of the metamaterial's chiral optical properties on helix pitch, helix radius, two-dimensional lattice constant, wire radius, number of helix pitches, and angle of incidence. Our numerical calculations show that the optical properties are governed by resonances of the individual helices, yet modified by interaction effects. Furthermore, our study shows possibilities and limitations regarding performance optimization.

Metal-helix based metamaterials have been introduced as compact and broadband circular polarizers. However, the end of the metal wire together with the helix center defines an axis in space, which unavoidably breaks the rotational symmetry at the metamaterial surface. This introduces linear birefringence. Symmetry can be recovered by considering an integer number, e.g. N = 4, of intertwined helices arranged to a square array. We show that the operation principles are fundamentally different though. Metamaterial circular polarizers based on N = 4 helices, unlike single helices, inherently require absorption of the constituent metal. Otherwise, the combination of a four-fold rotational axis and time-inversion symmetry strictly forbids circular-polarizer action. Our symmetry analysis is confirmed by extensive numerical calculations comparing results for perfect electric conductors with those for a free-electron Drude metal with finite damping.

We demonstrate metamaterial metal-based bolometers, which take advantage of resonant absorption in that a spectral and/or polarization filter can be built into the bolometer. Our proof-of-principle gold-nanostructure-based devices operate around 1.5 \mum wavelength and exhibit room-temperature time constants of about 134 \mus. The ultimate detectivity is limited by Johnson noise, enabling room-temperature detection of 1 nW light levels within 1 Hz bandwidth. Graded bolometer arrays might allow for integrated spectrometers with several octaves bandwidth without the need for gratings or prisms and for integrated polarization analysis without external polarization optics