In this paper an overview of our developments towards industrialization of thin film silicon PV modules is presented. Amorphous silicon p-i-n solar cells have been developed in medium size single-chamber R&D KAI-M PECVD reactors. High initial efficiencies of 10.6 % and stabilized of 8.6 % could be achieved for a 1 cm 2 a-Si:H p-i-n solar cell of 0.20 µm thick ilayer deposited on TCO from Asahi U type (SnO 2 ). On our in-house developed LPCVD ZnO we could further improve the stabilized a-Si:H p-i-n efficiency to a similar level of 8.5 %. Incorporating such cells in commercial available front TCO of lower quality still leads to high initial mini-module aperture efficiencies (10 x 10 cm 2 ) of 9.1% and stabilized ones of 7.46% (independently measured by ESTI JRC-Ispra).Transferring the processes from the KAI-M to the industrial size 1.1x1.25 m 2 KAI-1200 R&D reactors resulted in a-Si:H modules of 110.6 W using commercial TCO, respectively 112.4 W when applying in-house developed LPCVD front ZnO. Both initial module performances have been independently measured by ESTI laboratories of JRC Ispra. A typical temperature coefficient for the module power of -0.22 %/∞C (relative loss) has been deduced from temperature dependent I-V characteristics at ESTI laboratories of JRC Ispra. Finally, micromorph mini-modules of 10 % initial aperture efficiency have been fabricated.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.