The design of palladium-based catalysts with improved selectivity, while maintaining high activity in hydrogenation reactions and avoiding the use of lead or ligands is still a major concern in heterogeneous catalysis. Here, a novel protocol has been proposed to prepare colloidal PdCu y nanoparticles with tailored metal composition, enabling a remarkable improvement in the semihydrogenation of alkynes when compared to pure Pd or a physical mixture of Cu and Pd catalysts. The PdCu y bimetallic catalyst with 1:4 Pd/Cu atom ratio showed the best performance. The synergistic effect between the closely contacting Pd and Cu species resulted in full conversion of alkyne and high alkene selectivity for a broad range of multifunctionalized substrates under very mild conditions (30 °C and 1 bar of H 2 ).

A B S T R A C TThe aim of this study was to determine the effective diffusion coefficient and the thermodynamic properties of Bauhinia forficata Link leaves, considering two forms of thickness measurements and to describe the process by fitting mathematical models. The leaves were collected, taken to the laboratory and prepared to start the drying process in which four temperatures (40, 50, 60 and 70 °C) were applied. After the drying process, the effective diffusion coefficient was determined through the theory of diffusion in liquid, allowing to obtain the values of the activation energy, enthalpy, entropy and Gibbs free energy. The description of the drying process was performed by setting the thirteen mathematical models used to represent constant drying of agricultural products. The Valcam model was selected to represent the drying kinetics B. forficata Link. Increased temperature promotes: decreasing enthalpy and entropy; increasing Gibbs free energy and effective diffusion coefficient. The effective diffusion coefficient is higher when the rib thickness is considered; thus, it is recommended to standardize and/or specify the points of measurement of leaf thickness.Propriedades termodinâmicas e cinética de secagem de folhas de Bauhinia forficata Link R E S U M O Objetivou-se, neste trabalho, determinar o coeficiente de difusão efetivo e as propriedades termodinâmicas das folhas de Bauhinia forficata Link, considerando-se duas formas de medição de espessura, bem como descrever o processo de secagem por meio do ajuste de modelos matemáticos. As folhas foram coletadas, levadas ao laboratório e preparadas para dar início ao processo de secagem em quatro temperaturas (40, 50, 60 e 70 °C). Após a secagem determinou-se o coeficiente de difusão efetivo por meio da teoria da difusão líquida permitindo a obtenção dos valores da energia de ativação, entalpia, entropia e energia livre de Gibbs. Já a descrição do processo de secagem foi realizada por meio do ajuste de treze modelos matemáticos constantemente utilizados para representação de secagem de produtos agrícolas. O modelo de Valcam foi selecionado para representar a cinética de secagem de folhas de B. forficata Link. O aumento da temperatura promove: decréscimo de entalpia e entropia; aumento da energia livre de Gibbs e do coeficiente de difusão efetivo. O coeficiente de difusão efetivo é maior quando se considera a espessura da nervura, recomendando-se a padronização e/ou especificação dos pontos de medição da espessura da folha.

Buckwheat is a prominent crop in present-day agriculture due to its nutraceutical properties; however, information on this crop regarding the post-harvest process is scarce, as well as the characterization of its physical properties and such information is essential for the development and improvement of machinery used in post-harvest processes. Thus, the objective of this study was to determine the volumetric shrinkage, porosity, bulk density and true density of buckwheat grains throughout the drying process, as well as to fit mathematical models to the experimental values of true and bulk volumetric shrinkages. Buckwheat grains of the cultivar IPR 91 - Baili with an initial moisture content of 0.250 (decimal, dry basis.) were used. The samples used to determine the physical properties were subjected to oven drying with forced air circulation stabilized at 40 ± 1 °C. The mass of the samples was periodically weighed, so that when the product reached predetermined values of moisture content, the samples were removed and their physical properties were determined. It is concluded that the reduction in moisture content during drying causes increase in bulk density, true density and porosity. The reduction of the moisture content influences bulk volumetric shrinkage and true volumetric shrinkage of the grains, causing reductions in their values of approximately 14.47 and 14.70%, respectively, and a linear model can represent both variables satisfactorily.