Semiconducting MoS₂(₁-x) Se₂x mono-layers where x = 0-0.40 are successfully grown over large areas. A random arrangement of the S and Se atoms and a tunable bandgap photoluminescence are observed. Atomically thin, 2D semiconductor alloys with tunable bandgaps have potential applications in nano- and opto-electronics. Field-effect transistors fabricated with the monolayers exhibit high on/off ratios of >10(5).
Single-crystal silicon nanostructures have attracted much attention in recent years due in part to their unique optical properties. In this work, we demonstrate direct fabrication of single-crystal silicon nanotubes with sub-10 nm walls which show low reflectivity. The fabrication was based on a cryogenic inductively coupled plasma reactive ion etching process using high-resolution hydrogen silsesquioxane nanostructures as the hard mask. Two main etching parameters including substrate low-frequency power and SF6/O2 flow rate ratio were investigated to determine the etching mechanism in the process. With optimized etching parameters, high-aspect-ratio silicon nanotubes with smooth and vertical sub-10 nm walls were fabricated. Compared to commonly-used antireflection silicon nanopillars with the same feature size, the densely packed silicon nanotubes possessed a lower reflectivity, implying possible potential applications of silicon nanotubes in photovoltaics.
Pixelated polarizer array can be used in the real-time measurement of Stokes parameters. In this paper, pixelated polarizer array based on the aluminum nano-grating is designed and fabricated, and the fabrication technology is electron beam exposure technology. The size of each unit is 7.4 μm, and the polarization directions of each adjacent 2×2 units in the polarizer array are 0, π/4, π/2, and 3π/4. The period, duty cycle, depth and surface type of the grating are 140 nm, 0.5, 100 nm and rectangle type, respectively. The scanning electron micrographs of the pixelated polarizer array show that there is no disconnection, cross and pollution on the fabricated metal nano-grating lines. The nano-grating lines are straight and uniform in thickness, and the surface type of the grating is ideal rectangular type. The polarization optical micrographs show that the pixelated polarizer array has good polarization characteristics. The maximum polarization transmissivity can reach 79.3%, and the extinction ratio can arrive at 454. Furthermore, the pixelated polarizer array is integrated with the charge coupled devise chip, and the Stokes parameters can be calculated from one frame, then the degree of linear polarization and angle of linear polarization can be obtained. Thus, the polarization enhancement of image is achieved, which can be used in the anti-stealth and recognition.
The uncooled IR thermal imaging technology with its wide applications in military, medical and industrial areas has been an active topic in international research. Thermal imaging based on optical readout bi-material microcantilever array is a new concept in methodology. In this paper, a new kind of bi-material micro-cantilever unit with multi-fold legs and interval gild structure is designed and its thermal and thermo-mechanical performance are analylized. A 100×100 microcantilever array is fabricated as a FPA (focal plane array), and by using this FPA, a thermal image of a room-temperature body (human body) is successfully detected. The NETD (noise-equivalent temperature difference) is about 200mK.The experimental results are well accordant with the thermal analysis of the microcantilever unit.
This article presents a microfabricated 96-well wound-healing assay enabling high-throughput measurement of cellular migration capabilities. Within each well, the middle area is the wound region, made of microfabricated gold surface with self-assembled PEG repellent for cell seeding. After the formation of a cellular confluent monolayer around the wound region, collagen solution was applied to form three-dimensional matrix to cover the PEG surface, initiating the wound-healing process. By interpreting the numbers of migrated cells into the wound regions as a function of specific stimuli with different concentrations, EC50 (half-maximal effective concentration) was obtained. Using H1299 as a model, values of EC50 were quantified as 8% and 160 ng/ml for fetal bovine serum and CXCL12, respectively. In addition, the values of EC50 were demonstrated not to be affected by variations in compositions of extracellular matrix and geometries of wounds, which can thus be regarded as an intrinsic marker. Furthermore, the migration capabilities of a second cell type (HeLa) were characterized by the developed wound-healing assay, producing EC50 of 2% when fetal bovine serum was used as the stimuli. These results validated the proposed high-throughput wound-healing assay, which may function as an enabling tool in studying cellular capabilities of migration and invasion. © 2017 International Society for Advancement of Cytometry.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.