Biomimetic enzyme cascade reaction systems in microcapsules are developed for mimicking biocatalysis of organelles.

Skin interstitial fluid (ISF) is considered as an emerging source of biomarkers with physiological and medical significance. Microneedle arrays (MNs) provide a promising means for painless, noninvasive detection of these biomarkers. Here, novel MNs integrated with photonic crystal (PhC) barcodes are presented, and multiplex specific detection of ISF biomarkers is realized for the first time. The PhC barcodes‐loaded flexible MNs are simply fabricated by replicating dynamic ferrofluid‐cast micromoldings. When the prepared MNs are inserted into skin, they can enrich specific biomarkers to their probes‐decorated PhC barcodes. Thus, by adding corresponding fluorescent probes to form sandwich immunocomplexes, the relative content of the biomarkers can be read out through the fluorescence intensity of the barcodes; meanwhile, the species of these biomarkers can be clearly distinguished by the reflection peaks of the PhC barcodes. Based on the encoded MNs, their sensitivity, flexibility, and versatility of capturing and detecting three inflammatory cytokines are demonstrated in a sepsis mice model. Compared with existing MNs for ISF detection, the encoded MNs not only possess equivalent detection effects with less post‐processing and simplified procedures, but can also detect multiple biomarkers simultaneously, which makes them ideal in many clinical and biomedical detection areas.

The manipulation of liquid droplets demonstrates great importance in various areas from laboratory research to our daily life. Here, inspired by the unique microstructure of plant stomata, we present a surface with programmable wettability arrays for droplets manipulation. The substrate film of this surface is constructed by using a coaxial capillary microfluidics to emulsify and pack graphene oxide (GO) hybridN-isopropylacrylamide (NIPAM) hydrogel solution into silica nanoparticles-dispersed ethoxylated trimethylolpropane triacrylate (ETPTA) phase. Because of the distribution of the silica nanoparticles on the ETPTA interface, the outer surface of the film could achieve favorable hydrophobic property under selective fluorosilane decoration. Owing to the outstanding photothermal energy transformation property of the GO, the encapsulated hydrophilic hydrogel arrays could shrink back into the holes to expose their hydrophobic surface with near-infrared (NIR) irradiation; this imparts the composite film with remotely switchable surface droplet adhesion status. Based on this phenomenon, we have demonstrated controllable droplet sliding on programmable wettability pathways, together with effective droplet transfer for printing with mask integration, which remains difficult to realize by existing techniques.

This review comprehensively discusses recent advances in the basic components, controlling methods and especially in the applications of biohybrid robots.

Droplet manipulation is playing an important role in various fields, including scientific research, industrial production, and daily life. Here, inspired by the microstructures and functions of Namib desert beetles, Nepenthes pitcher plants, and emergent aquatic plants, we present a multibioinspired slippery surface for droplet manipulation by employing combined strategies of bottom-up colloidal self-assembly, top-down photolithography, and microstructured mold replication. The resultant multilayered hierarchical wettability surface consists of hollow hydrogel bump arrays and a lubricant-infused inverse opal film as the substrate. Based on capillary force, together with slippery properties of the substrate and wettability of the bump arrays, water droplets from all directions can be attracted to the bumps and be collected through hollow channels to a reservoir. Independent of extra energy input, droplet condensation, or coalescence, these surfaces have shown ideal droplet pumping and water collection efficiency. In particular, these slippery surfaces also exhibit remarkable features including versatility, generalization, and recyclability in practical use such as small droplet collection, which make them promising candidates for a wide range of applications.

Biological soft robots have attracted extensive attention and research because of their superiority in executing designed biomedical missions compared with conventional robots. Here, inspired by the crawling mechanism of snakes and caterpillars, a novel biological soft robot composed of asymmetric claws, a carbon nanotube (CNT)-induced myocardial tissue layer, and a structural color indicator is presented. The asymmetric claws can assist the whole soft robot to accomplish directional movement during the cardiomyocytes' contraction process. The oriented conduct of the CNT layer can regulate the cardiomyocytes' arrangement and improve their beating capability and the contraction performance. However, the structural color indicator provides a visualized monitoring approach to dynamically and immediately reflect the motion status of the biological soft robots. With these three functional layers, the cardiomyocyte-driven soft robot can greatly simulate the crawling behavior of a caterpillar. It is demonstrated that by integrating these soft robots in a microfluidic organ-on-a-chip system with multitrack construction, they can run along the tracks and exhibit different running speed based on the stimulus concentrations in the tracks. These features indicate the potential values of the cardiomyocyte-driven soft robots for providing an effective screening platform for clinical diseases.

As nanomaterials (NMs) possess attractive physicochemical properties that are strongly related to their specific sizes and morphologies, they are becoming one of the most desirable components in the fields of drug delivery, biosensing, bioimaging, and tissue engineering. By choosing an appropriate methodology that allows for accurate control over the reaction conditions, not only can NMs with high quality and rapid production rate be generated, but also designing composite and efficient products for therapy and diagnosis in nanomedicine can be realized. Recent evidence implies that microfluidic technology offers a promising platform for the synthesis of NMs by easy manipulation of fluids in microscale channels. In this Review, a comprehensive set of developments in the field of microfluidics for generating two main classes of NMs, including nanoparticles and nanofibers, and their various potentials in biomedical applications are summarized. Furthermore, the major challenges in this area and opinions on its future developments are proposed.

Wound healing is a complex physiological process that involves coordinated phases such as inflammation and neovascularization. Attempts to promote the healing process tend to construct an effective delivery system based on different drugs and materials. In this paper, we propose novel MXene-integrated microneedle patches with adenosine encapsulation for wound healing. Owing to the dynamic covalent bonding capacity of boronate molecules with adenosine, 3-(acrylamido)phenylboronic acid- (PBA-) integrated polyethylene glycol diacrylate (PEGDA) hydrogel is utilized as the host material of microneedle patches. Benefitting from photothermal conversion capacity of MXene, the release of loaded adenosine could be accelerated under NIR irradiation for maintaining the activation signal around injury site. In vitro cell experiments proved the effect of MXene-integrated microneedle patches with adenosine encapsulation in enhancing angiogenesis. When applied for treating animal models, it is demonstrated that the microneedle patches efficiently promote angiogenesis, which is conductive to wound healing. These features make the proposed microneedle patch potential for finding applications in wound healing and other biomedical fields.