+7 9117294724 1. AbstractThis work proposes new chemical and mechanical materials and techniques for III-V semiconductor NW/silicone membrane formation and optoelectronic device fabrication. Molecular beam epitaxy (MBE)-synthesized n-, p-and i-GaP NWs were encapsulated by introduced G-coating method into synthesized polydimethylsiloxane-graft-polystyrene and released from the Si growth substrate. The fabricated membranes were contacted with different materials including single-walled carbon nanotubes or ferrocenyl-containing polymethylhydrosiloxane with and without multi-walled carbon nanotubes doping. The electrical connection of the fabricated membranes was verified by electron beam induced current (EBIC) spectroscopy. The developed methods and materials can be applied for fabrication of high quality flexible inorganic optoelectronic devices. IntroductionThe appealing properties of organic light emitting diodes (OLEDs), i. e. relatively easy and inexpensive fabrication, and efficient electroluminescence (EL) allowed the OLED-based industry to conquer a significant market share. For instance, modern smartphones are mostly produced with the OLED displays [weblink1, weblink2]. However, organic materials are far behind the inorganic materials in terms of stability and external quantum efficiency (EQE) of EL

Flexible optoelectronic structures are required in a wide range of applications. Large scale modified silicone-embedded n-GaP nanowire arrays of a record 6 µm thin membranes were studied. A homogeneous silicone encapsulation was enabled by G-coating using a heavy-load centrifuge. The synthesized graft-copolymers of polydimethylsiloxane (PDMS) and polystyrene demonstrated two times lower adhesion to Si compared to standard PDMS, allowing 3 square inch area high quality silicone/nanowire membrane mechanical release, preserving the growth Si substrate for a further re-use after chemical cleaning. The 90% transparent single-walled carbon nanotubes electrical contacts to the embedded n-GaP nanowires demonstrated mechanical and electrical stability. The presented methods can be used for the fabrication of large scale flexible inorganic optoelectronic devices.

Controlled growth of heterostructured nanowires and mechanisms of their formation have been actively studied during the last decades due to perspectives of their implementation. Here, we report on the self-catalyzed growth of axially heterostructured GaPN/GaP nanowires on Si(111) by plasma-assisted molecular beam epitaxy. Nanowire composition and structural properties were examined by means of Raman microspectroscopy and transmission electron microscopy. To study the optical properties of the synthesized nanoheterostructures, the nanowire array was embedded into the silicone rubber membrane and further released from the growth substrate. The reported approach allows us to study the nanowire optical properties avoiding the response from the parasitically grown island layer. Photoluminescence and Raman studies reveal different nitrogen content in nanowires and parasitic island layer. The effect is discussed in terms of the difference in vapor solid and vapor liquid solid growth mechanisms. Photoluminescence studies at low temperature (5K) demonstrate the transition to the quasi-direct gap in the nanowires typical for diluted nitrides with low N-content. The bright room temperature photoluminescent response demonstrates the potential application of nanowire/polymer matrix in flexible optoelectronic devices.

We propose and demonstrate both flexible and stretchable blue light-emitting diodes based on core/shell InGaN/GaN quantum well microwires embedded in polydimethylsiloxane membranes with strain-insensitive transparent electrodes involving single-walled carbon nanotubes. InGaN/GaN core-shell microwires were grown by metal-organic vapor phase epitaxy, encapsulated into a polydimethylsiloxane film, and then released from the growth substrate. The fabricated free-standing membrane of light-emitting diodes with contacts of single-walled carbon nanotube films can stand up to 20% stretching while maintaining efficient operation. Membrane-based LEDs show less than 15% degradation of electroluminescence intensity after 20 cycles of stretching thus opening an avenue for highly deformable inorganic devices.

We demonstrate flexible red light-emitting diodes based on axial GaPAs/GaP heterostructured nanowires embedded in polydimethylsiloxane membranes with transparent electrodes involving single-walled carbon nanotubes. The GaPAs/GaP axial nanowire arrays were grown by molecular beam epitaxy, encapsulated into a polydimethylsiloxane film, and then released from the growth substrate. The fabricated free-standing membrane of light-emitting diodes with contacts of single-walled carbon nanotube films has the main electroluminescence line at 670 nm. Membrane-based light-emitting diodes (LEDs) were compared with GaPAs/GaP NW array LED devices processed directly on Si growth substrate revealing similar electroluminescence properties. Demonstrated membrane-based red LEDs are opening an avenue for flexible full color inorganic devices.