<p>El artículo que se expone a continuación es parte del resultado de un trabajo de investigación realizado en la Universidad Politécnica de Madrid. A lo largo de este artículo se analiza el proyecto para el aeropuerto de Murcia realizado por Fernando Higueras bajo el asesoramiento de Félix Candela en el año 1982.</p><p>En él se incluyen la documentación original inédita del proyecto, conservada en los depósitos del Colegio Oficial de Arquitectos de Madrid y de Cataluña, así como planos e infografías realizados por los autores del artículo para la reconstitución gráfica y posteriores estudio y análisis del aeropuerto.</p><p>La geometría del proyecto se genera mediante superficies parabólico hiperbólicas, emulando la estructura de paraguas invertido que Candela desarrolló en la década de los años 50. De haberse llegado a construir, hubiera supuesto la mayor estructura de este tipo jamás realizada por Félix Candela; contaba con voladizos de 12 metros apoyados en un único pilar.</p>
The 1972 dome to cover the Anoeta Velodrome is the product of the experiences up to that date of the architects Emilio Pérez Piñero and Félix Candela, specialists, respectively, in the design of deployable reticular structures and thin concrete shells using hyperbolic paraboloids. It is a very relevant project in the careers of both architects, as the Anoeta dome was Pérez Piñero’s last project, and also the last of the domes in which Candela participated since 1965. Pérez Piñero’s death in 1972 marked the end of a phase in Candela’s life. This paper describes the virtual reconstruction of a variation of the project and analyses its geometry, based on the subdivision of the sphere into polygons onto which hyperbolic paraboloids were then inserted. New documentation is provided which offers context for the evolution of Candela’s work, linking this project to his previous major work: the Palacio de los Deportes built for the 1968 Mexico Olympics.
<p>El trabajo que se expone a continuación es parte del resultado de un trabajo de investigación realizado en la Universidad Politécnica de Madrid. A lo largo de este artículo se analiza el proyecto para las instalaciones deportivas de la Universidad Brown, realizado por Félix Candela en asociación con Cutting-Praeger durante los años 1965-1972.<br />En el artículo se incluye la documentación original conservada en el depósito de la “Avery Architectural and Fine Arts Library”, así como algunos de los planos e infografías realizados para la reconstitución gráfica del proyecto. A partir de éstos hemos podido analizar el complejo trazado geométrico de la cúpula generado a partir de una subdivisión de la esfera que determina la disposición de las bóvedas parabólico-hiperbólicas que conforman el cerramiento.</p><p>El trabajo realizado nos permite a su vez visualizar un proyecto que por diversas circunstancias no llegó a construirse nunca.</p>
El propósito del presente artículo es la reconstrucción tanto gráfica como virtual del proyecto para la ciudad utópica The Walking City, realizado por Ron Herron en 1964 y publicado en el magazine arquitectónico Archigram.El objetivo principal del trabajo consiste en generar una simulación del proyecto que permitiera a los usuarios no solamente visitar la ciudad de manera virtual, sino interactuar con ella, habitarla y llegar a sentirla.El artículo incluye la documentación gráfica realizada previamente a la generación del modelo en realidad virtual. Ésta se ha configurado como elemento fundamental para el análisis del proyecto, complementando a los documentos originales existentes acerca del mismo.Se expone el flujo de trabajo que se llevado a cabo desde la elaboración de los documentos iniciales hasta el trabajo en motores de videojuegos para su uso en sistemas de realidad virtual.
En las últimas décadas las estructuras recíprocas han encontrado una nueva utilidad vinculada a la ejecución de obras temporales y reciclables en línea con las tendencias actuales en arquitectura sostenible. El objetivo de este trabajo consiste en analizar el comportamiento de puentes de madera con estructura recíproca. Se realizó un modelo numérico y se compararon las respuestas estructurales del puente tradicional chino y el puente desmontable de Leonardo. El modelo se verificó midiendo la deformación de un puente real construido en taller. Además del comportamiento mecánico se estudió el mecanismo de transmisión de cargas, la influencia del rozamiento, la estabilidad lateral y la robustez. El puente chino trabaja fundamentalmente a compresión, acercándose más al comportamiento de un arco funicular, y transmitiendo una carga horizontal en los apoyos del orden de tres veces mayor que el puente de Leonardo, que trabaja fundamentalmente a flexión y con niveles de agotamiento y deformación mayores.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.