No abstract

While the emerging wire-shaped supercapacitors (WSS) have been demonstrated as promising energy storage devices to be implemented in smart textiles, challenges in achieving the combination of both high mechanical stretchability and excellent electrochemical performance still exist. Here, an asymmetric configuration is applied to the WSS, extending the potential window from 0.8 to 1.5 V, achieving tripled energy density and doubled power density compared to its asymmetric counterpart while accomplishing stretchability of up to 100% through the prestrainning-then-buckling approach. The stretchable asymmetric WSS constituted of MnO2/CNT hybrid fiber positive electrode, aerogel CNT fiber negative electrode and KOH-PVA electrolyte possesses a high specific capacitance of around 157.53 μF cm(-1) at 50 mV s(-1) and a high energy density varying from 17.26 to 46.59 nWh cm(-1) with the corresponding power density changing from 7.63 to 61.55 μW cm(-1). Remarkably, a cyclic tensile strain of up to 100% exerts negligible effects on the electrochemical performance of the stretchable asymmetric WSS. Moreover, after 10,000 galvanostatic charge-discharge cycles, the specific capacitance retains over 99%, demonstrating a long cyclic stability.

Due to their exceptional flexibility and transparency, CVD graphene films have been regarded as an ideal replacement of indium tin oxide for transparent electrodes, especially in applications where electronic devices may be subjected to large tensile strain. However, the search for a desirable combination of stretchability and electrochemical performance of such devices remains a huge challenge. Here, we demonstrate the implementation of a laminated ultrathin CVD graphene film as a stretchable and transparent electrode for supercapacitors. Transferred and buckled on PDMS substrates by a prestraininig-then-buckling strategy, the four-layer graphene film maintained its outstanding quality, as evidenced by Raman spectra. Optical transmittance of up to 72.9% at a wavelength of 550 nm and stretchability of 40% were achieved. As the tensile strain increased up to 40%, the specific capacitance showed no degradation and even increased slightly. Furthermore, the supercapacitor demonstrated excellent frequency capability with small time constants under stretching.

Immediate hemorrhage control and anti-infection play important roles in the wound management. Besides, a moist environment is also beneficial for wound healing. Hydrogels are promising materials in urgent hemostasis and drug release. However, hydrogels have the disadvantage of rapid release profiles, leading to the exposure to high drug concentrations. In this study, we constructed hybrid hydrogels with rapid hemostasis and sustainable antibacterial property combining aminoethyl methacrylate hyaluronic acid (HA-AEMA) and methacrylated methoxy polyethylene glycol (mPEG-MA) hybrid hydrogels and chlorhexidine diacetate (CHX)-loaded nanogels. The CHX-loaded nanogels (CLNs) were prepared by the enzyme degradation of CHX-loaded lysine-based hydrogels. The HA-AEMA and mPEG-MA hybrid hydrogel loaded with CLNs (labeled as Gel@CLN) displayed a three-dimensional microporous structure and exhibited excellent swelling, mechanical property, and low cytotoxicity. The Gel@CLN hydrogel showed a prolonged release period of CHX over 240 h and the antibacterial property over 10 days. The hemostasis and wound-healing properties were evaluated in vivo using a mouse model. The results showed that hydrogel had the rapid hemostasis capacity and accelerated wound healing. In summary, CLN-loaded hydrogels may be excellent candidates as hemostasis and anti-infection materials for the wound dressing application.

In this work, new investigations on the effect of comonomer sequential structure on the thermal and crystallization behaviors and biodegradability have been implemented for the biodegradable poly(butylene succinate‐co‐butylene terephthalate) (PBST) as well as aliphatic poly(butylene succinate) (PBS). At first, these copolyesters were efficiently synthesized from dimethyl succinate and/or dimethyl terephthalate and 1,4‐butanediol via condensation polymerization in bulk. Subsequently, their molecular weights and macromolecular chain structures were analyzed by gel permeation chromatography (GPC) and nuclear magnetic resonance (NMR) spectroscopy. By means of differential scanning calorimeter (DSC) and wide‐angle X‐ray diffractometer (WAXD), thermal and crystallization behaviors of these synthesized aromatic–aliphatic copolyesters were further explored. It was demonstrated that the synthesized copolyesters were revealed to have random comonomer sequential structures with thermal and crystallization properties strongly depending on their comonomer molar compositions, and that crystal lattice structures of the new crystallizable copolyesters shifted from the monoclinic crystal of semicrystalline PBS to triclinic lattice of the poly(butylene terephthalate) (PBT) with increasing the terephthalate comonomer composition, and the minor comonomer components were suggested to be trapped in the crystallizable component domains as defects. In addition, the enzymatic degradability was also characterized for the copolyesters film samples. © 2006 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 44: 1635–1644, 2006