Due to their exceptional flexibility and transparency, CVD graphene films have been regarded as an ideal replacement of indium tin oxide for transparent electrodes, especially in applications where electronic devices may be subjected to large tensile strain. However, the search for a desirable combination of stretchability and electrochemical performance of such devices remains a huge challenge. Here, we demonstrate the implementation of a laminated ultrathin CVD graphene film as a stretchable and transparent electrode for supercapacitors. Transferred and buckled on PDMS substrates by a prestraininig-then-buckling strategy, the four-layer graphene film maintained its outstanding quality, as evidenced by Raman spectra. Optical transmittance of up to 72.9% at a wavelength of 550 nm and stretchability of 40% were achieved. As the tensile strain increased up to 40%, the specific capacitance showed no degradation and even increased slightly. Furthermore, the supercapacitor demonstrated excellent frequency capability with small time constants under stretching.

Graphene films grown on metal substrates by chemical vapor deposition (CVD) method have to be safely transferred onto desired substrates for further applications. Recently, a roll-to-roll (R2R) method has been developed for large-area transfer, which is particularly efficient for flexible target substrates. However, in the case of rigid substrates such as glass or wafers, the roll-based method is found to induce considerable mechanical damages on graphene films during the transfer process, resulting in the degradation of electrical property. Here we introduce an improved dry transfer technique based on a hot-pressing method that can minimize damage on graphene by neutralizing mechanical stress. Thus, we enhanced the transfer efficiency of the large-area graphene films on a substrate with arbitrary thickness and rigidity, evidenced by scanning electron microscope (SEM) and atomic force microscope (AFM) images, Raman spectra, and various electrical characterizations. We also performed a theoretical multiscale simulation from continuum to atomic level to compare the mechanical stresses caused by the R2R and the hot-pressing methods, which also supports our conclusion. Consequently, we believe that the proposed hot-pressing method will be immediately useful for display and solar cell applications that currently require rigid and large substrates.

Recently, carbon materials such as carbon nanotubes and graphene have been proposed as alternatives to indium tin oxide (ITO) for fabricating transparent conducting materials. However, obtaining low sheet resistance and high transmittance of these carbon materials has been challenging due to the intrinsic properties of the materials. In this paper, we introduce highly transparent and flexible conductive films based on a hybrid structure of graphene and an Ag-grid. Electrohydrodynamic (EHD) jet printing was used to produce a micro-scale grid consisting of Ag lines less than 10 μm wide. We were able to directly write the Ag-grid on a large-area graphene/flexible substrate due to the high conductivity of graphene. The hybrid electrode could be fabricated using hot pressing transfer and EHD jet printing in a non-vacuum, maskless, and low-temperature environment. The hybrid electrode offers an effective and simple route for achieving a sheet resistance as low as ∼4 Ω per square with ∼78% optical transmittance. Finally, we demonstrate that transparent flexible heaters based on the hybrid conductive films could be used in a vehicle or a smart window system.

No abstract

Dielectrophoresis has received considerable attention for separating nanotubes according to electronic types. Here we examine the effects of surface conductivity of semiconducting single walled carbon nanotubes (SWNT), induced by ionic surfactants, on the sign of dielectrophoretic force. The crossover frequency of semiconducting SWNT increases rapidly as the conductivity ratio between the particle and medium increases, leading to an incomplete separation of ionic surfactant suspended SWNT at an electric field frequency of 10 MHz. To reduce the conductivity ratio, the surface charge of SWNT is neutralized by an equimolar mixture of anionic surfactant sodium dodecyl sulfate (SDS) and cationic surfactant cetyltrimethylammonium bromide (CTAB), resulting in negative dielectrophoresis of semiconducting species at 10 MHz. A comparative Raman spectroscopy study shows a nearly complete separation of metallic SWNT.

A tactile display is an important tool to help humans interact with machines by using touch. In this paper, we present a transparent and stretchable graphene-based actuator for advanced tactile displays. The proposed actuator is composed of transparent and compliant graphene electrodes and a dielectric elastomer substrate. Since the electrode is coated onto the appointed region of the substrate layer by layer, only the area of the dielectric elastomer substrate with electrodes bumps up in response to the input voltage, which consequently produces actuation. The actuator is proven to be operable while preserving its electrical and mechanical properties even under 25% stretching. Also, the simple fabrication of the proposed actuator is cost-effective and can easily be extended to multiple arrays. The actuator is expected to be applicable to various applications including tactile displays, vari-focal lenses etc.

Alternating current dielectrophoresis has attracted considerable attention as a possible candidate to separate single-walled carbon nanotubes according to electronic types. Recently, the significant effect of surface charge on the polarizability of semiconducting nanotubes was demonstrated using comparative Raman spectroscopic studies. Here we present electrical transport characteristics of surface-charge-controlled, dielectrophoretically deposited nanotube arrays. The surface charge was controlled using cationic/anionic surfactant mixtures. Complete separation between metallic and semiconducting species was achieved at the electric field frequency of 10 MHz only when the surface charge of nanotubes was neutralized, which is consistent with previous Raman investigation. A theoretical analysis, using zeta potential information as input, further supported the experimental observation.

Carbon nanotubes (CNTs) have advantages as conductive fillers due to their large aspect ratio and excellent conductivity. In this study, a novel silver/conducting polymer composite was developed by the incorporation of silver-plated CNTs. It is important to achieve a homogeneous dispersion of nanotubes and to improve the interfacial bonding to utilize the excellent properties of reinforcements in the matrix material. The homogeneous dispersion of nanotubes was achieved by an acid treatment process, and the interfacial contact was improved by electroless silver plating around nanotubes. The resistivity of the silver/conducting polymer composite was decreased by 83% by the addition of silver-plated single-walled carbon nanotubes. Conductive bumps were also screen-printed to demonstrate the capability of the composite as electrical interconnects for multi-layer printed circuit boards.