Nowadays, magnetic hyperthermia constitutes a complementary approach to cancer treatment. The use of magnetic particles as heating mediators, proposed in the 1950s, provides a novel strategy for improving tumor treatment and, consequently, patient quality of life. This review reports a broad overview about several aspects of magnetic hyperthermia addressing new perspectives and the progress on relevant features such as the ad hoc preparation of magnetic nanoparticles, physical modeling of magnetic heating, methods to determine the heat dissipation power of magnetic colloids including the development of experimental apparatus and the influence of biological matrices on the heating efficiency.Comment: 104 pages, 28 figures. Manuscript accepted for publication in Applied Physics Review

We report a direct observation of the intrinsic magnetization behavior of Au in thiol-capped gold nanoparticles with permanent magnetism at room temperature. Two element specific techniques have been used for this purpose: X-ray magnetic circular dichroism on the L edges of the Au and 197Au Mössbauer spectroscopy. Besides, we show that silver and copper nanoparticles synthesized by the same chemical procedure also present room-temperature permanent magnetism. The observed permanent magnetism at room temperature in Ag and Cu dodecanethiol-capped nanoparticles proves that the physical mechanisms associated to this magnetization process can be extended to more elements, opening the way to new and still not-discovered applications and to new possibilities to research basic questions of magnetism.

Theoretical positron lifetime values have been calculated systematically for most of the elements of the periodic table. Self-consistent and non-self-consistent schemes have been used for the calculation of the electronic structure in the solid, as well as different parametrizations for the positron enhancement factor and correlation energy. The results obtained have been studied and compared with experimental data, confirming the theoretical trends. As is known, positron lifetimes in bulk show a periodic behaviour with atomic number. These calculations also confirm that monovacancy lifetimes follow the same behaviour. The effects of enhancement factors used in calculations have been commented upon. Finally, we have analysed the effects that f and d electrons have on positron lifetimes.

In the present paper, a lab-made electromagnetic applicator for magnetic hyperthermia experiments is described, fabricated and tested. The proposed device is able to measure the specific absorption rate (SAR) of nanoparticle samples at different magnetic field intensities and frequencies. Based on a variable parallel LCC resonant circuit fed by a linear power amplifier, the electromagnetic applicator is optimized to generate a controllable and homogeneous AC magnetic field in a 3.5 cm3 cylindrical volume, in a wide frequency range of 149–1030 kHz with high field intensities (up to 35 kA m−1 at low frequencies and up to 22 kA m−1 at high frequencies). In addition, a lab-made AC magnetometer is integrated in the electromagnetic applicator. The AC magnetometer is fully compensated to provide accurate measurements of the dynamic hysteresis cycle for nanoparticle powders or dispersions. From these dynamic hysteresis loops the SAR of the nanoparticle samples can be directly obtained. To show the capabilities of the proposed set-up, the AC hysteresis loops of two different magnetite nanoparticle samples with different sizes have been measured for various field intensities and frequencies. To our knowledge, no other work reports an electromagnetic applicator system with integrated AC magnetometer providing such characteristics in terms of frequency and intensity.

No abstract

ABSTRACT:The polyol route is a versatile and up-scalable method to produce large batches of iron oxide nanoparticles with well-defined structure and magnetic properties. Controlling parameters such as temperature and duration of reaction, heating profile, nature of polyol solvent or of organometallic precursors were reported in previous studies of literature, but none of them described yet the crucial role of water in the forced hydrolysis pathway, whose presence is mandatory for nanoparticle production. This communication investigates the influence of the water amount and temperature at which it is injected in the reflux system for either pure polyol or mixture with a poly(hydroxy) amine. Distinct morphologies of nanoparticles were thereby obtained, from ultra-ultra-small smooth spheres down to 4 nm in diameter to large ones up to 37 nm in diameter. Nanoflowers were also synthesized, which are well-defined multi-core assemblies with narrow grain size dispersity. A diverse and large library of samples was obtained by playing on the nature of solvents and amount of water traces while keeping all the other parameters fixed. The varied morphologies lead to magnetic nanoparticles well-fitting to required applications among magnetic hyperthermia and MRI contrast agent, or both.

Magnetic nanoparticles (NPs) are intensively studied for their potential use for magnetic hyperthermia, a treatment that has passed a phase II clinical trial against severe brain cancer (glioblastoma) at the end of 2011. Their heating power, characterized by the 'specific absorption rate (SAR)', is often considered temperature independent in the literature, mainly because of the difficulties that arise from the measurement methodology. Using a dynamic magnetometer presented in a recent paper, we measure here the thermal dependence of SAR for superparamagnetic iron oxide (maghemite) NPs of four different size-ranges corresponding to mean diameters around 12 nm, 14 nm, 15 nm and 16 nm. The article reports a parametrical study extending from 10 to 60 °C in temperature, from 75 to 1031 kHz in frequency, and from 2 to 24 kA m(-1) in magnetic field strength. It was observed that SAR values of smaller NPs decrease with temperature whereas for the larger sample (16 nm) SAR values increase with temperature. The measured variation of SAR with temperature is frequency dependent. This behaviour is fully explained within the scope of linear response theory based on Néel and Brown relaxation processes, using independent magnetic measurements of the specific magnetization and the magnetic anisotropy constant. A good quantitative agreement between experimental values and theoretical values is confirmed in a tri-dimensional space that uses as coordinates the field strength, the frequency and the temperature.

Measurement of specific absorption rate (SAR) of magnetic nanoparticles is crucial to assert their potential for magnetic hyperthermia. To perform this task, calorimetric methods are widely used. However, those methods are not very accurate and are difficult to standardize. In this paper, we present AC magnetometry results performed with a lab-made magnetometer that is able to obtain dynamic hysteresis-loops in the AC magnetic field frequency range from 50 kHz to 1 MHz and intensities up to 24 kA.m-1. In this work, SAR values of maghemite nanoparticles dispersed in water are measured by AC magnetometry. The so obtained values are compared with the SAR measured by calorimetric methods. Both measurements, respectively by calorimetry and magnetometry, are in good agreement. Therefore, the presented AC magnetometer is a suitable way to obtain SAR values of magnetic nanoparticles.