No abstract

No abstract

Room-temperature ionic liquids (ILs) have been used as external lubricants in polystyrene (PS) and polyamide 6 (PA6)-steel contacts and as internal lubricants in new polymer-IL dispersions. 1)C n H 2n+1 )3)CH 3 -imidazolium X ) [X=BF 4 ; n=2 (IL1), 6 (IL2), 8 (IL3). X=PF 6 ; n=6 (IL4). X=CF 3 SO 3 ; n=2 (IL5). X=(4)CH 3 C 6 H 4 SO 3 ); n=2 (IL6)] ionic liquids give low friction and extremely mild wear in PS/AISI 316L stainless steel contacts, independently of IL composition. For AISI 52100 steel pins a tribocorrosion reaction produces FeF 2 and increases friction. PS+IL1 (1; 1.35; 3 wt.% IL1) dispersions show lower dry friction and wear against AISI 52100 as IL1 proportion increases, but the lowest friction, with a one order of magnitude reduction with respect to PS, is reached for PS+1%IL1 once the skin layer has been worn out. Increasing IL1 content to 10 wt.% produces an heterogeneous material with non-uniform IL distribution. IL4 reduces friction and wear in PA6+3%IL4 dispersions against AISI 316L, although the lowest values are obtained with IL4 as external lubricant. The cryofracture surfaces of the polymers have been examined and the thermal stability of the polymers in the presence of ILs has been determined.

No abstract

No abstract

No abstract

Two decades ago, the literature dealing with the possible applications of low molar mass liquid crystals, also called monomer liquid crystals (MLCs), only included about 50 references. Today, thousands of papers, conference reports, books or book chapters and patents refer to the study and applications of MLCs as lubricants and lubricant additives and efforts are made to develop new commercial applications. The development of more efficient lubricants is of paramount technological and economic relevance as it is estimated that half the energy consumption is dissipated as friction. MLCs have shown their ability to form ordered boundary layers with good load-carrying capacity and to lower the friction coefficients, wear rates and contact temperature of sliding surfaces, thus contributing to increase the components service life and to save energy. This review includes the use of MLCs in lubrication, and dispersions of MLCs in conventional polymers (PDMLCs). Finally, new lubricating system composed of MLC blends with surfactants, ionic liquids or nanophases are considered.

No abstract