Phase-Change Memory (PCM) technology has received substantial attention recently. Because PCM is byte-addressable and exhibits access times in the nanosecond range, it can be used in main memory designs. In fact, PCM has higher density and lower idle power consumption than DRAM. Unfortunately, PCM is also slower than DRAM and has limited endurance. For these reasons, researchers have proposed memory systems that combine a small amount of DRAM and a large amount of PCM. In this paper, we propose a new hybrid design that features a hardware-driven page placement policy. The policy relies on the memory controller (MC) to monitor access patterns, migrate pages between DRAM and PCM, and translate the memory addresses coming from the cores. Periodically, the operating system updates its page mappings based on the translation information used by the MC. Detailed simulations of 27 workloads show that our system is more robust and exhibits lower energy-delay 2 than state-of-the-art hybrid systems.

Energy efficiency and energy-proportional computing have become a central focus in enterprise server architecture. As thermal and electrical constraints limit system power, and datacenter operators become more conscious of energy costs, energy efficiency becomes important across the whole system. There are many proposals to scale energy at the datacenter and server level. However, one significant component of server power, the memory system, remains largely unaddressed. We propose memory dynamic voltage/frequency scaling (DVFS) to address this problem, and evaluate a simple algorithm in a real system.As we show, in a typical server platform, memory consumes 19% of system power on average while running SPEC CPU2006 workloads. While increasing core counts demand more bandwidth and drive the memory frequency upward, many workloads require much less than peak bandwidth. These workloads suffer minimal performance impact when memory frequency is reduced. When frequency reduces, voltage can be reduced as well. We demonstrate a large opportunity for memory power reduction with a simple control algorithm that adjusts memory voltage and frequency based on memory bandwidth utilization.We evaluate memory DVFS in a real system, emulating reduced memory frequency by altering timing registers and using an analytical model to compute power reduction. With an average of 0.17% slowdown, we show 10.4% average (20.5% max) memory power reduction, yielding 2.4% average (5.2% max) whole-system energy improvement.

The widespread use of multicore processors has dramatically increased the demand on high memory bandwidth and large memory capacity. As

No abstract

The drive for higher performance and energy efficiency in data-centers has influenced trends toward increased power and cooling requirements in the facilities. Since enterprise servers rarely operate at their peak capacity, efficient power capping is deemed as a critical component of modern enterprise computing environments. In this paper we propose a new power measurement and power limiting architecture for main memory. Specifically, we describe a new approach for measuring memory power and demonstrate its applicability to a novel power limiting algorithm. We implement and evaluate our approach in the modern servers and show that we achieve up to 40% lower performance impact when compared to the stateof-art baseline across the power limiting range.