Vascular tissue engineering is a relevant research field aimed at elaborating and proposing innovative solutions to overcome the drawbacks related to the use of conventional blood vessel substitutes, especially referring to small-diameter grafts. For this aim, electrospinning can be regarded as a valuable technique to produce novel scaffolds with several functional characteristics that can be usefully tailored for the application discussed here. The reproduction of the natural extracellular matrix obtained by processing bioresorbable polymers, either functionalized or not, is driving the biomedical research towards technical solutions that can lead to an actual therapeutic improvement. In this context, this paper reviews those studies focused on the selection of suitable biomaterials for vascular applications, their microstructure, the cell response to polymeric fibres and the strategies considered so far to modify and therefore enhance the performance of final electrospun scaffolds.
Thrombosis is the main cause of failure of small-diameter synthetic vascular grafts when used for by-pass procedures. The development of bioresorbable vascular scaffolds with localized and sustained intra-luminal antithrombotic drug release could be considered a desirable improvement towards a valuable solution for this relevant clinical need. For this aim, we present the fabrication and characterization of aspirin-loaded electrospun poly(ε-caprolactone) tubular scaffolds as a vascular drug-delivery graft. Three different drug concentrations were considered (i.e., 1, 5 or 10 % w/w). Although a fibrous structure was clearly observed for all the collected scaffolds, aspirin content was directly implied in the final microstructure leading to a bimodal fiber diameter distribution and fused fibers at crossing-points (5 or 10 % w/w). Mechanical response highlighted a direct relationship for modulus and stress at break with the aspirin content, while the elongation at break was not remarkably different for the investigated cases. The temporal drug release was strongly dependent from the amount of loaded aspirin, reaching a steady state release after about 50 h. Finally, the adhesion assay confirmed the capability of the electrospun scaffolds to reduce platelet adhesion/aggregation onto aspirin loaded polymeric fibers. Aspirin-loaded electrospun tubular scaffold could represent a feasible candidate to develop a novel bioresorbable drug-releasing graft for small-diameter vessel replacements.
Tissue engineering can effectively contribute to the development of novel vascular prostheses aimed to overcome the well-known drawbacks of small-diameter grafts. To date, poly(ε-caprolactone) (PCL), a bioresorbable synthetic poly(α-hydroxyester), is considered one of the most promising materials for vascular tissue engineering. In this work, the potential advantage of intimate blending soft PCL and hard poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV), a polymer of microbial origin, has been evaluated. Nonwoven mats and small-diameter tubular scaffolds of PCL, PHBV, and PCL/PHBV were fabricated by means of electrospinning technique. Mechanical properties and suture retention strength were investigated according to the international standard for cardiovascular implants. Biological tests demonstrated that both PCL-based scaffolds supported survival and growth of rat cerebral endothelial cells in a short time. The fiber alignment of the electrospun tubular scaffolds contributed to a more rapid and homogeneous cell colonization of the luminal surface.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.