Rockfall is a phenomenon which, when uncontrolled, may cause extensive material damage and personal injury. One of the structures used to avoid accidents caused by debris flows or rockfalls is flexible barriers. The energy dissipating devices which absorb the energy generated by rock impact and reduce the mechanical stresses in the rest of the elements of the structure are an essential part of these kinds of structures. This document proposes an overview of the performance of energy dissipating devices, as well as of the role that they fulfil in the barrier. Furthermore, a compilation and a description of the dissipating elements found in literature are proposed. Additionally, an analysis has been performed of the aspects taken into account in the design, such as experimental (quasi-static and dynamic) tests observing the variation of the behaviour curve depending on the test speed and numerical simulations by means of several finite element software packages.
A technique is presented for the optimized design of oscillators and frequency dividers based on nonlinear transmission lines (NLTLs). The oscillator design relies on a closed-loop configuration containing a high-efficiency amplifier, with the loop output matched to a short NLTL. Attention is paid to the oscillator phase noise. A simple and general-application method is presented for an accurate calculation of the phase sensitivity functions with respect to specific noise sources. The predictions obtained when considering stationary and cyclo-stationary noise-source models are compared. The influence of crucial design parameters on the oscillator efficiency, pulse amplitude, and duty cycle is analyzed, as well as their impact on the phase-noise behavior. An efficient simulation technique enables the evaluation of the injection-locking capabilities during this global optimization of the oscillator in the free-running regime. The phase-noise spectrum in injection-locked conditions is analyzed in detail, considering the influence of flicker noise. A frequency division by 2 is observed in the amplifier stage loaded by the NLTL. The origin of this division is investigated, as well as the influence of the number of cells on the pulsed waveform and the division bandwidth. The techniques have been successfully applied to the design of a pulsed oscillator at 900 MHz.
This paper illustrates the experimental test procedure and results of two flexible barriers of low and medium energy, the so-called IBT-150 and IBT-500. For this purpose, ETAG 027 European Guideline is used. All the requirements for the tests performance are followed and the two energylevel tests performance requirements have been fulfilled in both rockfall barriers. Numerical modeling helps to understand and predict the behavior of these barriers with different configurations drastically reducing the costs of performing real tests. The results of the real test on IBT-150 and IBT-500 have been taken as references to validate two numerical models using Abaqus Explicit software. Afterwards, a presentation of some alternatives of the barrier IBT-150 are stated, which allow a more economical design removing some components that do not affect the energy level of 150 kJ set by the manufacturer. Also, a parametrical analysis of the IBT-500 numerical model has been performed varying the geometrical characteristics, such as the net grid dimension, the diameter of the perimeter cable, the length of the functional modules and its height. The aim of this analysis is the enhancement of maximum energy capacity of the barrier related with the amount of material used to build it. Following the ETAG recommendation, the maximum energy level (MEL) test is achieved if the barrier is able to retain the block. Thus, the MEL level for each numerical model was determined by increasing the initial speed of the block until it trespasses the barrier.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.