Highly robust ion gels, termed double-network (DN) ion gels, composed of inorganic/organic interpenetrating networks and a large amount of ionic liquids (ILs), are fabricated. The DN ion gels with an 80 wt% IL content show extraordinarily high mechanical strength: more than 28 MPa of compressive fracture stress. In the DN ion gel preparation, a brittle inorganic network of physically bonded silica nanoparticles and a ductile organic network of polydimethylacrylamide (PDMAAm) are formed in the IL. Because of the different reaction mechanisms of the inorganic/organic networks, the DN ion gels can be formed by an easy and free-shapeable one-pot synthesis. They can be prepared in a controllable manner by manipulating the formation order of the inorganic and organic networks via not only multistep but also single-step processes. When silica particles form a network prior to the PDMAAm network formation, DN ion gels can be prepared. The brittle silica particle network in the DN ion gel, serving as sacrificial bonds, easily ruptures under loading to dissipate energy, while the ductile PDMAAm network maintains the shape of the material by the rubber elasticity. Given the reversible physical bonding between the silica particles, the DN ion gels exhibit a significant degree of self-recovery by annealing.

No abstract

Supported liquid membranes incorporating amino acid ionic liquids remarkably facilitate CO(2) permeation under dry and low humid conditions.

A tough and thin double-network gel membrane containing amino acid ionic liquids as a CO2 carrier exhibited superior CO2 permeability and stability under pressurized conditions.

Tough inorganic/organic composite network gels consisting of a partially developed silica-particle network and a large amount of an ionic liquid, named micro-double-network (μ-DN) ion gel, are fabricated via two methods. One is a one-pot/one-step process conducted using a simultaneous network formation via sol-gel reaction of tetraethyl orthosilicate and free radical polymerization of N, N-dimethylacrylamide in an ionic liquid. When the network formation rates of the inorganic and organic networks are almost the same, the μ-DN structure is formed. The second method is simpler and involved the use of silica nanoparticles as the starting material. By controlling the dispersion state of the silica nanoparticles in an ionic liquid, the μ-DN structure is formed. In both μ-DN ion gels, silica nanoparticles partially aggregate and form network-like clusters. When a large deformation is induced in the μ-DN ion gels, the silica-particle clusters rupture and dissipate the loaded energy. The fracture stress and Young's modulus of the μ-DN ion gel increase as the size of the silica nanoparticles decreases. The increment in the mechanical strength would have been caused by the increase in the total van der Waals attraction forces and the total number of hydrogen bonding in the silica-particle networks.