The translation of biological synapses onto a hardware platform is an important step toward the realization of brain‐inspired electronics. However, to mimic biological synapses, devices till‑date continue to rely on the need for simultaneously altering the polarity of an applied electric field or the output of these devices is photonic instead of an electrical synapse. As the next big step toward practical realization of optogenetics inspired circuits that exhibit fidelity and flexibility of biological synapses, optically‑stimulated synaptic devices without a need to apply polarity‑altering electric field are needed. Utilizing a unique photoresponse in black phosphorus (BP), here reported is an all‑optical pathway to emulate excitatory and inhibitory action potentials by exploiting oxidation‑related defects. These optical synapses are capable of imitating key neural functions such as psychological learning and forgetting, spatiotemporally correlated dynamic logic and Hebbian spike‑time dependent plasticity. These functionalities are also demonstrated on a flexible platform suitable for wearable electronics. Such low‐power consuming devices are highly attractive for deployment in neuromorphic architectures. The manifestation of cognition and spatiotemporal processing solely through optical stimuli provides an incredibly simple and powerful platform to emulate sophisticated neural functionalities such as associative sensory data processing and decision making.

Imprinting vision as memory is a core attribute of human cognitive learning. Fundamental to artificial intelligence systems are bioinspired neuromorphic vision components for the visible and invisible segments of the electromagnetic spectrum. Realization of a single imaging unit with a combination of in‐built memory and signal processing capability is imperative to deploy efficient brain‐like vision systems. However, the lack of a platform that can be fully controlled by light without the need to apply alternating polarity electric signals has hampered this technological advance. Here, a neuromorphic imaging element based on a fully light‐modulated 2D semiconductor in a simple reconfigurable phototransistor structure is presented. This standalone device exhibits inherent characteristics that enable neuromorphic image pre‐processing and recognition. Fundamentally, the unique photoresponse induced by oxidation‐related defects in 2D black phosphorus (BP) is exploited to achieve visual memory, wavelength‐selective multibit programming, and erasing functions, which allow in‐pixel image pre‐processing. Furthermore, all‐optically driven neuromorphic computation is demonstrated by machine learning to classify numbers and recognize images with an accuracy of over 90%. The devices provide a promising approach toward neurorobotics, human–machine interaction technologies, and scalable bionic systems with visual data storage/buffering and processing.

Layered black phosphorous has recently emerged as a promising candidate for next generation nanoelectronic devices. However, the rapid ambient degradation of mechanically exfoliated black phosphorous poses challenges in its practical implementation in scalable devices. As photo-oxidation has been identified as the main cause of degradation, to-date, the strategies employed to protect black phosphorous have relied upon preventing its exposure to atmospheric oxygen. These strategies inhibit access to the material limiting its use. An understanding of the effect of individual wavelengths of the light spectrum can lead to alternatives that do not require the complete isolation of black phosphorous from ambient environment. Here, we determine the influence of discrete wavelengths ranging from ultraviolet to infrared on the degradation of black phosphorous. It is shown that the ultraviolet component of the spectrum is primarily responsible for the deterioration of black phosphorous in ambient conditions. Based on these results, new insights into the degradation mechanism have been generated which will enable the handling and operating of black phosphorous in standard fabrication laboratory environments.

Additive manufacturing using selective laser melted titanium (SLM-Ti) is used to create bespoke items across many diverse fields such as medicine, defense, and aerospace. Despite great progress in orthopedic implant applications, such as for "just in time" implants, significant challenges remain with regards to material osseointegration and the susceptibility to bacterial colonization on the implant. Here, we show that polycrystalline diamond coatings on these titanium samples can enhance biological scaffold interaction improving medical implant applicability. The highly conformable coating exhibited excellent bonding to the substrate. Relative to uncoated SLM-Ti, the diamond coated samples showed enhanced mammalian cell growth, enriched apatite deposition, and reduced microbial S. aureus activity. These results open new opportunities for novel coatings on SLM-Ti devices in general and especially show promise for improved biomedical implants.

Additively manufactured selective laser melted titanium (SLM-Ti) opens the possibility of tailored medical implants for patients. Despite orthopedic implant advancements, significant problems remain with regard to suboptimal osseointegration at the interface between the implant and the surrounding tissue. Here, we show that applying a nanodiamond (ND) coating onto SLM-Ti scaffolds provides an improved surface for mammalian cell growth while inhibiting colonization of Staphylococcus aureus bacteria. Owing to the simplicity of our methodology, the approach is suitable for coating SLM-Ti geometries. The ND coating achieved 32 and 29% increases in cell density of human dermal fibroblasts and osteoblasts, respectively, after 3 days of incubation compared with the uncoated SLM-Ti substratum. This increase in cell density complements an 88% reduction in S. aureus detected on the ND-coated SLM-Ti substrata. This study paves a way to create facile antifouling SLM-Ti structures for biomedical implants.

With no requirements for lattice matching, van der Waals (vdW) ferromagnetic materials are rapidly establishing themselves as effective building blocks for next-generation spintronic devices. We report a hitherto rarely seen antisymmetric magnetoresistance (MR) effect in vdW heterostructured Fe3GeTe2 (FGT)/graphite/FGT devices. Unlike conventional giant MR (GMR), which is characterized by two resistance states, the MR in these vdW heterostructures features distinct high-, intermediate-, and low-resistance states. This unique characteristic is suggestive of underlying physical mechanisms that differ from those observed before. After theoretical calculations, the three-resistance behavior was attributed to a spin momentum locking induced spin-polarized current at the graphite/FGT interface. Our work reveals that ferromagnetic heterostructures assembled from vdW materials can exhibit substantially different properties to those exhibited by similar heterostructures grown in vacuum. Hence, it highlights the potential for new physics and new spintronic applications to be discovered using vdW heterostructures.

Oxygen vacancies in inorganic semiconductors play an important role in reducing electron-hole recombination, which may have important implications in photocatalysis. Cuprous oxide (Cu2O), a visible light active p-type semiconductor, is a promising photocatalyst. However, the synthesis of photostable Cu2O enriched with oxygen defects remains a challenge. We report a simple method for the gram-scale synthesis of highly photostable Cu2O nanoparticles by the hydrolysis of a Cu(i)-triethylamine [Cu(i)-TEA] complex at low temperature. The oxygen vacancies in these Cu2O nanoparticles led to a significant increase in the lifetimes of photogenerated charge carriers upon excitation with visible light. This, in combination with a suitable energy band structure, allowed Cu2O nanoparticles to exhibit outstanding photoactivity in visible light through the generation of electron-mediated hydroxyl (OH˙) radicals. This study highlights the significance of oxygen defects in enhancing the photocatalytic performance of promising semiconductor photocatalysts.

Gd-based nanomaterials offer interesting magnetic properties and have been heavily investigated for magnetic resonance imaging. The applicability of these materials beyond biomedical imaging remains limited. The current study explores the applicability of these rare-earth nanomaterials as nanozyme-mediated catalysts for colorimetric sensing of l-cysteine, an amino acid of high biomedical relevance. We show a facile solution-based strategy to synthesize two Gd-based nanomaterials viz. Gd(OH) and GdO nanorods. We further establish the catalytic peroxidase-mimic nanozyme activity of these Gd(OH) and GdO nanorods. This catalytic activity was suppressed specifically in the presence of l-cysteine that allowed us to develop a colorimetric sensor to detect this biologically relevant molecule among various other contaminants. This suppression, which could either be caused due to catalyst poisoning or enzyme inhibition, prompted extensive investigation of the kinetics of this catalytic inhibition in the presence of cysteine. This revealed a competitive inhibition process, a mechanism akin to those observed in natural enzymes, bringing nanozymes a step closer to the biological systems.