Resumoà dentina após o condicionamento ácido, exceto o grupo controle (GC) que não recebeu o TP. Para os testes realizados no presente avaliar a RU e a NI, foram confeccionados palitos de 1,0 mm², armazenados em dois tempos de estocagem: água destilada por 24h variância de dois fatores e teste de Tukey HSD para contraste entre as médias (a0.05). Após EBC, os PT com os IP, em todos os grupos, demonstraram redução da NI, comparados ao GC (p < 0.05). O resultado de RU foi: GCCB < GCSB GDCLXCB GDCLXSB Palavras-chave:Apoio: Capes
A finalidade trabalho foi avaliar a influência de diferentes inibidores de proteases (IP) na avaliação dos seguintes fatores ângulo de contato (AC), associado ao sistema adesivo Adper Single Bond 2 (SB), bem como a análise da superfície dentinária (ASD) e a influência de sua atividade antimicrobiana. Soluções de (Diacetato de Clorexidina DCLX, 1,10-Fenantrolina FEN, E-64 e epigalocatequina-3-galato EGCG) foram utilizadas como tratamento prévio (TP) à dentina após o condicionamento ácido, exceto o grupo controle (GC) que não recebeu o TP. Para os testes realizados no presente estudo foi utilizado um total de 60 terceiros molares humanos hígidos recém extraídos. Nos testes de ASD e AC foram confeccionados discos de dentina de 1mm de espessura, a ASD foi analisada por Microscopia de Varredura (MEV). O ângulo de contato foi avaliado por goniômetro. Para os testes antimicrobianos, foram confeccionados 30 discos de dentina para tratamento com as soluções dos IP e a indução do BC. A quantificação foi feita através dos ensaios de redução do MTT e dosagem de ácido lático produzido pelo biofilme. Os dados foram analisados através de análise de variância de dois fatores e teste de Tukey HSD para contraste entre as médias (a0.05). O PT com os IP demonstrou maior teor de carbono na ASD e diminuição do AC. A atividade metabólica e a produção de ácido lático pelo biofilme de S. mutans foi estatísticamente inferior nos discos com os IP, comparados ao GC (p < 0.05).Palavras-chave: Inidores. Proteases. Dentina. Biofilme.
CO COMO FERRAMENTA DA GESTÃO DEMOCRÁTICA NA ESCOLA PÚBLICA", de autoria de Claudienne da Cruz Ferreira, a autora refere que a gestão democrática é um dos princípios fundamentais para a educação pública brasileira. É o projeto político pedagógico que tem a função de ser um documento que delimita a identidade da escola. Portanto, o objetivo do capítulo é demonstrar a importância da relação da existência da gestão democrática para sua construção e aplicação na realidade diária da escola por meio do projeto político pedagógico das escolas públicas brasileiras. Já no capítulo 2 denominado "NÚCLEOS DE PESQUISAS DA ESCO-LA 29 DE OUTUBRO: EDUCAÇÃO DO CAMPO E SAÚDE EM DEBATE", o autor Munir Lauer aborda o caminho histórico acerca da estruturação dos Núcleos de Base -os Núcleos de Pesquisas, reforçando que essa organização em Núcleos não surge dentro da escola, e sim, no período de acampamento da Fazenda Annoni (e anterior a ocupação, ainda na fase preparatória à mesma). Ele ressalta que os núcleos foram transferidos do espaço/momento do acampamento para o espaço/tempo da escola. Na sequência, no capítulo 3, chamado "O PROFISSIONAL EM TÉCNI-CO EM LOGÍSTICA COMO MULTIPLICADOR EM EDUCAÇÃO PARA O TRÂNSITO", de autoria de Marcos Antonio Motta, o autor apresenta a experiência no Laboratório de Currículo do Centro Paula Souza, autarquia do Governo do Estado de São Paulo, vinculada à Secretaria de Desenvolvimento Econômico, a instituição administra as Escolas Técnicas e Faculdades de Tecnologia, ofertando cursos técnicos de nível médio e tecnológico. O curso técnico em Logística é oferecido nas modalidades: Integrado ao Ensino Médio (4360 horas), Ensino Médio com Habilitação Profissional (3520 horas) e Qualificação profissional técnica de nível médio (1200 horas), busca construir o currículo alinhado ao mercado de trabalho, desenvolvendo, implementando e avaliando os currículos pertinentes a Educação Profissional Técnica de Nível Médio. Com o tema das "NARRATIVAS DE FORMAÇÃO DE UMA PEDA-GOGA E A ESCRITA DE SI: UMA CONVERSA ENTRE NÓS", o capítulo 4, a autora Elaine Michele dos Santos da Silva apresenta a tessitura da sua trajetória pessoal, acadêmica, vivências e aprendizagens que se entrelaçam com outras histórias. Reforça que neste artigo apresenta uma perspectiva do olhar para as memórias que narram a história da formação e articula ainda neste compósito reflexões desencadeadas em um processo formativo de professores e suas memórias de alfabetização. A saúde e a cidadania são os temas do capítulo 5, chamado "SAÚDE E CI-DADANIA: RELATO DE EXPERIÊNCIA", de autoria de Ruben Walter Branas Coelho e Anelise Schell Almeida. Os autores nos apresentam a experiência da realização da Feira de Saúde e Cidadania no Bairro São Lucas, comunidade periféricas e de maior vulnerabilidade social, como uma ação interdisciplinar e interinstitucional. O objetivo principal da Feira de Saúde e Cidadania foi oferecer ações de educação em saúde e cidadania, sensibilizando todo público-alvo quanto a promoção da saúde, a prevenção de agravos e a formação c...
O objetivo deste estudo foi avaliar a influência de diferentes tempos de aplicação de plasma não térmico de argônio (PNTA) na energia de superfície e na resistência de união entre um cimento resinoso autoadesivo e uma cerâmica Y-TZP. Blocos sinterizados da cerâmica Y-TZP foram divididos em dois grupos: S (sinterizado) e J (jateamento com Al2O3 de 50 μm). Em seguida, os blocos foram subdivididos em quatro grupos (n5) de acordo com o tempo (s) de aplicação de PNTA: 0, 20, 60 e 120. A energia de superfície foi avaliada através de goniometria. Blocos de compósito foram cimentados nas superfícies de cerâmica com um cimento resinoso autoadesivo. Após armazenagem em água destilada a 37 °C / 24 h, os blocos de compósito-cerâmica foram cortados em palitos e submetidos a teste de microtração (50 N / 1,0 mm/min). Os dados foram submetidos a análise de variância de dois fatores e ao teste de Tukey HSD (a0.05). Nos dois grupos (S e J), a aplicação de PNTA aumentou a energia de superfície, sem diferença significante entre os tempos: 0 s < 20 s 60 s 120 s. Para os dois grupos (S e J), o resultado de resistência de união foi: 0 s < 20 s < 60 s 120 s, (p< 0.05). Somente após 120 s de PNTA, a resistência de união do grupo J (44,2 ± 7,8 MPa) foi estatisticamente superior a do S (31,0± 2,2 MPa), (p < 0.05). Houve correlação positiva entre a resistência de união e o tempo de deposição de PNTA (r 0.80 p 0.0247). A deposição de PNTA aumentou a energia de superfície da cerâmica Y-TZP e a resistência de união entre esta e o cimento resinoso autoadesivo, sendo este efeito maior após maiores tempos de aplicação de PNTA.Palavras-chave: Cerâmica Y-TZP. Plasma não Térmico de Argônio. Resistência de União.
O objetivo deste trabalho foi avaliar o grau de conversão (GC), absorção (WS), solubilidade (SO), resistência de união à dentina (µSBS) e nanoinfiltração (AG%) de um sistema adesivo [Adper Single Bond 2 (ASB2)] contendo inibidores de metaloproteinases [GM1489 (GM), Batimastat (BAT) e diacetato de clorexidina (CHX)] em duas profundidades dentinárias [superficial (DS) e profunda(DP)] após estocagem (imediata e 12 meses). ASB2 sem inibidor (SI) foi usado como controle. WS e SO foram calculadas com base na ISO4049. Para µSBS, 64 molares humanos (HUAP-1.972.896) foram cortados em discos com duas superfícies planas (DS e DP) e distribuídos em 8 grupos. Restaurações foram construídas nas superfícies dos discos e a μSBS foi avaliada. Para AG%, 16 molares humanos foram restaurados, cortados em palitos e preparados para análise em MEV. Os dados foram submetidos a ANOVA e teste Tukey. CHX apresentou o menor GC (84,32%), a menor WS (77,19 μg/mm3) e a maior SO (10,81 μg/mm3). A µSBS imediata variou de 24,86 a 34,06 MPa em DS e de 19,67 a 29,50MPa em DP. GM obteve a maior µSBS em DS, diferente apenas de CHX. BAT e GM apresentaram maiores μSBS em DP e foram diferentes de CHX. Após 12 meses em DS, GM e BAT obtiveram maiores μSBS que SI e CHX. Em DP após 12 meses, GM obteve a maior μSBS, diferente de SI e CHX. SI em DP e DS e CHX em DP não mantiveram a estabilidade de união dentina-resina após estocagem. Após 12 meses BAT e GM reduziram AG% em DS, enquanto apenas GM diminuiu AG% em DP. A incorporação de Batimastat e GM1489 no ASB2 manteve a estabilidade de união resina-dentina após 12 meses, sem prejudicar a WS, SO e GC.Palavras-chave: Adesivos. Metaloproteases. Dentina.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
customersupport@researchsolutions.com
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.