Compressor at PT. Es Muda Perkasa that commonly failure is at unit D. So that need to optimize the compressor at unit D with finding the failure of the parts of the compressor and making the schedule of maintenance program to minimize the failure of the ice machine. This study using Reliability Centered Maintenance (RCM) method, which applicate Grey FMEA to determine the priority of the machine maintenance. After conducting and implementing the RCM method, it was found that the failure occurs at Low-Pressure and High-Pressure Pump at compressor unit D, and sub-part failure happen on bearing, due to small coefficient, which is 0.566 where it become primarily failure component. For the next maintenance, using schedule on condition task on bearing parts of the machine could minimize the failure of the parts on the machine
Cuka merupakan hasil olah makanan dari proses fermentasi glukosa dengan menggunakan Sacharomyces cervisiae menghasilkan etanol. Fermentasi etanol secara aerob dengan menggunakan bakteri Acetobacter aceti menghasilkan asam cuka. Metode yang digunakan dalam penelitian ini adalah fermentasi, kemurnian cuka dianalisis dengan menggunakan GC-MS. Hasil yang didapatkan pembentukan asam cuku terbaik terbentuk pada minggu ke-3 hingga ke-4 dengan pH 3,5, dengan puncak kromatogram pada waktu retensi 8,473. Penelitian ini diharapkan dapat dijadikan upaya pemberdayaan dalam meminalisir volume limbah dengan mengolah menjadi produk yang ekonomis
The process of final project research consultations is now often done by making a schedule to meet with supervisors within the time set by students and supervisors. It is known that the consultation process by the way it is done now still has problems from the effectiveness of student research time and the distance between the research center and the location of the supervisor. With these problems resulted in students not being timely in conducting research consultations with their supervisors. Therefore, a system is needed that can provide a system of research consultations remotely using internet facilities that are integrated with the consultation notification system via the SMS Gateway. The methodology is built using the phases of context diagrams, data flow diagrams and entity relationships. The system is built using PHP programming, mySQL database and Gammu. The results of the final project consultation information system research integrated with the notification system using the SMS Gateway have produced several tables and forms, namely student forms, lecturer forms, consultation forms and document forms. The form has been able to provide a remote consultation system using web media and has been able to provide notification notifications to students and lecturers regarding the consultation status using the SMS gateway service. It is expected that this information system can facilitate students and lecturers in conducting more effective and efficient consultations.
<p>The study aims to describe the plastic waste management from a processing perspective that has economic value added. Conversion of waste into an economic value, is one practice that can be a role of model, so that it can guide a certain region to do good and correct waste of management. The potential of Aceh’s plastic waste is relatively large, which must be considered by the regional government to be able to realize related to plastic waste processing ctivities by the processor, where the existence is a large potential to be used as an opportunity for recycle. The current practice is still a little and only processing the plastic waste to become plastic chips, and there is no plastic waste processing converted into processed plastic products. The existence of this processing can provide conomic Added value for its owners and provide benefits to local governments as well. Therefore, it is need the role of he Aceh government to bring up the spirit of entrepreneurship, especially in the management and processing of lastic waste. On the other hand, a spirit of togetherness is needed through coordination and cooperation between local governments and non-governmental institutions, activists and environmentalists to carry out the mandate of the law relating to environmental conservation including waste management activities that can be added to conomic value.</p>
This study aims to analyze legal protection in the making of a separation property agreement in marriages between Indonesian citizen and foreign citizen and to analyze the authority of a notary in the making of a separation property agreement in marriages between Keywords: Agreement, Property, Citizen, Marriage AbstrakPenelitian ini bertujuan untuk menganalisis perlindungan hukum dalam pembuatan perjanjian pemisahan harta dalam perkawinan warga negara indonesia dengan warga negara asing dan untuk menganalisis kewenangan notaris terhadap pembuatan perjanjian pemisahan harta dalam perkawinan warga negara indonesia dengan warga negara asing. Penelitian ini menggunakan jenis penelitian normatif empiris. Adapun metode pendekatan yang digunakan adalah pendekatan perundang-undangan, pendekatan konseptual dan pendekatan kasus. Berdasarkan hasil penelitian, maka dapat disimpulkan bahwa pembuatan perjanjian kawin dapat memberikan perlindungan hukum bagi para pihak yang membuatnya. Akta perjanjian yang dibuat di Notaris dapat dijadikan sebagai alat bukti tertulis di pengadilan jika di kemudian hari terjadi permasalahan. Berdasarkan Pasal 1868 KUHPerdata dan Kewenangan notaris dalam Pasal 15 UUJN menyebutkan notaris berwenang membuat akta autentik terkait segala perjanjian. Notaris harus mampu memberikan Kepastian hukum di dalam kehidupan masyarakat karena di dalam akta tersebut adanya alat bukti yang menentukan dengan jelas hak dan kewajiban seseorang sebagai subyek hukum dalam masyarakat. Akta Notaris sebagai akta yang memiliki kekuatan pembuktian yang sempurna
Abstract. Quality control is activities to be able to improve, maintain and improve the quality of the products produced. Because it controls the quality, it is very important to improve the quality of the products produced. Can improve the quality expected by all elements of the company can be obtained as expected. CV. X is a company established in the city of Bandung in 2003, Jakarta, Bogor and Central Java. The company is engaged in the production of various laboratory equipment such as erlenmayer, test tubes, drip pipettes, measuring flasks and measuring cups. The number of pumpkin production in 2016 was 2218, in 2017 as many as 2429 and in 2018 as many as 2871. Of the total production, the level of defect of pumpkin products measured an increase in 2016 of 3.5%, in 2017 amounted to 4.3% and in 2018 of 5.3%. The level of product defect exceeds the target or determined by the company for smoothness of 2%, it is necessary to improve the quality of product defects in the flask. Fault Tree Analysis (FTA) and Failure Mode and Effect Analysis (FMEA) can be used to analyze and provide solutions to improve the quality of defective products. Based on the processing and analysis of the data obtained on the type of defective form is not appropriate is the operator who is not careful with the value of RPN 120, the cause of screen printing defects that consider cleanliness, less careful, dirty work area, the user uses the operator to reverse the setting with the RPN value 144, causing damage back / broken ie operator settings change, less careful and less tidy work station with a value of RPN 240. Abstrak. Pengendalian kualitas merupakan aktivitas-aktivitas untuk dapat menjaga, mempertahankan dan dapat meningkatkan kualitas dari produk yang dihasilkan. Oleh karena hal tersebut pengendalian kualitas memiliki peranan sangat penting dalam terciptanya produk yang berkualitas. Sehingga tujuan yang diharapkan oleh seluruh elemen perusahaan dapat tercapai. CV. X merupakan perusahaan yang didirikan di Kota Bandung pada tahun 2003, berbasis usaha kecil menengah dengan pangsa pasar meliputi wilayah Bandung, Jakarta, Bogor dan Jawa Tengah. Perusahaan ini bergerak dalam produksi berbagai macam alat-alat laboratorium seperti erlenmayer, tabung reaksi, pipet tetes, labu ukur dan gelas ukur. Jumlah produksi labu ukur pada tahun 2016 adalah 2218, pada tahun 2017 sebanyak 2429 dan pada tahun 2018 sebanyak 2871 . Dari jumlah produksi tersebut, tingkat kecacatan produk labu ukur mengalami peningkatan yaitu pada tahun 2016 sebesar 3.5%, tahun 2017 sebesar 4,3% dan tahun 2018 sebesar 5,3%. Tingkat kecacatan produk sudah melewati ambang batas dari yang diharapkan perusahaan sebesar 2 % sehingga diperlukan upaya unuk mengatasi masalah kecacatan produk pada labu ukur . Fault Tree Analysis (FTA) dan Failure Mode and Effect Analysis (FMEA) dapat digunakan untuk menganalisis dan memberikan solusi terhadap perbaikan kualitas produk cacat. Hasil dari data yang telah diolah dan dianalisa, faktor penyebab kecacatan bentuk tidak sesuai yaitu operator kurang hati-hati dengan nilai RPN 120, penyebab cacat sablon yaitu perhatian terhadap kebersihan kurang, kurang hati-hati, stasiun kerja kotor, intensitas penggunaan alat tinggi, kurangnya pengawasan dan operator mengabaikan setting dengan nilai RPN 144, penyebab cacat retak/pecah yaitu operator mengabaikan aturan setting, kurang hati-hati dan stasiun kerja kurang rapi dengan nilai RPN 240.
Digital transactions help customers to get what they require without leaving their homes. This type of transaction is very practical, safe, and efficient. With a cell phone and internet, consumers can find various items they want quickly. On the other hand, it creates a problem for retail businesses that rely more on a direct selling system. It can be said that physical stores are depressed by a change in shopping trends to online shopping. The main objective of this study is to determine the extent of the influence of digital technology on the retail industry, especially in the culinary or food sector, while the specific objectives are determining the use of digital technology, determining the factors that influence digital technology in the retail industry and finding the contribution of digital technology on the retail industry. A quantitative method is used through the distribution of questionnaires to respondents. The results showed that the culinary industry, especially in M-Resto, has implemented a work process through digital technology applications. It also showed that the largest contribution comes from technology statements where 68% of respondents strongly agree that technology affects retail industries. The conclusion is that digital technology affects the retail industry, especially at M-Resto. Keywords: digital technology,retail industry,globalization
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.