Perencanaan Perawatan Mesin Kompresor Pada PT. Es Muda Perkasa Dengan Metode Reliability Centered Maintenance (RCM)

Abstract

Compressor at PT. Es Muda Perkasa that commonly failure is at unit D. So that need to optimize the compressor at unit D with finding the failure of the parts of the compressor and making the schedule of maintenance program to minimize the failure of the ice machine. This study using Reliability Centered Maintenance (RCM) method, which applicate Grey FMEA to determine the priority of the machine maintenance. After conducting and implementing the RCM method, it was found that the failure occurs at Low-Pressure and High-Pressure Pump at compressor unit D, and sub-part failure happen on bearing, due to small coefficient, which is 0.566 where it become primarily failure component. For the next maintenance, using schedule on condition task on bearing parts of the machine could minimize the failure of the parts on the machine

Analisis Perawatan Mesin dengan Menggunakan Metode Reability Centered Maintenance dan Fuzzy Fuzzy Failure Mode and Effect Analysis

“…Kegiatan perawatan mesin mempunyai peranan yang sangat penting dalam mendukung beroperasinya suatu sistem secara lancar sesuai yang dikehendaki (Zein, Mulyati, & Saputra, 2019). Selain itu, kegiatan perawatan juga dapat meminimalkan biaya atau kerugian-kerugian yang ditimbulkan akibat adanya kerusakan mesin.…”

Machine Maintenance Planning Using the Reliability Centered Maintenance (RCM) Method at PT Perkebunan Nusantara XIV Camming Sugar Factory in Bone Regency

“…Maintenance is defined as an activity carried out to maintain and maintain facilities to prevent and reduce or avoid damage from equipment to obtain a satisfactory state of equipment operation as expected. Maintenance can extend the life of equipment facilities and ensure the operational readiness of equipment to ensure its users' safety and security (Zein et al, 2019).…”

“…The damaged production machines are cane cutter, hummer shredder, and mil roll machine. Machine damage includes wear problems on Disc components, Scrapper Plate (wiper plate), Bearing (bearing component), jamming problems on rotor and plate components, improper installation problems on nut and bolt parts, freed handles, and Standard Mill Check (Zein et al, 2019).…”

Perencanaan Sistem Perawatan Mesin Dust Collector Pecs Id Fan Menggunakan Metode Reliability Centered Maintenance

“…Implementasi RCM mampu menentukan komponen kritis pada komponen pompa LP & HP sebagai dasar pembuatan Schedule On Condition Task yang berfungsi sebagai langkah perawatan [9]. RCM membagi kegagalan komponen sistem produksi desalination plant dalam kategori outage problem (79%) dan kategori economic problem (21%) dengan tindakan perawatan Condition Direct, sebesar 66.67% dan Failure Finding 33.33% [10].…”