No abstract

No abstract

This article presents the design and implementation of an 88 × 85 mm reconfigurable filtering bow‐tie antenna with four operating states. Two PIN diodes are deployed to reconfigure the transmission zeros to realize ultra‐wide band (UWB), 3.5/5.5 GHz with independent switching. This switching prevents the interference of the primary user into the secondary user thereby making the filtenna suitable for cognitive radio applications. The proposed filtenna consists of a UWB bow‐tie antenna integrated with a band‐pass filter with reconfigurable property enabled using two PIN diodes. The prototype‐filtering antenna is fabricated and the simulated results are validated using measurements. The presented results show that the antenna exhibits good impedance and radiation characteristics.

With the promising developments in wearable communication technology, attention towards flexible electronics is increasing day-by-day. This study presents flexible low-profile ultra-wideband (UWB) antennas for wearable applications. The antenna comprised of a modified dewdrop-inspired radiator and a defected ground plane and has an impedance bandwidth of 3.1–10.6 GHz. The antenna flexibility is investigated using four different substrates (polyester, polyamide, denim, and Teslin) and tested on a cotton shirt and a high-end Res-Q jacket to evaluate their performance stability for body-worn applications. The fabricated planar dewdrop-shaped radiator (PDSR) antennas have a radiation efficiency of >90%, a gain of >4 dBi, and a group delay variation of fewer than 0.5 ns. The antenna conformability is measured by placing the fabricated antennas on various curved and nonplanar parts of the human body. The aforementioned antennas offer better flexibility for different bent conditions. The specific absorption rate (SAR) of the designed antennas is investigated to determine their wearability, and values are found to be less than 0.2 W/Kg. Also, the received signal strength (RSS) is discussed in order to analyze signal attenuation, and the performance analysis of the antennas is compared.

This paper presents a novel ultra‐wideband rectenna which consists of a transparent Vivaldi antenna and a wideband rectifying circuit for radio frequency energy harvesting. The antenna is realized on a 2.2‐mm‐thick soda‐lime glass substrate coated with fluorine‐doped tin oxide of thickness 650 nm. It provides an optical transmittance greater than 80% in the visible region. The rectifying circuit with a cascaded matching network and the Greinacher doubler circuit are fabricated on an FR4 substrate with a thickness of 0.8 mm. The antenna provides the best matching characteristics and the realized peak gain is 3.2 dBi. The designed matching network enables maximum power transfer from the antenna to the rectifier. The rectenna provides a peak power conversion efficiency of 69% for −10 dBm input power. The proposed antenna can be realized on the windscreen of automobiles and glass windows without causing any obstruction to normal view.

No abstract

No abstract

An Optically transparent UWB antenna with polarization diversity for the use of automotive communications is presented in this paper. The novel two element antenna operates at the frequency range of 2.5-8 GHz with dimension 45×45 mm2 and peak gain 1.2 dBi. Antenna elements are placed orthogonally to achieve polarisation diversity. The proposed antenna is placed on a soda lime glass substrate which has a permittivity of 7.3 and thickness of 2.2 mm. The radiator of the antenna is made of FTO with sheet resistance 6 Ω/sq. The Diversity gain of the proposed antenna is greater than 9.9 and ECC value is lesser than 0.02 for the frequency range of 3-8 GHz. The isolation between the antenna elements is more than 15 dB without any complex decoupling structures between them.