Cassava processing wastewater (CPW) is a highly polluting, liquid residue of cassava processing, usually discarded or treated anaerobically. However, it can serve as a low-cost culture medium for microalgae. After a preliminary evaluation of the growth of 10 microalgal strains in diluted CPW, the microalgae Haematococcus pluvialis SAG 34−1b and Neochloris (Ettlia) oleoabundans UTEX 1185 were selected for cultivation in CPW without a supply of additional nutrients and evaluated for their growth, lipid production, and nutrients removal. Maximal biomass concentrations of 1.79 g·L−1 for H. pluvialis and 3.18 g·L−1 for N. oleoabundans were achieved with 25% CPW medium on the 13th day of growth. The algae H. pluvialis and N. oleoabundans removed 60.80 and 69.16% of the chemical oxygen demand, 51.06 and 58.19% of total nitrate, and 54.68 and 69.84% of phosphate, respectively. On average, lipid productivities reached 0.018 and 0.041 g·L−1 day−1 for H. pluvialis and N. oleoabundans, respectively. Therefore, cultivating these microalgae in diluted CPW is a promising treatment for cassava wastewater with simultaneous valuable biomass production.
Recycling bioresources is the only way to sustainably meet a growing world population’s food and energy needs. One of the ways to do so is by using agro-industry wastewater to cultivate microalgae. While the industrial production of microalgae requires large volumes of water, existing agro-industry processes generate large volumes of wastewater with eutrophicating nutrients and organic carbon that must be removed before recycling the water back into the environment. Coupling these two processes can benefit the flourishing microalgal industry, which requires water, and the agro-industry, which could gain extra revenue by converting a waste stream into a bioproduct. Microalgal biomass can be used to produce energy, nutritional biomass, and specialty products. However, there are challenges to establishing stable and circular processes, from microalgae selection and adaptation to pretreating and reclaiming energy from residues. This review discusses the potential of agro-industry residues for microalgal production, with a particular interest in the composition and the use of important primary (raw) and secondary (digestate) effluents generated in large volumes: sugarcane vinasse, palm oil mill effluent, cassava processing waster, abattoir wastewater, dairy processing wastewater, and aquaculture wastewater. It also overviews recent examples of microalgae production in residues and aspects of process integration and possible products, avoiding xenobiotics and heavy metal recycling. As virtually all agro-industries have boilers emitting CO2 that microalgae can use, and many industries could benefit from anaerobic digestion to reclaim energy from the effluents before microalgal cultivation, the use of gaseous effluents is also discussed in the text.
The antioxidant and food pigment astaxanthin (AX) can be produced by several microorganisms, in auto- or heterotrophic conditions. Regardless of the organism, AX concentrations in culture media are low, typically about 10–40 mg/L. Therefore, large amounts of nutrients and water are necessary to prepare culture media. Using low-cost substrates such as agro-industrial solid and liquid wastes is desirable for cost reduction. This opens up the opportunity of coupling AX production to other existing processes, taking advantage of available residues or co-products in a biorefinery approach. Indeed, the scientific literature shows that many attempts are being made to produce AX from residues. However, this brings challenges regarding raw material variability, process conditions, product titers, and downstream processing. This text overviews nutritional requirements and suitable culture media for producing AX-rich biomass: production and productivity ranges, residue pretreatment, and how the selected microorganism and culture media combinations affect further biomass production and quality. State-of-the-art technology indicates that, while H. pluvialis will remain an important source of AX, X. dendrorhous may be used in novel processes using residues.
Biological contamination is one of the main bottlenecks in the production of microalgae, reducing quality and productivity, sometimes leading to complete loss of the cultures. This work evaluated the presence of bacterial contaminants in N. oleoabundans cultures through HTS and 16S analysis and their susceptibility to 6 natural terpenes (α-pinene, β-pinene, limonene, trans-cinnamaldehyde, linalool, and eugenol). The principal phyla identified were Proteobacteria, Bacteroidetes and Actinobacteria, and based on these data, 89 bacterial isolates of seven genera were obtained (36 Aureimonas sp., 27 Microbacterium sp., 5 Pseudomonas sp., 9 Bacillus sp., 14 Shinella sp., 1 Brevundimonas sp., and 1 Exiguobacterium sp.). The minimal inhibitory concentration of terpenes was 6.25 mg. mL− 1, with a reduction in bacterial counts of most isolates by 79% − 99%. The use of selected terpenes can be a pathway towards eco-friendly contamination control in microalgae cultures.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.