This letter presents a novel strategy for template synthesis of polymer structures with laser machined substrates. User-designed patterns of submicrometer holes with aspect ratios >10:1 and depths >10 μm were produced by focusing 160 fs, 5.2 μJ laser pulses on the surface of fused silica with a high numerical aperture microscope objective. Some holes were enlarged by chemical etching. Polymer solutions were cast into the templates to create high-aspect-ratio polymer structures using replication. Engineered polymer structures prepared by this unique method are useful for a number of applications such as high surface area electrodes and biological substrates.

Microfluidic devices designed for chemotaxis assays were fabricated on fused silica substrates using femtosecond laser micromachining. These devices have built-in chemical concentration gradient forming structures and are ideally suited for establishing passive diffusion gradients over extended periods of time. Multiple gradient forming structures, with identical or distinct gradient forming characteristics, can be integrated into a single device, and migrating cells can be directly observed using an inverted microscope. In this paper, the design, fabrication, and operation of these devices are discussed. Devices with minimal structure sizes ranging from 3 to 7 lm are presented. The use of these devices to investigate the migration of Dictyostelium discoideum cells toward the chemoattractant folic acid is presented as an example of the devices' utility.

No abstract

In this paper we report on the fabrication of regular arrays of silica nanoneedles by deposition of a thin layer of silica on patterned arrays of polymer nanowires (or polymer nanohair). An array of high-aspect-ratio nanoscale diameter holes of depths greater than 10 µm was produced at the surface of a fused silica wafer by an amplified femtosecond laser system operated in single-pulse mode. Cellulose acetate (CA) film was imprinted into the nanoholes and peeled off to form a patterned array of standing CA nanowires, a negative replica of the laser machined nanoholes. The cellulose acetate replica was then coated with silica in a chemical vapor deposition process using silicon tetrachloride vapor at 65 °C. Field emission scanning electron microscopy, focused ion beam sectioning, energy dispersive x-ray analysis and Fourier-transform infrared spectroscopy were used to characterize the silica nanoneedles. Precisely patterned, functionalized arrays of standing silica nanoneedles are useful for a number of applications.

Understanding cellular interactions with culture substrate features is important to advance cell biology and regenerative medicine. When surface topographical features are considerably larger in vertical dimension and are spaced at least one cell dimension apart, the features act as 3D physical barriers that can guide cell adhesion, thereby altering cell behavior. In the present study, we investigated competitive interactions of cells with neighboring cells and matrix using a novel nanoneedle gradient array. A gradient array of nanoholes was patterned at the surface of fused silica by single-pulse femtosecond laser machining. A negative replica of the pattern was extracted by nanoimprinting with a thin film of polymer. Silica was deposited on top of the polymer replica to form silica nanoneedles. NIH 3T3 fibroblasts were cultured on silica nanoneedles and their behavior was studied and compared with those cultured on a flat silica surface. The presence of silica nanoneedles was found to enhance the adhesion of fibroblasts while maintaining cell viability. The anisotropy in the arrangement of silica nanoneedles was found to affect the morphology and spreading of fibroblasts. Additionally, variations in nanoneedle spacing regulated cell-matrix and cell-cell interactions, effectively preventing cell aggregation in areas of tightly-packed nanoneedles. This proof-of-concept study provides a reproducible means for controlling competitive cell adhesion events and offers a novel system whose properties can be manipulated to intimately control cell behavior.

No abstract

The uniquely low friction behavior of near-frictionless carbon (NFC) as compared to conventional diamondlike carbon (DLC) is determined by the bonding within the film. Inelastic neutron scattering (INS) and Fourier transform infrared (FTIR) spectroscopy were used to probe the bonding environment of carbon and hydrogen; both INS and FTIR can probe the whole sample. Previous work has focused on surface studies; the present results show that in the film as a whole the majority of the hydrogen is adjacent to sp3-bonded carbon. In addition this work has determined the absence of any molecular hydrogen in NFC.

Abstract:We report on the preparation of conjugated polymer nanofibers via template-synthesis. A femtosecond laser machined fused silica template, with a micro-patterned array of high-aspect ratio surface nanopores, was first spin-coated with a polyvinyl alcohol (PVA) solution to form a water-soluble release layer. The PVA-lined template was then coated with a conjugated poly(3-hexylselenophene) (P3HS) – solvent solution. The solvent was allowed to dissipate, and the resulting {template / PVA liner / conjugated P3HS film} stack was then submerged in water to dissolve the PVA and release the conjugated polymer film from the template. The resulting conjugated polymer film exhibits an array of micro-patterned polymer nanofibers that constitute a negative replica of the PVA-lined template. The nanofibers come arranged in a vertical architecture that spans over the surface of the supporting film.