The gypsum plaster waste is still faced a serious economic and environmental problem. Considering the high volume and the destination often inadequate. Intending to provide a mitigating alternative, this research intends to develop blocks that incorporate the industrial gypsum plaster waste through reverse logistics. For this, a physic-chemical recycling process of gypsum plaster waste was carried out on an industrial scale and the developed material was characterized in anhydrous and fresh state. Then, blocks were made with the recycled material and characterized according to NBR 16495 (ABNT, 2016). After its characterization, the material was evaluated for its mechanical performance when used in walls, regarding the tests of suspended vertical loads and hard and soft body impact, according to the guidelines included in the performance standard NBR 15575-4 (ABNT, 2013). The walls constituted with the developed material showed satisfactory performance, having, in some cases, presented superior performance in comparison to the conventional walls of gypsum blocks, according to results presented by the Technical Assessments Document - DATEC nº 27 (2015). Finally, small walls of the recycled gypsum block and gypsum glue were elaborated to verify the compressive behavior. Regarding these verifications, it was noticed that the small walls obtained good resistive capacity.
Tendo em vista a importância da sustentabilidade, bastante discutida na atualidade, o presente artigo tem por objetivo analisar a formação dos engenheiros civis de uma Instituição de Ensino Superior - IES de Pernambuco e observar se os conceitos e aplicações das três principais dimensões da sustentabilidade – ambiental, social e econômica – são abordadas em sala de aula, em aplicações práticas e na gestão da própria IES. A IES escolhida para o estudo foi recentemente nomeada como a sexta melhor do nordeste no curso de Engenharia Civil, de acordo com pesquisa da Folha de São Paulo. Para o estudo analisou-se a grade curricular dos cursos de graduação e de pós-graduação em Engenharia Civil sendo elaborados e aplicados questionários específicos, para os professores e os alunos com questões voltadas ao ensino, aprendizagem e prática de conceitos sustentáveis. Após a aplicação dos questionários, as respostas foram compiladas e analisadas de forma a verificar a aplicação dos conceitos de sustentabilidade na formação dos engenheiros, bem como mensurar a importância das dimensões ambiental, econômica e social sob a ótica dos docentes e discentes da IES. Os resultados mostraram que a maioria dos alunos e professores valorizam e afirmam conhecer os conceitos relacionados a aplicação da sustentabilidade na Engenharia Civil, porém nem todos conseguem distinguir as ações da dimensão social aplicada a projetos de construção havendo uma maior valorização das dimensões ambiental e econômica da sustentabilidade.
The construction industry, a major influencer in Brazil’s economic and social development, is responsible for a large consumption of raw materials and waste production. In particular, plaster presents significant growth, especially in the Northeast, due to the region of Araripe, great producer of this construction material. Considering the serious problems caused by the incorrect disposal of plaster in nature, there is the challenge of its recycling process. This research aimed to analyze several percentages of plaster residues to be added to the plaster paste, with and without retarder additive (sodium citrate), in terms of physical, mechanical, and rheological properties, focusing at the production of components. For that, the residue underwent physic-chemical recycling process to be replaced by plaster or by mass, in the percentages of 25%, 50%, 75% and 100%. The study of the performance of the material was done through the tests of granulometry, unit mass, mini-slump method, calorimetry, squeeze-flow method, compressive strength, and surface hardness. The results showed that the recycled plaster (RP) did not excessively damage the studied properties, and it was permissible to substitute up to 50% of RP in the production of the paste for components, following the recommendations of the recycling process and water/plaster ratio.
Editora Direitos para esta edição cedidos à Atena Editora pelos autores. Open access publication by Atena Editora Todo o conteúdo deste livro está licenciado sob uma Licença de Atribuição Creative Commons. Atribuição-Não-Comercial-NãoDerivativos 4.0 Internacional (CC BY-NC-ND 4.0). O conteúdo dos artigos e seus dados em sua forma, correção e confiabilidade são de responsabilidade exclusiva dos autores, inclusive não representam necessariamente a posição oficial da Atena Editora. Permitido o download da obra e o compartilhamento desde que sejam atribuídos créditos aos autores, mas sem a possibilidade de alterála de nenhuma forma ou utilizá-la para fins comerciais.Todos os manuscritos foram previamente submetidos à avaliação cega pelos pares, membros do Conselho Editorial desta Editora, tendo sido aprovados para a publicação com base em critérios de neutralidade e imparcialidade acadêmica.A Atena Editora é comprometida em garantir a integridade editorial em todas as etapas do processo de publicação, evitando plágio, dados ou resultados fraudulentos e impedindo que interesses financeiros comprometam os padrões éticos da publicação. Situações suspeitas de má conduta científica serão investigadas sob o mais alto padrão de rigor acadêmico e ético.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
334 Leonard St
Brooklyn, NY 11211
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.