The microbial fuel cell (MFC) is an innovative technology that was initially designed to harness energy from organic waste using microorganisms. It is striking how many promising applications beyond energy production have been explored in recent decades. In particular, MFC-based biosensors are considered to be the next generation biosensing technology for environmental monitoring. This review describes recent advances in this emerging technology of MFC-based biosensors, with a special emphasis on monitoring of biochemical oxygen demand and toxicity in the environment. The progress confirms that MFC-based biosensors could be used as self-powered portable biosensing devices with great potential in long-term and remote environmental monitoring

A whole-cell bioelectrochemical biosensing system for amperometric detection of riboflavin was developed. A "bioelectrochemical wire" (BW) consisting of riboflavin and cytochrome C between Shewanella oneidensis MR-1 and electrode was characterized. Typically, a strong electrochemical response was observed when riboflavin (VB2) was added to reinforce this BW. Impressively, the electrochemical response of riboflavin with this BW was over 200 times higher than that without bacteria. Uniquely, this electron rewiring process enabled the development of a biosensing system for amperometric detection of riboflavin. Remarkably, this amperometric method showed high sensitivity (LOD = 2.2 nM, S/N = 3), wide linear range (5 nM ∼ 10 μM, 3 orders of magnitude), good selectivity, and high resistance to interferences. Additionally, the developed amperometric method featured good stability and reusability. It was further applied for accurate and reliable determination of riboflavin in real conditions including food, pharmaceutical, and clinical samples without pretreatment. Both the cost-effectiveness and robustness make this whole-cell amperometric system ideal for practical applications. This work demonstrated the power of bioelectrochemical signal amplification with exoelectrogen and also provided a new idea for development of versatile whole-cell amperometric biosensors.

No abstract

No abstract

Improvement of power production in a microbial fuel cell (MFC) with a high cell density culture strategy was developed. By using high cell density culture, the voltage output and power density output of the MFC were enhanced about 0.6 and 1.6 times compared to the control, respectively. Further analysis showed that riboflavin concentration in the MFC was dramatically increased from 0.1 mg/L to 1.2 mg/L by high cell density culture. Moreover, the biofilm formation on the anode surface was significantly enhanced by this new strategy. The increased accumulation of electron shuttle (riboflavin) as well as enhanced biofilm formation contributed to the improvement in anodic electrochemical activity and these factors were the underlying mechanism for MFC performance improvement by high cell density culture. This work demonstrated that high cell density culture would be a simple and practical strategy for MFC manipulation.