No abstract

No abstract

No abstract

The newly developed joining-by-forming technology “shear-clinching”, features a potentially single-stage process for joining UHSS without requiring any additional elements. Foundational studies have focused on the functionality of shear-clinching at a one-element sample. To ensure the safety of the industrial application of the shear-clinching technology, an investigation with component-like samples with several joints is required. This paper presents a detailed analysis of the material behaviour during the shear-clinching process with multi-element specimens to evaluate the influence of the neighbouring joints. In order to describe the influence of the neighbouring joints, the deformations resulting from the bending and material displacement are recorded without contact after the joining process: locally around the joining point and globally over the entire sample size. To minimize such bending effects, a tool-sided adaptation is provided. The results show the high potential of shear-clinching joining by UHSS and give further recommendations for future multi-material application.

was das Fügen artungleicher Werkstoffe mit stark unterschiedlichen mechanischen Eigenschaften ermöglicht. Aus der Kombination der Teilprozesse Schneiden und Fügen ergibt sich eine erhöhte Komplexität. Innerhalb der vorliegenden Arbeit werden daher grundlegende Mechanismen beim Schneidclinchen und deren Wechselwirkung sowie die Robustheit des Prozesses untersucht, um die Anwendbarkeit der Technologie zu verbessern. Schlüsselwörter: Fügen / Schneidclinchen / Multi-Material Design / Werkzeug / Prozessrobustheit 2 3 4 5 6 7 8

No abstract

No abstract

Modern developments in the automotive sector are motivated by the objective of lowering the emission of pollutants. In contrast, growing demands for safety and comfort lead to a potential increase of the weight of vehicles. Thus, the consequent use of lightweight design is indispensable. This includes the use of different materials for the construction of car bodies. Because of various material properties, joining of dissimilar materials is challenging and requires often the application of non-thermic processes like riveting or clinching. These processes are limited by the mechanical properties of the joining partners. Especially the increasing use of ultra-high strength alloys, like the hot stamped steel 22MnB5, makes the development of new joining technologies necessary. One of these innovative technologies is shear-clinching. By combining shear-cutting and clinching in one process, this technology produces durable and tight connections of dissimilar materials with high differences regarding strength and formability. In contrast to shear-cutting the die-sided material has no contact with the punch. Since the process of shear-clinching is a combination of cutting and joining using the same tool, the tool loads differ from common shear-cutting. Especially cutting hot stamped steels is a challenge due to their high ultimate strength which leads to high tool loads. Thus, the analysis of the load condition is essential for the dimensioning of durable and wear resistant tools. Hence, the scope of this paper is a numerical investigation of the tool loads during the indirect cutting process and the subsequent step of joining by forming during shear-clinching. Since an experimental investigation of the occurring tool loads in the closed process is not practicable, the finite element method has to be used. Therefore, a damage-based numerical model is set up to enable the coupled simulation of the combined cutting and joining process and the resulting tool loads. This allows the analysis of the loads during the whole process, identifying the influences of materials and sheet thicknesses.