This work analyses the structure of the different contributions to the image spectrum derived by the three-dimensional Fourier decomposition of sea clutter time series measured by ordinary X-band marine radars. The goal of this investigation is to derive a method to estimate the significant wave height of the ocean wave fields imaged by the radar. The proposed method is an extension of a technique developed for the analysis of ocean wave fields by using synthetic aperture radar systems. The basic idea behind this method is that the significant wave height is linearly dependent on the square root of the signal-to-noise ratio, where the signal is assumed as the radar analysis estimation of the wave spectral energy and the noise is computed as the energy due to the sea surface roughness, which is closely related to the speckle of the radar image. The proposed method to estimate wave heights is validated using data sets of sea clutter images measured by a marine radar and significant wave heights derived from measurements taken by a buoy used as reference sensor.
Abstract:The problem of ground target detection with passive radars is considered. The design of an antenna array based on commercial elements is presented, based on a non-uniform linear array optimized according to sidelobe level requirements. Array processing techniques are applied in the cross-ambiguity function domain to exploit integration gain, system resolution and the sparsity of targets in this domain. A modified two-stage detection scheme is described, which is based on a previously-published one by other authors. All of these contributions are validated in a real semiurban scenario, proving the capabilities of detection, the direction of arrival estimation and the tracking of ground targets in the presence of big buildings that generate strong clutter returns. Detection performance is validated through the probability of false alarm and the probability of detection estimation with specified estimation errors.
The application of supervised learning machines trained to minimize the Cross-Entropy error to radar detection is explored in this article. The detector is implemented with a learning machine that implements a discriminant function, which output is compared to a threshold selected to fix a desired probability of false alarm. The study is based on the calculation of the function the learning machine approximates to during training, and the application of a sufficient condition for a discriminant function to be used to approximate the optimum Neyman-Pearson (NP) detector. In this article, the function a supervised learning machine approximates to after being trained to minimize the Cross-Entropy error is obtained. This discriminant function can be used to implement the NP detector, which maximizes the probability of detection, maintaining the probability of false alarm below or equal to a predefined value. Some experiments about signal detection using neural networks are also presented to test the validity of the study.
Statistical analysis of radar clutter has always been one of the topics, where more effort has been put in the last few decades. These studies were usually focused on finding the statistical models that better fitted the clutter distribution; however, the goal of this work is not the modeling of the clutter, but the study of the suitability of the statistical parameters to carry out a sea state classification. In order to achieve this objective and provide some relevance to this study, an important set of maritime and coastal Synthetic Aperture Radar data is considered. Due to the nature of the acquisition of data by SAR sensors, speckle noise is inherent to these data, and a specific study of how this noise affects the clutter distribution is also performed in this work. In pursuit of a sense of wholeness, a thorough study of the most suitable statistical parameters, as well as the most adequate classifier is carried out, achieving excellent results in terms of classification success rates. These concluding results confirm that a sea state classification is not only viable, but also successful using statistical parameters different from those of the best modeling distribution and applying a speckle filter, which allows a better characterization of the parameters used to distinguish between different sea states.
This paper deals with the reduction of the ambiguity peaks that appear in the Cross Ambiguity Function used in a passive radar system, which uses DVB-T signals as Illuminator of Opportunity. Three methods are proposed, consisting in replacing the elements that are responsible of the ambiguity peaks, by other elements that do not give rise to periodic components. Ideal 64-QAM symbols, zero power components, and random segments with mean power equal to the acquired signal power, are used for this purpose. The obtained results show that a significant reduction of the ambiguity peaks is obtained, but with an undesired reduction in detection capabilities, due to the decrement in the main peak to pedestal level ratio.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.