Novel dielectric insulation gases used as alternatives to sulfur hexafluoride in gas-insulated switchgear (GIS) include several mixtures containing fluorinated organic compounds. We developed a fiber-optic analyzer enabling concentration measurement of fluoroketones used in medium- and high-voltage switchgear applications by ABB, with concurrent compensation of disturbing effects caused by dust and dirt. The sensor enables measurements in GIS and even in operating high-voltage circuit breakers. The online availability of concentration readings of fluoroketones is important for development tests, but can also be applied for monitoring or diagnostics of field installations.

The electric breakdown at single and multiple protrusions in SF6 and CO2 is investigated at 0.4 and 0.6 MPa, respectively. Additionally, the breakdown fields at rough surfaces of two different areas were determined. From the measurements, breakdown probability distributions for single protrusions were determined and fitted by Weibull distributions. This allowed the determination of statistical enlargement laws for the 50% breakdown probability fields E50. Such enlargement laws describe, for example, the scaling of breakdown field with electrode area or number of protrusions. The predictions were compared to the experimental data, and both agreement and discrepancies were observed depending on polarity and number of protrusions and gas. Discharge predictions including first electron, streamer inception and crossing, as well as leader propagation, gave further insight to this. It was found that predictions from enlargement laws based on statistical processes may not describe the measured breakdown fields well and that relevant physical breakdown criteria must also be considered.

Recent results of experimental and theoretical investigations on current interruption processes are presented with a focus on SF6 high voltage circuit breakers. Various aspects of thermal interruption at the zero crossing of the current are shown, including the scatter and the distribution of arc voltage shortly before CZ and the role of turbulence. The thermal interruption capability of air and CO2 are compared to that of SF6. Investigations on the dielectric recovery are shown for SF6 and CO2. The breakdown voltage during the dielectric recovery can be described by simple streamer and leader inception models. (© 2014 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)

This study deals with gaseous insulation contaminated by free moving particles. Two gases were investigated: SF6 (0.45 MPa) and a CO2/O2 gas mixture (0.75 MPa). Video recordings were used to track a free particle moving between a plate and a Rogowski electrode for validation of a 1D particle motion model. The effect of fixed and free particles (4 or 8 mm, Ø 0.9 mm) on the breakdown voltage and the mean time between breakdowns was determined in a concentric set of electrodes. The value of the breakdown voltage for a free particle was between those of a particle fixed to the enclosure and the central electrode. The particle motion in the concentric case could not be observed in the experimental set-up and was therefore simulated using a 1D model. For the 4 mm free particle, the breakdown seemed to be initiated in the inter-electrode gap in CO2 and at the crossing in SF6, while for the 8 mm particle, breakdown occurred at lift-off in both gases. A parameter k describing the width of the time to breakdown distribution was introduced. A low value of k was associated with the breakdown from the particles at the electrodes, while k was larger than 10 when the breakdown was decided during particle flight.