Designing tunable optical metamaterials is one of the great challenges in photonics. Strategies for reversible tuning of nanoengineered devices are currently being sought through electromagnetic or piezo effects. For example, bottom-up self-assembly of nanoparticles at solid | liquid or liquid | liquid interfaces can be used to tune optical responses by varying their structure either chemically or through applied voltage. Here, we report on a fully reversible tunable-color mirror based on a TiN-coated Ag substrate immersed in an aqueous solution of negatively charged Au-nanoparticles (NPs). Switching electrode potential can be used to fully control the assembly/disassembly of NPs at the electrode | electrolyte interface within a 0.6 V wide electrochemical window. The plasmon coupling between the electrode and the adsorbed NP array at high positive potentials produces a dip in the optical reflectance spectrum, creating the “absorber” state. Desorption of NPs at low potentials eliminates the dip, returning the system to the reflective “mirror” state. The intensity and wavelength of the dip can be finely tuned through electrode-potential and electrolyte concentration. The excellent match between the experimental data and the theory of optical response for such system allows us to extract valuable information on equilibrium and kinetic properties of NP-assembly/disassembly. Together with modeling of the latter, this study promotes optimization of such meta-surfaces for building electrotunable reflector devices.

We present a novel plasmonic antenna structure, a split-wedge antenna, created by splitting an ultrasharp metallic wedge with a nanogap perpendicular to its apex. The nanogap can tightly confine gap plasmons and boost the local optical field intensity in and around these opposing metallic wedge tips. This three-dimensional split-wedge antenna integrates the key features of nanogaps and sharp tips, i.e., tight field confinement and three-dimensional nanofocusing, respectively, into a single platform. We fabricate split-wedge antennas with gaps that are as small as 1 nm in width at the wafer scale by combining silicon V-grooves with template stripping and atomic layer lithography. Computer simulations show that the field enhancement and confinement are stronger at the tip–gap interface compared to what standalone tips or nanogaps produce, with electric field amplitude enhancement factors exceeding 50 when near-infrared light is focused on the tip–gap geometry. The resulting nanometric hotspot volume is on the order of λ3/106. Experimentally, Raman enhancement factors exceeding 107 are observed from a 2 nm gap split-wedge antenna, demonstrating its potential for sensing and spectroscopy applications.

A plasmonic nanohole sensor for virus-like particle capture and virucidal drug evaluation is reported. Using a materials-selective surface functionalization scheme, passive immobilization of virus-like particles only within the nanoholes is achieved. The findings demonstrate that a low surface coverage of particles only inside the functionalized nanoholes significantly improves nanoplasmonic sensing performance over conventional nanohole arrays.

A rapid, label-free, and broadly applicable chemical analysis platform for nanovesicles and subcellular components is highly desirable for diagnostic assays. We demonstrate an integrated nanogap plasmonic sensing platform that combines subvolt dielectrophoresis (DEP) trapping, gold nanoparticles (AuNPs), and a lineated illumination scheme for real-time, surface-enhanced Raman spectroscopy (SERS) imaging of biological nanoparticles. Our system is capable of isolating suspended sub-100 nm vesicles and imaging the Raman spectra of their cargo within seconds, 100 times faster than conventional point-scan Raman systems. Bare AuNPs are spiked into solution and simultaneously trapped with the nanovesicles along the gap to boost local optical fields. In addition, our platform offers simultaneous and delay-free spatial and temporal multiplexing functionality. These nanogap devices can be mass-produced via atomic layer lithography and provide a practical platform for high-speed SERS analysis of biological nanoparticles.

Tuning the properties of optical metamaterials in real time is one of the grand challenges of photonics. Being able to do so will enable a class of adaptive photonic materials for use in applications such as surface enhanced Raman spectroscopy and reflectors/absorbers. One strategy to achieving this goal is based on the electrovariable self-assembly and disassembly of two-dimensional nanoparticle arrays at a metal | liquid interface. As expected, the structure results in plasmonic coupling between NPs in the array but perhaps as importantly between the array and the metal surface. In such a system, the density of the nanoparticle array can be reversibly controlled by the variation of electrode potential. Theory suggests that due to a collective plasmon-coupling effect  less than 1 V variation of electrode potential can give rise to a dramatic simultaneous change in optical reflectivity from ∼93% to ∼1% and the amplification of the SERS signal by up to 5 orders of magnitude. This is experimentally demonstrated using a platform based on the voltage-controlled assembly of 40 nm Au-nanoparticle arrays at a TiN/Ag electrode in contact with an aqueous electrolyte. We show that all the physics underpinning the behavior of this platform works precisely as suggested by the proposed theory, setting the electrochemical nanoplasmonics as a promising direction in photonics research.