Foi realizado um estudo da vegetação de um fragmento de Floresta Estacional Decidual, na localidade de São Roque, município de Jaguari, RS, Brasil, com objetivo de caracterizar a diversidade florística, bem como as espécies mais importantes na composição do fragmento. Para a avaliação e identificação das espécies arbóreas com Circunferência à Altura do Peito (CAP) = 30cm, foram demarcadas de maneira sistemática, 14 unidades amostrais de 10x100 m (1000 m²). Nestas, foram avaliadas a espécie vegetal, CAP, altura total, altura comercial, posição sociológica e classe de copa. Observou-se a ocorrência de 54 espécies arbóreas e 28 famílias. O Índice de Diversidade de Shannon foi de 3,63, indicando elevada diversidade de espécies no fragmento. As famílias Sapindaceae, Myrtaceae e Meliaceae foram, em número de espécies, as mais representativas do fragmento, sendo que as espécies com maior valor de importância foram Cupania vernalis, Patagonula americana e Cabralea canjerana. No estrato superior, as espécies dominantes foram Patagonula americana, Cabralea canjerana e Luehea divaricata.
Neste trabalho, foram investigadas a massa específica básica e a massa seca de madeira e de casca de Eucalyptus grandis W Hill ex-Maiden em função de 12 espaçamentos de plantio. A madeira foi retirada de árvores procedentes de unidades experimentais da AFUBRA com idade aproximada de 10 anos. Foram utilizadas 36 árvores (três por parcela) nos ensaios. Discos na base, DAP, 25, 50, 75 e 100% da altura comercial foram retirados de cada árvore para determinação da massa específica básica da madeira e da casca. Exceto para os menores espaçamentos, houve uma redução da massa específica básica e da massa seca de madeira e de casca com o aumento do espaço vital. Os espaçamentos entre linhas de plantio que produziram os maiores valores das variáveis estudadas situaram-se entre 1,5 e 2 m.
Neste trabalho, foram confeccionadas e testadas chapas aglomeradas estruturais utilizando partículas de Pinus elliottii Engelm com dimensões nominais de 110, 75 e 40 mm de comprimento, 0,5 e 1,0 mm de espessura e 20 mm de largura. As partículas foram orientadas ao acaso em moldes sem-fundo com dimensões de 50 x 50 x 20 cm. Os colchões foram prensados a 1800C por 10 minutos até atingir espessura de 9,5 mm e densidade de, aproximadamente, 0,7 g/cm3. O adesivo utilizado foi 8% (em relação ao peso seco das partículas) de tanino-formaldeído. Foram analisadas as propriedades de flexão estática, ligação interna, resistência ao arrancamento de parafusos, dureza Janka, inchamento em espessura e absorção d'água para 2 e 24 horas de imersão. Todos os testes foram realizados segundo a norma americana ASTM D 1037 (1995). As propriedades de flexão estática (MOR e MOE) aumentaram com o aumento do comprimento e diminuição da espessura das partículas. Já o inchamento em espessura e a resistência ao arrancamento de parafusos aumentaram com o aumento da espessura das partículas.
RESUMOEste trabalho teve como objetivo avaliar a viabilidade da utilização de casca de arroz e partículas de madeira para a manufatura de compósitos, tendo como agente ligante o polietileno de alta densidade (PEAD). Os compósitos foram produzidos com casca de arroz e partículas de madeira de Eucalyptus grandis, puras ou misturadas, sendo que cada tipo participou com 0, 25, 50, 75 e 100% em proporção de peso seco. O PEAD foi usado como matriz na confecção destes, sendo testadas três proporções: 60, 75 e 90%. Os compósitos foram manufaturados de forma similar à fabricação de chapas aglomeradas com as dimensões de 0,5 x 5 x 25 cm formados em camadas em um molde de aço, e foram avaliadas as propriedades de flexão estática, ligação interna, absorção d'água e inchamento em espessura após 24 horas e após 15 ciclos de imersão. Os valores das propriedades de flexão estática foram influenciados pela massa específica do compósito. No caso da ligação interna, os valores ficaram dentro dos padrões estabelecidos pelas normas de comercialização para aglomerados convencionais, sendo o PEAD o parâmetro de maior correlação com essa propriedade. A casca de arroz provocou menor inchamento em espessura e, independente do tipo de matéria-prima utilizada, os valores diminuíram à medida que a proporção de PEAD foi aumentada. Combinações com maior porcentagem de PEAD apresentaram valores mínimos ou, em alguns casos, nulos de absorção d'água. Para a absorção d'água e inchamento em espessura após 15 ciclos, o comportamento dos resultados foi semelhante aos dos testes de inchamento em espessura após 24 horas e absorção d'água após 24 horas. Os resultados permitem concluir que os compósitos produzidos com PEAD, casca de arroz e partículas de madeira puras ou misturadas apresentaram boa qualidade quando comparados aos aglomerados convencionais, evidenciando a viabilidade de uso desses materiais na confecção desse tipo de painel.Palavras-chave: PEAD; partículas de madeira; casca de arroz; compósitos. ABSTRACTThe objective of this work was to analyse the feasibility of the utilization of rice husks and wood particles in the manufacture of wood plastic composites, in a way similar to particleboard fabrication. The composites were made with rice husks and Eucalyptus grandis wood particles, pure or mixed, in proportions of 0, 25, 50, 75 and 100% of ovendry weight. High density polyethylene (HDPE) was used as matrix in the manufacture in three proportions: 60, 75, and 90%. Bending properties, internal bond, water absorption and thickness swelling after 24 hours of water soaking and after 15 soaking cycles were evaluated. The values of bending properties were influenced by the density of the composite. In the case of internal bond, the values were within the limits established by commercial particleboard standards, being the HDPE proportion the parameter of higher correlation with this property. Rice husk caused lower thickness swelling and, independently of the type of raw material utilised, the values decreased with the increase of HDPE. Combinat...
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.