No abstract

Epitaxy is a process by which a thin layer of one crystal is deposited in an ordered fashion onto a substrate crystal. The direct epitaxial growth of semiconductor heterostructures on top of crystalline superconductors has proved challenging. Here, however, we report the successful use of molecular beam epitaxy to grow and integrate niobium nitride (NbN)-based superconductors with the wide-bandgap family of semiconductors-silicon carbide, gallium nitride (GaN) and aluminium gallium nitride (AlGaN). We apply molecular beam epitaxy to grow an AlGaN/GaN quantum-well heterostructure directly on top of an ultrathin crystalline NbN superconductor. The resulting high-mobility, two-dimensional electron gas in the semiconductor exhibits quantum oscillations, and thus enables a semiconductor transistor-an electronic gain element-to be grown and fabricated directly on a crystalline superconductor. Using the epitaxial superconductor as the source load of the transistor, we observe in the transistor output characteristics a negative differential resistance-a feature often used in amplifiers and oscillators. Our demonstration of the direct epitaxial growth of high-quality semiconductor heterostructures and devices on crystalline nitride superconductors opens up the possibility of combining the macroscopic quantum effects of superconductors with the electronic, photonic and piezoelectric properties of the group III/nitride semiconductor family.

The microstructure of InxAl1−xN∕GaN heterostructures (where x∼0.13–0.19), grown by molecular beam epitaxy, was investigated by transmission electron microscopy. Observations in the cross-section and plan-view geometries show evidence for lateral phase separation originating at the GaN surface that results in a vertical honeycomblike structure within the InAlN layers. The lateral dimensions of the honeycomb cells are ∼5–10nm. The vertical walls are In rich with a width of ∼1–2nm and align roughly perpendicular to ⟨112¯0⟩ and ⟨11¯00⟩ directions. The phase separation is attributed to random compositional fluctuations during the early stages of growth, possibly associated with misfit-strain relaxation.

No abstract

ScxAl1-xN is a promising ultra-wide bandgap material with a variety of potential applications in electronic, optoelectronic, and acoustoelectric devices related to its large piezoelectric and spontaneous polarization coefficients. We demonstrate growth of ScxAl1-xN on GaN and SiC substrates using plasma-assisted molecular beam epitaxy with x = 0.14–0.24. For metal-rich growth conditions, mixed cubic and wurtzite phases formed, while excellent film quality was demonstrated under N-rich growth conditions at temperatures between 520 and 730 °C. An rms roughness as low as 0.7 nm and 0002 rocking curve full-width at half maximum as low as 265 arc sec were measured for a Sc0.16Al0.84 N film on GaN. To further demonstrate the quality of the ScAlN material, a high-electron-mobility transistor heterostructure with a Sc0.14Al0.86 N barrier, GaN/AlN interlayers, and a GaN buffer was grown on SiC, which showed the presence of a two-dimensional electron gas with a sheet charge density of 3.4 × 1013 cm−2 and a Hall mobility of 910 cm2/V·s, resulting in a low sheet resistance of 213 Ω/◻.

The detection limit of infrared thermographic investigations can be improved down to 10 µK by using a highly sensitive high-speed infrared camera in an online averaging lock-in thermography system. Together with a microscope objective, this allows lock-in thermography to be used as a simple and sensitive technique to localize the sites of leakage currents and other heat sources in electronic components. The practical realization of a novel lock-in thermography system is described and both test measurements and practical applications are introduced. The detection limit for surface-near local heat sources in silicon is a few microwatts with a spatial resolution down to 5 µm. Leakage sites in several microelectronic structures are imaged and assigned to the layout of the integrated circuit by comparing direct images with lock-in ones. The direct comparison of an averaged and background-subtracted stationary thermogram with a lock-in one, both measured under similar conditions at the same sample, clearly demonstrates the gain in information obtained by using lock-in thermography

Public reporting burden for the collection of information is estimated to average 1 hour per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing this burden, to Washington Headquarters Services, Directorate for Information Operations and Reports, 1215 Jefferson Davis Highway, Suite 1204, Arlington VA 22202-4302. Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to a penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number.

Solid-state quantum acoustodynamic (QAD) systems provide a compact platform for quantum information storage and processing by coupling acoustic phonon sources with superconducting or spin qubits. The multi-mode composite high-overtone bulk acoustic wave resonator (HBAR) is a popular phonon source well suited for QAD. However, scattering from defects, grain boundaries, and interfacial/surface roughness in the composite transducer severely limits the phonon relaxation time in sputter-deposited devices. Here, we grow an epitaxial-HBAR, consisting of a metallic NbN bottom electrode and a piezoelectric GaN film on a SiC substrate. The acoustic impedance-matched epi-HBAR has a power injection efficiency >99% from transducer to phonon cavity. The smooth interfaces and low defect density reduce phonon losses, yielding (f × Q) and phonon lifetimes up to 1.36 × 10 17 Hz and 500 µs respectively. The GaN/NbN/SiC epi-HBAR is an electrically actuated, multi-mode phonon source that can be directly interfaced with NbN-based superconducting qubits or SiC-based spin qubits.