Black crust growth mechanisms on three French building stones are described using diagenetic models that reveal the close links between the crust–stone interfaces and the microfacies of the host limestone. Each limestone is representative of a specific sedimentary facies and displays mixed pore structure: crinoidal limestone (Euville limestone), oolitic limestone (Savonnières limestone) and bioclastic matrix-supported limestone (Courville limestone). The crinoidal limestone is mainly made of well-developed calcitic cement (spar syntaxial calcite) with low macrocroporosity (15–20 vol. %). The oolitic limestone is macroporous (30–40 vol. %), oolite nucleus being partially or completely dissolved. The third building stone studied is less porous (14 vol. %) but presents a significant microporosity.Weathering of the Euville limestone proceeds primarily through preferential exploitation of cleavages and microcracks and secondly by progressive recrystallization in the areas separated by previous gypsum fill-in (micro-box work). In the Savonnières limestone (oolitic limestone), gypsum recrystallization could occur without microcracks: elements are sometimes nearly totally weathered, while the palisadic calcitic cement surrounding the oolites was still preserved. In the matrix-supported limestone (Courville limestone), weathering could deeply affect the matrix while elements are not weathered. When a layer of microcrystalline calcite is observed on the surface of the limestone, however, the black crust growth seems to be limited to the external part of the stone.Porous characteristics of limestones directly depend on sedimentary and diagenetic phases developed. The pore network controls moisture movement and also determines the reactivity of the stone to gypsum recrystallization.

No abstract

No abstract

Articles you may be interested inAnalysis of electrical charging and discharging kinetics of different glasses under electron irradiation in a scanning electron microscope J. Appl. Phys. 108, 093705 (2010); 10.1063/1.3499692 Scenario for time evolution of insulator charging under various focused electron irradiations J. Appl. Phys. 95, 731 (2004); 10.1063/1.1632015 Quantitative measurement of surface potential and amount of charging on insulator surface under electron beam irradiationThe charge properties, under electron irradiation, of three types of glasses are studied by employing scanning electron microscope ͑SEM͒ associated with the technique called the electrostatic influence method. The experimental conditions are closed to those of typical field emission display ͑FED͒ operation. To determine the amount of trapped charges during and after electron irradiation, a special arrangement adapted to the SEM was used. This arrangement allows displacement and leakage currents to be simultaneously measured. The secondary electron emission yield during electron irradiation is also deduced. The trapping ability of each glass is analyzed taking into account the regulation mechanisms involved under electron irradiation. Finally useful indications permitting an adequate selection of glasses that may be used as FED spacers are deduced.

Recent developments in X-ray projection microscopy and X-ray microtomography applied to materials science