Laser soldering is a current biophotonic technique for the surgical recovery of the integrity of soft tissues. This technology involves the use of a device providing laser exposure to the cut edges of the wound with a solder applied. The proposed solder consisted of an aqueous dispersion of biopolymer albumin (25 wt.%), single-walled carbon nanotubes (0.1 wt.%) and exogenous indocyanine green chromophore (0.1 wt.%). Under laser exposure, the dispersion transforms into a nanocomposite due to the absorption of radiation and its conversion into heat. The nanocomposite is a frame structure of carbon nanotubes in a biopolymer matrix, which provides adhesion of the wound edges and the formation of a strong laser weld. A new laser device based on a diode laser (808 nm) has been developed to implement the method. The device has a temperature feedback system based on a bolometric infrared matrix sensor. The system determines the hottest area of the laser weld and adjusts the current supplied to the diode laser to maintain the preset laser heating temperature. The laser soldering technology made it possible to heal linear defects (cuts) in the skin of laboratory animals (rabbits) without the formation of a fibrotic scar compared to the control (suture material). The combined use of a biopolymer nanocomposite solder and a laser device made it possible to achieve a tensile strength of the laser welds of 4 ± 0.4 MPa. The results of the experiment demonstrated that the addition of single-walled carbon nanotubes to the solder composition leads to an increase in the ultimate tensile strength of the laser welds by 80%. The analysis of regenerative and morphological features in the early stages (1–3 days) after surgery revealed small wound gaps, a decrease in inflammation, the absence of microcirculatory disorders and an earlier epithelization of laser welds compared to the control. On the 10th day after the surgical operation, the laser weld was characterized by a thin cosmetic scar and a continuous epidermis covering the defect. An immunohistochemical analysis proved the absence of myofibroblasts in the area of the laser welds.
Исследованы структурные особенности нанокомпозитов, полученных при лазерном облучении водно-белковых сред с одностенными углеродными нанотрубками (ОУНТ), электродуговым (ОУНТI) и газофазным методами (ОУНТII). С помощью спектроскопии комбинационного рассеяния нанокомпозитов определен нековалентный характер взаимодействия нанотрубок с молекулами белков. Белковая составляющая в нанокомпозитах подверглась необратимой денатурации и может выступать в качестве связующего биосовместимого материала, который является источником аминокислот для биологических тканей при имплантации нанокомпозитов в организм. Образцы, изготовленные из ОУНТI, с меньшим диаметром и длиной имели наиболее однородную структуру. При увеличении концентрации от 0.01 до 0.1 % происходило увеличение среднего размерамикропор от 45 до 85 мкм и пористости образца в общем с 46 до 58 %. При этом доля открытых пор для двух типов концентраций ОУНТI составила 2 % от общего объема композита. В нанокомпозитах на основе ОУНТI показано наличие мезопор. Увеличение концентрации нанотрубок привело к уменьшению удельных значений поверхности и объема пор образца. Исследованные нанокомпозиты могут использоваться в качестве тканеинженерных матриц для восстановления объемных дефектов биологических тканей REFERENCES Eletskii A. V. Carbon nanotubes. Usp., 1997, v. 40(9), pp. 899–924. https://dji.org/10.1070/PU1997v040n09ABEH000282 Tuchin A. V., Tyapkina V. A., Bityutskaya L. A., Bormontov E. N. Functionalization of capped ultrashort single-walled carbon nanotube (5, 5). Condensed matter and interphases, 2016, v. 18(4), pp. 568–577. URL: http://www.kcmf.vsu.ru/resources/t_18_4_2016_015.pdf (in Russ.) Dolgikh I., Tyapkina V. A., Kovaleva T. A., Bityutskaya L. A. 3D Topological changes in enzyme glucoamylase when immobilized on ulrta0short carbon naotubes. Condensed matter and interphases, 2016, v. 18(4), pp. 505–512. URL: http://www.kcmf.vsu.ru/resources/t_18_4_2016_007.pdf (in Russ.) Kulikova T. V., Tuchin A. V., Testov D. A., Bityutskaya L. A., Bormontov E. N., Averin A. A. Structure and properties of self-organized 2D and 3D antimony/carbon composites. Technical Physics, 2018, v. 63(7), pp. 995–1001. https://doi.org/10.1134/S1063784218070216 Kulikova T. V., Bityutskaya L. A., Tuchin A. V., Lisov E. V., Nesterov S. I., Averin A. A., Agapov B. L. Structural heterogeneities and electronic effects in self-organized core-shell type structures of Sb. Letters on materials, 2017, v. 7(4), pp. 350–354. https://doi.org/10.22226/2410-3535-2017-4-350-354 Gerasimenko A. Yu. Laser structuring of the carbon nanotubes ensemble intended to form biocompatible ordered composite materials. Condensed matter and interphases, 2017, v. 19(4), pp. 489–501. https://doi.org/10.17308/kcmf.2017.19/227 Ma R. Z., Wei B. Q., Xu C. L., Liang J., Wu D. H. The morphology changes of carbon nanotubes under laser irradiation. Carbon, 2000, vol. 38(4), pp. 636–638. https://doi.org/10.1016/s0008-6223(00)00008-7 Sadeghpour H. R., Brian E. Interaction of laser light and electrons with nanotubes. Physica Scripta, 2004, vol. 110, pp. 262–267. https://doi.org/10.1238/physica. topical.110a00262 Gyorgy E., Perez del Pino A., Roqueta J., Ballesteros B., Cabana L., Tobias G. Effect of laser radiation on multi-wall carbon nanotubes: study of shell structure and immobilization process. of Nanoparticle Research, 2013, v. 15(8), p. 1852. https://doi.org/10.1007/s11051-013-1852-6 Krasheninnikov A. V., Banhart F. Engineering of nanostructured carbon materials with electron or ion beams. Nature Materials, 2007, v. 6(10), pp. 723–733. https://doi.org/10.1038/nmat1996 Ogihara N., Usui Y., Aoki K., Shimizu M., Narita N., Hara K., Nakamura K., Ishigaki N., Takanashi S., Okamoto M., Kato H., Haniu H., Ogiwara N., Nakayama N., Taruta S., Saito N. Biocompatibility and bone tissue compatibility of alumina ceramics reinforced with carbon nanotubes. Nanomedicine, 2012, v. 7(7), pp. 981–993. https://doi.org/10.2217/nnm.12.1 Abarrategi A., Gutiérrez M.C., Moreno-Vicente C., Hortigüela M. J., Ramos V., Lуpez-Lacomba J. L., Ferrer M. L., del Monte F. Multiwall carbon nanotube scaffolds for tissue engineering purposes. Biomaterials, 2008, v. 29(1), pp. 94–102. https://doi.org/10.1016/j.biomaterials.2007.09.021 Newman P., Minett A., Ellis-Behnke R., Zreiqat H. Carbon nanotubes: Their potential and pitfalls for bone tissue regeneration and engineering. Nanomedicine, 2013, v. 9(8), pp. 1139–1158. https://doi.org/10.1016/j.nano.2013.06.001 Sahithi K., Swetha M., Ramasamy K., Selvamurugan N. Polymeric composites containing carbon nanotubes for bone tissue engineering. International journal of biological macromolecules, 2010, v. 46(3). pp. 281–283. https://doi.org/10.1016/j.ijbiomac.2010.01.006 Pan L., Pei, He R., Wan Q., Wang J. Colloids and Surfaces B: Biointerfaces, 2012, vol. 93, pp. 226–234. https://doi.org/10.1016/j.colsurfb.2012.01.011 Mattioli-Belmonte M., Vozzi G, Whulanza Y., Seggiani M., Fantauzzi V., Orsini G., Ahluwalia A. Tuning polycaprolactone–carbon nanotube composites for bone tissue engineering scaffolds. Materials Science and Engineering: C, 2012, v. 32(2), pp. 152–159. https://doi.org/10.1016/j.msec.2011.10.010 Venkatesan J., Qian Z., Ryu B., Kumar N.A., Kim S. Preparation and characterization of carbon nanotube-grafted-chitosan – Natural hydroxyapatite composite for bone tissue engineering. Carbohydrate Polymers, 2011, v. 83(2). pp. 569–577. https://doi.org/10.1016/j.carbpol.2010.08.019 Lin C., Wang Y., Lai Y., Yang W., Jiao F., Zhang H., Shefang Ye., Zhang Q. Incorporation of carboxylation multiwalled carbon nanotubes into biodegradable poly(lactic-co-glycolic acid) for bone tissue engineering. Colloids and Surfaces B: Biointerfaces, 2011, v. 83(2), pp. 367–375. https://doi.org/10.1016/j.colsurfb.2010.12.011 Gerasimenko A. Yu. , Glukhova O. E., Savostyanov G. V., Podgaetsky V. M. Laser structuring of carbon nanotubes in the albumin matrix for the creation of composite biostructures. Journal of Biomedical Optics, 2017, v. 22(6), pp. 065003-1–065003-8. https://doi.org/10.1117/1.jbo.22.6.065003
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.