No abstract

In recent years, the terrestrial laser scanning system (TLS) has become one of the most popular remote and nondestructive testing (NDT) methods for diagnostic measurements of buildings and structures as well as for the assessment of architectural heritage. Apart from 3D coordinates, the power of a laser beam backscattered from the scanned object can be captured by TLS. The radiometric information of the point cloud, called “intensity”, can provide information about changes in the physio–chemical properties of the scanned surface. This intensity can be effectively used to detect defects in the surfaces of walls, such as cracks and cavities, moisture, biodeterioration (mosses and lichens) or weathered parts of the wall. Manufacturers of TLS mainly use two different principles for distance measurement, time-of-flight (TOF) and phase-shift (PS). The power of energy in both types of rangefinders might be absorbed or reflected in a slightly different way and provide more or less detailed radiometric point cloud information. The main aim of this investigation is to compare TOF and PS scanners in the context of using TLS intensity data for the diagnostics of buildings and other structures. The potential of TLS intensity data for detecting defects in building walls has been tested on multiple samples by two TOF (Riegl VZ400i, Leica ScanStation C10) and two PS (Z + F 5016 IMAGER, Faro Focus3D) scanners.

Terrestrial laser scanning (TLS) is a non-destructive testing method for the technical assessment of existing structures. TLS has been successfully harnessed for monitoring technical surface conditions and morphological characteristics of historical buildings (e.g., the detection of cracks and cavities). TLS measurements with very high resolution should be taken to detect minor defects on the walls of buildings. High-resolution measurements are mostly needed in certain areas of interest, e.g., cracks and cavities. Therefore, reducing redundant information on flat areas without cracks and cavities is very important. In this case, automatic down-sampling of datasets according to the aforementioned criterion is required. This paper presents the use of the Optimum Dataset (OptD) method to optimize TLS dataset. A Leica ScanStation C10 time-of-flight scanner and a Z+F IMAGER 5016 phase-shift scanner were used during the research. The research was conducted on a specially prepared concrete sample and real object, i.e., a brick citadel located on the Kościuszko Mound in Cracow. The reduction of dataset by the OptD method and random method from TLS measurements were compared and discussed. The results prove that the large datasets from TLS diagnostic measurements of buildings and structures can be successfully optimized using the OptD method.

Non Destructive Testing (NDT) is a key element of modern civil engineering. It is especially important in civil and structural engineering helping both in quality control of produced elements and technical assessments of existing structures. Existing NDT methods are being continuously improved and new methods are developed or adopted from different engineering fields. Terrestrial Laser Scanner (TLS) method which is commonly used for geodetic applications has a great potential to be successfully harnessed in civil and structural engineering. TLS can be used for remote sensing of saturation of building materials. A research programme was prepared in order to prove this concept. Specimens representing most popular European building materials were scanned using TLS. Tested specimens were in different saturation states including capillary rising saturation. The saturation assessment was based on differences of values of intensity. The concept proved to be feasible and technically realistic.

No abstract

Detection of bio-deterioration and moisture is one of the most important tasks for comprehensive diagnostic measurements of buildings and structures. Any undesirable change in the material properties caused by the action of biological agents contributes to gradual aesthetic and physical damage to buildings. Very often, such surface changes can lead to structural defects or poor maintenance. In this paper, radiometric analysis of point clouds is proposed for moisture and biofilm detection in building walls. Recent studies show that remote terrestrial laser scanning (TLS) technology is very useful for registering and evaluating the technical state of the deterioration of building walls caused by moisture and microorganisms. Two different types of TLS, time-of-flight and phase-shift scanners, were used in the study. The potential of TLS radiometric data for detecting moisture and biofilm on wall surfaces was tested on two buildings. The main aim of the research is to compare two types of scanners in the context of their use in the detection of moisture and microorganisms.

Historic buildings, due to their architectural, cultural, and historical value, are the subject of preservation and conservatory works. Such operations are preceded by an inventory of the object. One of the tools that can be applied for such purposes is Light Detection and Ranging (LiDAR). This technology provides information about the position, reflection, and intensity values of individual points; thus, it allows for the creation of a realistic visualization of the entire scanned object. Due to the fact that LiDAR allows one to ‘see’ and extract information about the structure of an object without the need for external lighting or daylight, it can be a reliable and very convenient tool for data analysis for improving safety and avoiding disasters. The main goal of this paper is to present an approach of automatic wall defect detection in unlit sites by means of a modified Optimum Dataset (OptD) method. In this study, the results of Terrestrial Laser Scanning (TLS) measurements conducted in two historic buildings in rooms without daylight are presented. One location was in the basement of the ruins of a medieval tower located in Dobre Miasto, Poland, and the second was in the basement of a century-old building located at the University of Warmia and Mazury in Olsztyn, Poland. The measurements were performed by means of a Leica C-10 scanner. The acquired dataset of x, y, z, and intensity was processed by the OptD method. The OptD operates in such a way that within the area of interest where surfaces are imperfect (e.g., due to cracks and cavities), more points are preserved, while at homogeneous surfaces (areas of low interest), more points are removed (redundant information). The OptD algorithm was additionally modified by introducing options to detect and segment defects on a scale from 0 to 3 (0—harmless, 1—to the inventory, 2—requiring repair, 3—dangerous). The survey results obtained proved the high effectiveness of the modified OptD method in the detection and segmentation of the wall defects. The values of area of changes were calculated. The obtained information about the size of the change can be used to estimate the costs of repair, renovation, and reconstruction.

Building constructions are exposed to various forces and natural phenomena. Some of them are sudden and violent, e.g., an earthquake or heavy rains, causing a displacement of the ground. Other phenomena affect objects on a longer-term, e.g., vibrations caused by daily road traffic. Sometimes, building structures may have defects due to incorrect construction. In any case, if an engineering object shows changes in the relation to its correct geometry or position, deformation and displacement measurements are required. Engineering objects are also monitored during their construction. Nowadays, it is important to perform measurements quickly and with high accuracy. The use of a Terrestrial Laser Scanning (TLS) allows for the required measurement speed and accuracy. This measurement technology allows a large dataset, which can be arbitrarily elaborated, to be obtained. The structure of building objects can include vertices, lines, planes, and other shapes and can be described using mathematical functions. This allows data processing to be automated. In this article, we present the Msplit method as an effective approach to the processing of data obtained as a result of TLS measurements. The proposed approach is new because until now, the Msplit estimation method has not been used to detect adjacent planes in one-point cloud obtained from TLS. The Msplit estimation method allows a functional model to be split into two or more competitive models and thus two or more entities in a point cloud to be estimated simultaneously. Four different objects measured using TLS are presented: two objects representing vertical displacements and two objects representing horizontal displacements. The test results and analysis confirm that the Msplit estimation method can be successfully applied in the detection of adjacent planes.