Heat exchangers are used in many applications including chemical, oil, and gas power generation, refrigeration, pharmaceuticals, and food processing. Because of their widespread usage, they have various types to serve at different working conditions. Increasing the performance of heat exchangers has become a very interesting field of study since the efficiency of various industrial and domestic systems depend on them. In this study, a coaxial double tube experimental set-up was prepared, and the effect of using nanohexagonal boron nitride nanofluid as hot working fluid on the heat transfer performance increase was investigated. The experiments were carried out in concurrent flow and counter flow conditions for various hot fluid-flow rates to obtain the heat transfer coefficients. Nanohexagonal boron nitride obtained in powder form was used to prepare the nanofluid by a two-step method. The 4 kg nanofluid containing 2% nanohexagonal boron nitride with 0.5% Triton X-100 as a surfactant in terms of mass ratio was prepared for the experiments. Heat transfer experiments were carried out three times by using the prepared nanohexagonal boron nitride/water nanofluid and pure water as hot fluid to reach more precise results. In the result of this study, the total heat transfer coefficient showed an average improvement of 48.78% for the concurrent flow heat exchanger, while an average improvement of 0.36% was observed in the counter flow conditions compared to the base fluid. This study shows the potential of application of nanohexagonal boron nitride/water nanofluid in heat management applications.
This paper deals with the effects of absorbent used on the thermal performance of commercial diffusion absorption refrigeration systems (DARSs). For this purpose, an ammonia solution with added lithium bromide was used in the DARS system instead of a commercial ammonia solution of NH3-H2O (NH4OH) (25% ammonia and 75% water), and all comparison experiments used a fixed amount of refrigerant to experimentally investigate the effects on performance. The system cooling performance was calculated by means of experimental data. The performance of all the solutions prepared was compared to each other. The added lithium bromide increased the amount of water absorbed by the coolant, increasing the amount of refrigerant carried to the generator and condenser. Consequently, the thermal efficiency of the system was increased. By using a 5% solution of lithium bromide with the ammonia solution, the thermal performance increased by up to 12%. It was concluded that lithium bromide has a higher refrigerant absorption capability than water in diffusion absorption refrigeration systems.
Enerjiye olan talep günden güne artmaktadır ve aynı zamanda ekonomi de bu büyüme ile ele alınacak önemli bir konudur. Bu bakımdan, birçok ülke enerji yoğunluğunu (birim ekonomik çıktı için harcanan veya tüketilen enerji) azaltmak için önemli roller üstlenmektedir halbuki bu değişken uluslar arası karşılaştırmalar için sadece tek bir faktördür. Enerji yoğunluğu ile birlikte birçok parametre içeren bu çalışma ülkelerin enerji etkinliğini ölçmektedir ve bu ülkeler arasında Türkiye'nin konumunu belirlemektedir. Veri zarflama analizi (VZA) çoklu girdi ve çıktı kullanarak benzer türden karar verme birimleri (KVB) için etkinlik değerlendirme amaçlı kullanılan parametrik olmayan bir yöntemdir. Analizlerde, 2009-2013 dönemi için OECD ve BRICS (Brezilya, Rusya, Hindistan, Çin Halk Cumhuriyeti, Güney Afrika) ülkeleri kullanılmıştır. Bu dönem için, VZA analizlerinin dinamik seyrini izlemek üzere Malmquist verimlilik endeksi (MVE) yöntemi de kullanılmıştır. OECD (Ekonomik Kalkınma ve İşbirliği Örgütü) ve BRICS (Brezilya, Rusya, Hindistan, Çin ve Güney Afrika) ülkelerinin etkinlik analizi 2009 yılından 2013 yılına kadar yapılmıştır. Sonuçlar göre, etkin ülkeler OECD grubu ülkeler içerisindedir ve ortalama MVE ise dönem boyunca %1.4 kötüleşmiştir. OECD üyesi bir ülke olan Türkiye 0.048 değeri ile etkin bir ülke değildir ve MVE değeri tüm dönem boyunca %4.5 kötüleşmiştir. Çünkü enerji ithalatı Türkiye için son yıllarda önemli bir tehdit haline gelmiş olup, bulgular Türkiye'nin göreli konumunu görmede ve tedbir almasında yardımcı olacaktır. Sonuç olarak, Türkiye'nin etkinliğini arttırması için bazı önerilerde bulunulmuştur.
Yüksek sıcaklık pişirme fırınlarındaki sıcaklık dağılımı, ürünün çatlaması, kırılması ve hatalı olarak atıl duruma düşmesinde en önemli kriterdir. Pişirme süresince sıcaklık dağılımının homojen olarak fırın içerisindeki dağılımında brülörlerin konumu, debisi, alev boyu gibi pek çok parametre etkilidir. Bu parametrelere göre seramik pişirme fırınlarındaki sıcaklık dağılımının sayısal analizi hesaplamalı akışkanlar dinamiği ile yapılmıştır. Bu çalışma ile sıcaklık dağılımı ve fırın içerisindeki hava akış hızlarının dağılımı FLUENT 6.2.16 kullanılarak sayısal modelleme çalışması yapılmıştır.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.