Action origami is a field of origami dealing with models that are folded so that in their final, deployed state they exhibit motion. Hundreds of action origami models exist, many of which use complicated kinematics to achieve motion in their deployed state. A better understanding of the mechanisms used to create motion in action origami could be a foundation for developing a new source of concepts for deployable, movable engineering solutions. This brief presents an approach for evaluating and classifying the mechanisms that enable action origami motion. Approximately 130 action origami models are investigated. Although disguised with artistic elements, it is found that most action origami models are based on a few fundamental mechanisms. A classification scheme is proposed, and an unexplored class of action origami is identified as an area for future origami art.
This paper presents the conceptualization and modeling of a compliant forceps design, which we have called Oriceps, as an example of origami-inspired design that has application in a variety of settings including robotic surgeries. Current robotic forceps often use traditional mechanisms with parts that are difficult to clean, wear quickly, and are challenging to fabricate due to their complexity and small size. The Oriceps design is based on the spherical kinematic configurations of several action origami models, and can be fabricated by cutting and folding flat material. This design concept has potential implementation as surgical forceps because it would require fewer parts, be easier to sterilize, and be potentially suitable for both macro and micro scales. The folded and planar characteristics of this design could be amenable to application of smart materials resulting in smaller scale, greater tool flexibility, integrated actuation, and an adaptability to a variety of tool functions. The suitability of shape-memory materials for use in Oriceps is discussed.
This work exploits the advantages of compliant mechanisms (devices that achieve their motion through the deflection of flexible members) to enable the creation of small instruments for minimally invasive surgery (MIS). Using flexures to achieve motion presents challenges, three of which are considered in this work. First, compliant mechanisms generally perform inadequately in compression. Second, for a ±90deg range of motion desired for each jaw, the bending stresses in the flexures are prohibitive considering materials used in current instruments. Third, for cables attached at fixed points on the mechanism, the mechanical advantage will vary considerably during actuation. Research results are presented that address these challenges using compliant mechanism principles as demonstrated in a two-degree-of-freedom (2DoF) L-Arm gripper.
A new, compact 2 degree-of-freedom mechanism 4.1 mm in diameter suitable for robotically controlled surgical operations is presented. Current commercially available robotically controlled instruments achieve high dexterity defined by three degrees of freedom and relatively confined swept volume at just under 1 cm in diameter. Current smaller diameter instruments result in high part count and large swept volumes (less dexterity). A meso-scale rolling contact gripping mechanism is proposed as an alternative. The manufacturing of the parts is made feasible by Metal Laser Sintering, which can produce parts that are difficult to replicate with traditional manufacturing methods. The resulting instrument has only 6 parts and a small swept volume. Instrument actuation and control by a surgical robotic system is demonstrated.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.