An effective way to improve polymer solar cell efficiency is to use a tandem structure, as a broader part of the spectrum of solar radiation is used and the thermalization loss of photon energy is minimized. In the past, the lack of high-performance low-bandgap polymers was the major limiting factor for achieving high-performance tandem solar cell. Here we report the development of a high-performance low bandgap polymer (bandgap <1.4 eV), poly[2,7-(5,5-bis-(3,7-dimethyloctyl)-5H-dithieno[3,2-b:2′,3′-d]pyran)-alt-4,7-(5,6-difluoro-2,1,3-benzothia diazole)] with a bandgap of 1.38 eV, high mobility, deep highest occupied molecular orbital. As a result, a single-junction device shows high external quantum efficiency of >60% and spectral response that extends to 900 nm, with a power conversion efficiency of 7.9%. The polymer enables a solution processed tandem solar cell with certified 10.6% power conversion efficiency under standard reporting conditions (25 °C, 1,000 Wm−2, IEC 60904-3 global), which is the first certified polymer solar cell efficiency over 10%.
Polymer tandem solar cells with 10.2% power conversion efficiency are demonstrated via stacking two PDTP-DFBT:PC₇₁ BM bulk heterojunctions, connected by MoO₃/PEDOT:PSS/ZnO as an interconnecting layer. The tandem solar cells increase the power conversion efficiency of the PDTP-DFBT:PC₇₁ BM system from 8.1% to 10.2%, successfully demonstrating polymer tandem solar cells with identical sub-cells of double-digit efficiency.
Silver nanowire (AgNW) networks are promising candidates to replace indium-tin-oxide (ITO) as transparent conductors. However, complicated treatments are often required to fuse crossed AgNWs to achieve low resistance and good substrate adhesion. In this work, we demonstrate a simple and effective solution method to achieve highly conductive AgNW composite films with excellent optical transparency and mechanical properties. These properties are achieved via sequentially applying TiO(2) sol-gel and PEDOT:PSS solution to treat the AgNW film. TiO(2) solution volume shrinkage and the capillary force induced by solvent evaporation result in tighter contact between crossed AgNWs and improved film conductivity. The PEDOT:PSS coating acts as a protecting layer to achieve strong adhesion. Organic photovoltaic devices based on the AgNW-TiO(2)-PEDOT:PSS transparent conductor have shown comparable performance to those based on commercial ITO substrates.
A simple method is demonstrated to improve the fi lm-forming properties and air stability of a conjugated polyelectrolyte (CPE) without complicated synthesis of new chemical structures. An anionic surfactant, sodium dodecybenzenesulfonate (SDS), is mixed with cationic CPEs. The electrostatic attraction between these two oppositely-charged materials provides the driving force to form a stable CPE-surfactant complex. Compared with a pure CPE, this electrostatic complex is not only compatible with highly hydrophobic bulk-heterojunction (BHJ) fi lms, e.g. poly(3-hexylthiophene):[6,6]-phenyl C 61 butyric acid methyl ester (P3HT:PCBM), but also works well with other low bandgap polymer-based BHJ fi lms. Using this complex as a cathode interface layer, a high power conversion effi ciency of 4% can be obtained in P3HT:PCBM solar cells together with improved stability in air. Moreover, ∼ 20% performance enhancement can also be achieved when the complex is used as an interlayer to replace calcium metal for low bandgap polymer-based BHJ systems.
The power conversion efficiency (PCE) of a DPP-based polymer solar cell is significantly improved by using DIO or DCB as processing additives. The discovery that DCB outperforms DIO with a significantly wider solvent mixture operation window suggests different optimization mechanisms. Although both solvent mixture systems involve double aggregation processes, including a similar solution-to-film aggregation, however, two distinct solution-stage aggregations are observed: relatively amorphous polymer aggregates form in the CF-DIO solution, while more crystalline polymer aggregates form in CF-DCB solution.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.