Visibly transparent photovoltaic devices can open photovoltaic applications in many areas, such as building-integrated photovoltaics or integrated photovoltaic chargers for portable electronics. We demonstrate high-performance, visibly transparent polymer solar cells fabricated via solution processing. The photoactive layer of these visibly transparent polymer solar cells harvests solar energy from the near-infrared region while being less sensitive to visible photons. The top transparent electrode employs a highly transparent silver nanowire-metal oxide composite conducting film, which is coated through mild solution processes. With this combination, we have achieved 4% power-conversion efficiency for solution-processed and visibly transparent polymer solar cells. The optimized devices have a maximum transparency of 66% at 550 nm.

We developed a dispersal method for multi-walled carbon nanotubes (MWCNTs) that allows quantitative assessment of dispersion on pro-fibrogenic responses in tissue culture cells as well as in mouse lung. Here we demonstrate that the dispersal of as-prepared (AP), purified (PD), and carboxylated (COOH) MWCNTs by bovine serum albumin (BSA) and dipalmitoylphosphatidylcholine (DPPC) influences TGF-β1, PDGF-AA and IL-1β production in vitro and in vivo. These biomarkers were chosen based on their synergy in promoting fibrogenesis and cellular communication in the epithelial-mesenchymal cell trophic unit in the lung. The effect of dispersal was most noticeable in AP- and PD-MWCNTs, which are more hydrophobic and unstable in aqueous buffers than hydrophilic COOH-MWCNTs. Well-dispersed AP- and PD-MWCNTs were readily taken up by BEAS-2B, THP-1 cells and alveolar macrophages (AM), and induced more prominent TGF-β1 and IL-1β production in vitro as well as TGF-β1, IL-1β and PDGF-AA production in vivo than non-dispersed tubes. Moreover, there was good agreement between the pro-fibrogenic responses in vitro and in vivo as well as the ability of dispersed tubes to generate granulomatous inflammation and fibrosis in airways. Tube dispersal also elicited more robust IL-1β production in THP-1 cells. While COOH-MWCNTs were poorly taken up in BEAS-2B and induced little TGF-β1 production, they were bio-processed by AM and induced less prominent collagen deposition at sites of non-granulomatous inflammation in the alveolar region. Taken together, these results indicate that the dispersal state of MWCNTs affects pro-fibrogenic cellular responses that correlate with the extent of pulmonary fibrosis and are of potential use to predict pulmonary toxicity.

Silver nanowire (AgNW) networks are promising candidates to replace indium-tin-oxide (ITO) as transparent conductors. However, complicated treatments are often required to fuse crossed AgNWs to achieve low resistance and good substrate adhesion. In this work, we demonstrate a simple and effective solution method to achieve highly conductive AgNW composite films with excellent optical transparency and mechanical properties. These properties are achieved via sequentially applying TiO(2) sol-gel and PEDOT:PSS solution to treat the AgNW film. TiO(2) solution volume shrinkage and the capillary force induced by solvent evaporation result in tighter contact between crossed AgNWs and improved film conductivity. The PEDOT:PSS coating acts as a protecting layer to achieve strong adhesion. Organic photovoltaic devices based on the AgNW-TiO(2)-PEDOT:PSS transparent conductor have shown comparable performance to those based on commercial ITO substrates.

Solution-processed metallic nanowire thin film is a promising candidate to replace traditional indium tin oxide as the next-generation transparent and flexible electrode. To date however, the performance of these electrodes is limited by the high contact resistance between contacting nanowires; so improving the point contacts between these nanowires remains a major challenge. Existing methods for reducing the contact resistance require either a high processing power, long treatment time, or the addition of chemical reagents, which could lead to increased manufacturing cost and damage the underlying substrate or device. Here, a nanoscale point reaction process is introduced as a fast and low-power-consumption way to improve the electrical contact properties between metallic nanowires. This is achieved via current-assisted localized joule heating accompanied by electromigration. Localized joule heating effectively targets the high-resistance contact points between nanowires, leading to the automatic removal of surface ligands, welding of contacting nanowires, and the reshaping of the contact pathway between the nanowires to form a more desirable geometry of low resistance for interwire conduction. This result shows the interplay between thermal and electrical interactions at the highly reactive nanocontacts and highlights the control of the nanoscale reaction as a simple and effective way of turning individual metallic nanowires into a highly conductive interconnected nanowire network. The temperature of the adjacent device layers can be kept close to room temperature during the process, making this method especially suitable for use in devices containing thermally sensitive materials such as polymer solar cells.

No abstract

We apply in situ surface-enhanced Raman spectroscopy (SERS) to probe the reversible photoswitching of azobenzene-functionalized molecules inserted in self-assembled monolayers that serve as controlled nanoscale environments. Nanohole arrays are fabricated in Au thin films to enable SERS measurements associated with excitation of surface plasmons. A series of SERS spectra are recorded for azobenzene upon cycling exposure to UV (365 nm) and blue (450 nm) light. Experimental spectra match theoretical calculations. On the basis of both the simulations and the experimental data analysis, SERS provides quantitative information on the reversible photoswitching of azobenzene in controlled nanoscale environments.

A novel solution-based approach is presented to process earth-abundant Cu(2)ZnSn(S,Se)(4) absorbers using fully dissolved CZTS precursors in which each of the elemental constituents intermix on a molecular scale. This method enables the low-temperature processing of chemically clean kesterite films with excellent homogeneity. The high performance of resulting optoelectronic devices represents a chance to extend the impact of CZTS into the next chapter of thin-film solar cells.

No abstract