Malang Indonesia is an area prone to landslides, resulting in the need to model soil reinforcement to determine the vegetation’s slope stability using the roots of five species. One of the methods to improve the stability of slopes prone to landslides is adequate vegetation preservation. Soil strengthening with vegetation roots is environmentally friendly and an inexpensive alternative to reduce the vulnerability of slopes along mountainous slopes and the risk of shallow erosions. Therefore, this study aims to evaluate the vegetation arrangement on the slopes in Malang Regency, Indonesia, with a view of geotechnical engineering on the role of its root characteristics. Slope stability was analyzed by modeling the distribution of vegetation roots as an equivalent cohesion approach, where the factor of safety (FoS) is calculated using the PLAXIS-2D version 86 software. Soil and root parameters were obtained through direct shear testing and examining five plant species’ tensile strength. The results showed that the highest stability is achieved when the position of the vegetation on the slope’s surface is compared to the top. The factor of safety (FoS) increased from 23% to 30% and from 28% to 31% for slopes with uniform and combined species. Of the five plant species, P. merkusii demonstrated some advantages in maintaining stability because it has better root mechanical properties, among others. However, the combined species, such as C. arabica, had better performance because they possess vertical and lateral root systems, which act as an anchor in penetrating and griping the soil. This means combining vegetation species is a preferable preventive measure to increase slope stability. The analysis results also demonstrated the significance of vegetation on slope stability. The results show that the FoS decreases when the slope angle increases and reaches its maximum when the species are combined. The mechanical effect of the plant root matrix system can increase the shear strength of the soil, thereby raising the slope stability. The density of roots in the soil mass and the tensile strength contribute to the soil’s ability to withstand shear stresses.
Dalam pelaksanaan konstruksi, pemilihan, proses, serta hasil dari pemadatan sangat diperhatikan. Ketiga hal tersebut sangat mempengaruhi energi serta biaya yang digunakan. Karakteristik kepadatan, kekuatan, kompresibilitas, dan permeabilitas sangat dipengaruhi oleh kandungan butir kasar dan butir halus yang ada didalamnya. Adanya kandungan butir halus dalam material akan menimbulkan keberadaan mineral yang mengakibatkan peningkatan terhadap daya serap air. Sementara butir kasar didalam material akan cenderung memiliki tingkat kepadatan yang lebih tinggi. Penelitian ini mempelajari karakteristik pemadatan dari pengaruh kandungan butir halus dari campuran material residual. Material yang digunakan berasal dari Jawa Barat, yaitu tanah merah dari daerah Lagadar dan pasir dari daerah Padalarang. Penelitian ini menggunakan tujuh variasi presentase butir halus yang berbeda yaitu 10%, 20%, 30%, 40%, 50%, 70%, dan 100%. Pengujian pemadatan laboratorium menggunakan Standard Proctor Compaction Test (ASTM D 698-91). Berdasasarkan hasil pengujian kompaksi diperoleh kepadatan maksimum (MDD) dari kandungan material butir halus 10% hingga 100% secara berturut-turut adalah 1.53, 1.49, 1.47, 1.42, 1.39, 1.38, dan 1.36 gr/cm3, sedangkan kadar air optimum yang membentuknya adalah 19%, 20%, 22.5%, 26%, 31%, 32%, dan 34%. Dari hasil tersebut dapat diketahui bahwa peningkatan presentase butir halus akan meningkatkan kadar air optimum (OMC) dan menurunkan nilai kepadatan maksimum (MDD). Presentase butir halus 10%, 20%, dan 30% menghasilkan nilai MDD yang cenderung sama, yaitu dengan perbedaan 1.3%. Berdasarkan hasil tersebut maka material dengan kandungan butir halus 10% hingga 30% direkomendasikan sebagai material yang direkomdasikan untuk pekerjaan timbunan.
Salah satu persyaratan penting yang diperlukan dalam suatu struktur pondasi bangunanadalah karakteristik media tanah yang terdapat di area tersebut. Secara garis besar, tanah hanyaterbagi dua menjadi tanah butir kasar maupun butir halus. Namun pada kenyataannya, kondisidilapangan memperlihatnya kondisi yang berbeda. Pada kedalaman-kedalaman dibawahpermukaan tanah tidak lagi dijumpai material murni, baik pasir, lempung, maupun lanau. Yangada merupakan material campuran baik lempung pasiran, pasir lempungan, pasir lanauan, maupunlanau pasiran, dan sebagainya. Hal ini mempengaruhi perilaku material, tidak lagi berperilakusebagai material asli yang membentuknya. Penelitian ini bertujuan untuk mempelajari perilakutanah residual tropis baik agregat kasar maupun halus yang dipadatkan. Untuk agregat kasarpengujian yang dilakukan meliputi specific gravity (Gs) dan analisa ukuran butir. Sedangkan untukagregat halus dilakukan pengujian kadar air, specific gravity (Gs), analisa ukuran butir,hidrometer, atterberg limits. Karena merupakan material terganggu, maka kedua material tidakdilakukan pengujian index properties. Berdasarkan pengujian awal yang dilakukan, dapatdisimpulkan sementara bahwa perubahan perilaku material butir kasar menjadi perilaku materialbutir halus terjadi pada komposisi material campuran 25% tanah merah Lagadar dan 75% pasirPadalarang.
Untuk mengukur daya dukung dari fondasi diperlukan pengujian pembebanan pada tiang, guna menentukan hal tersebut maka perlu dilakukan pengujian pada tiang fondasi. Metode pengujian yang digunakan pada penelitian ini adalah metode pengujian pembebanan dua arah, metode ini merupakan metode pengujian pembebanan dengan memberikan tekanan dua arah pada tiang fondasi. Pengujian dilakukan pada tiang fondasi bor yang memiliki diameter 1800 mm dengan panjang efektif 70 m dengan kondisi tanah disekitar merupakan tanah lunak. Hasil dari pengujian metode pembebenan dua arah akan dianalisa dengan metode perhitungan equivalent load dan interpretasi data sehingga menghasilkan daya dukung ultimit sebesar 16091,9 kN dengan penurunan 18,53 mm. Hasil perhitungan tersebut akan dibandingkan dengan hasil perhitungan analisis statik yang menggunakan metode perhitungan Reese & Wright dan Vesic, dari hasil perhitungan metode statik menghasilkan nilai besaran daya dukung sebesar 16960,5 kN dan nilai besaran penurunan sebesar 24.56 mm. Hasil perbandingan dari kedua metode tersebut menunjukan bahwa nilai besaran daya dukung dan penurunan pembebanan dua arah lebih kecil 5 % dan 25 % dibandingkan nilai besaran daya dukung dan penurunan dari hasil perhitungan analisis statik.
<span>Penurunan merupakan suatu hal yang tidak dapat dihindari bagi setiap proses konstruksi. Dimana, tanah akan <span>mengalami penambahan beban yang bekerja diatasnya. Penurunan diperbolehkan untuk terjadi dengan<br /><span>memperhatikan kondisi yang disyaratkan untuk setiap ketentuan. Idealnya, penurunan tanah terjadi tidak dalam <span>waktu yang lama, karena akan sangat mempengaruhi waktu pembangunan. Pulau Jawa memiliki jenis tanah yang<br /><span>residual, hal ini terbentuk akibat dari pelapukan batuan yang keluar dari semburan gunung berapi dan tidak <span>berpindah tempat. Sifatdan karakteristik tanah residual umumnya memiliki kandungan butir halus yang sangat<br /><span>banyak, sehingga mampu untuk menyerap air lebih tinggi dan dapat dikategorikan sebagai tanah lunak jika kadar <span>air didalamnya cukup tinggi. masalah yang sering dialami oleh tanah lunak adalah besarnya penurunan yang <span>terjadi jika diberikan beban diatasnya. Pengujian terhadap material campuran dengan menggunkan tanah residual <span>dan pasir yang berasal dari Lagadar, Jawa Barat dilakukan untuk mengetahui koefisien kompresibilitas (Cc) yang <span>sangat menentukan penurunan tanah. Material uji dibuat dengan komposisi 10%, 20%, 30%, 40%, 50%, 70%, dan <span>100% kandungan tanah residual yang dipadatkan pada berat volume kering 1,36 gr/cm <span>3<span>. Dari hasil pengujian <span>tersebut diketahui bahwa nilai Cc meningkat seiring dengan bertambahnya kandungan tanah residual didalam <span>material campuran. Serta penurunan tanah cenderung stabili hingga kandungan tanah residual mencapai 40%</span></span></span></span></span></span></span></span></span></span></span></span></span><br /><br class="Apple-interchange-newline" /></span></span></span>
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.