This letter reports a two-step growth process for improving microstructural quality of semipolar (112̱2) GaN on nitridized m-plane sapphire. The two-step growth of (112̱2) GaN, islanding growth under high pressure followed by islands coalescence under low pressure, went through a roughening-recovery process, which was found very effective in reducing the density of stacking faults and dislocations in (112̱2) GaN. The x-ray rocking curves of both on-axis and off-axis planes were narrowed down by more than 50%. The improvement of GaN quality was confirmed by a boost in blue and green optical output of semipolar (112̱2) InGaN/GaN quantum wells.

In this paper we provide explanations to the complex growth phenomena of GaN heteroepitaxy on nonpolar orientations using the concept of kinetic Wulff plots (or v-plots). Quantitative mapping of kinetic Wulff plots in polar, semipolar, and nonpolar angles are achieved using a differential measurement technique from selective area growth. An accurate knowledge of the topography of kinetic Wulff plots serves as an important stepping stone toward model-based control of nonpolar GaN growth. Examples are illustrated to correlate growth dynamics based on the kinetic Wulff plots with commonly observed features, including anisotropic nucleation islands, highly striated surfaces, and pentagonal or triangular pits.

This work represents a comprehensive attempt to correlate the heteroepitaxial dynamics in experiments with fundamental principles in crystal growth using the kinetic Wulff plot (or v-plot). Selective area growth is employed to monitor the advances of convex and concave facets toward the construction of a comprehensive v-plot as a guidepost for GaN heteroepitaxy. A procedure is developed to apply the experimentally determined kinetic Wulff plots to the interpretation and the design of evolution dynamics in nucleation and island coalescence. This procedure offers a cohesive and rational model for GaN heteroepitaxy on polar, nonpolar, and semipolar orientations and is broadly extensible to other heteroepitaxial material systems. We demonstrate furthermore that the control of morphological evolution, based on invoking a detailed knowledge of the v-plots, holds a key to the reduction of microstructural defects through effective bending of dislocations and geometrical blocking of stacking faults, paving a way to device-quality heteroepitaxial nonpolar and semipolar GaN materials.

For nonpolar and semipolar orientations of GaN heteroepitaxially grown on sapphire substrates, the development of growth procedures to improve surface morphology and microstructure has been driven in a largely empirical way. This work attempts to comprehensively link the intrinsic properties of GaN faceted growth, across orientations, in order to understand, design and control growth methods for nonpolar (1 1 2 0) GaN and semipolar (1 1 2 2) GaN on foreign substrates. This is done by constructing a comprehensive series of kinetic Wulff plots (or v-plots) by monitoring the advances of convex and concave facets in selective area growth. A methodology is developed to apply the experimentally determined v-plots to the interpretation and design of evolution dynamics in nucleation and island coalescence. This methodology offers a cohesive and rational model for GaN heteroepitaxy along polar, nonpolar and semipolar orientations, and is broadly extensible to the heteroepitaxy of other materials. We demonstrate furthermore that the control of morphological evolution, based on invoking a detailed knowledge of the v-plots, holds a key to the reduction of microstructural defects through effective bending of dislocations and blocking of stacking faults. The status and outlook of semipolar and nonpolar GaN growth on sapphire substrates will be presented.

For more than 50 years, research into III-V compound semiconductors has focused almost exclusively on materials grown on (001)-oriented substrates. In part, this is due to the relative ease with which III-Vs can be grown on (001) surfaces. However, in recent years, a number of key technologies have emerged that could be realized, or vastly improved, by the ability to also grow high-quality III-Vs on (111)-or (110)-oriented substrates These applications include: nextgeneration field-effect transistors, novel quantum dots, entangled photon emitters, spintronics, topological insulators, and transition metal dichalcogenides. The first purpose of this paper is to present a comprehensive review of the literature concerning growth by molecular beam epitaxy (MBE) of III-Vs on (111) and (110) substrates. The second is to describe our recent experimental findings on the growth, morphology, electrical, and optical properties of layers grown on non-(001) InP wafers. Taking InP(111)A, InP(111)B, and InP(110) substrates in turn, the authors systematically discuss growth of both In 0.52 Al 0.48 As and In 0.53 Ga 0.47 As on these surfaces. For each material system, the authors identify the main challenges for growth, and the key growth parameter-property relationships, trends, and interdependencies. The authors conclude with a section summarizing the MBE conditions needed to optimize the structural, optical and electrical properties of GaAs, InAlAs and InGaAs grown with (111) and (110) orientations. In most cases, the MBE growth parameters the authors recommend will enable the reader to grow high-quality material on these increasingly important non-(001) surfaces, paving the way for exciting technological advances.