We have developed methods to exfoliate MoS 2 in large quantities in surfactant-water solutions. This method can be extended to a range of other layered compounds. The layered material tends to be exfoliated as relatively defect free flakes with lateral sizes of 100s of nm. 2With high surface area and novel properties, two-dimensional (2D) materials are potentially useful for a range of applications. In addition to graphene, many 2D compounds exist with BN, MoS 2 and Bi 2 Te 3 generating renewed interest. Such materials are found stacked in layered crystals and can be metals, semiconductors or insulators.[ tend to bond via van der Waals interactions, stacking to form 3D crystals. These materials span the whole gamut of electronic structures from insulator to metal [1] and display interesting properties [6] such as superconductivity, [3] thermoelectricity [2] and topological insulator effects.[4]While micro-mechanically exfoliated [7] single flakes of materials such as MoS 2 are ideal for electronic devices, [8] large scale liquid-phase exfoliation methods will lead to a range of thin film applications such as nano-scale hybrids for use in thermoelectrics, [9] supercapacitors [10] or Li-ion batteries [11] . One advantage of such applications is that, as the electronic properties of TMDs vary relatively slowly with layer number, [12,13] full exfoliation to monolayers is not necessary; dispersed few-layer flakes are sufficient.While a number of layered compounds can be exfoliated by ion intercalation, [14][15][16][17] this method is time consuming, extremely sensitive to environmental conditions and results in structural deformations in some TMDs.[18] Furthermore, removal of the ions results in re-aggregation of the layers.[19] More promisingly, it has recently been shown that both TMDs [20] and BN can be exfoliated in organic solvents. [21][22][23][24] However, for large-scale applications, exfoliation in an aqueous environment would be hugely advantageous. While BN can be dispersed in water due to sonication-assisted hydrolysis, this method cannot be extended to other layered compounds.[25] The discovery of a facile, scalable method to exfoliate a range of layered materials in water would assist the production and 3 characterisation of a range of new materials and greatly facilitate the potential transfer of such technology to industry. In this work we show that a number of layered crystals can be exfoliated in water, resulting in thin flakes stabilised by a surfactant coating. This method is robust, can be carried out in ambient conditions, is scalable and allows the preparation of films, hybrids and composites.One possible reason why ion intercalation has been prevalent for TMDs rather than other liquid based dispersion methods is the relatively high exfoliation (surface) energy of TMDs. Computational studies have estimated this as greater than 250 mJ/m 2 for both MoS 2 and WS 2 ; [26,27] many times greater than that of graphene [28] or BN [29] . We suggest that sonication can be used to exfoliate TMDs in water,...

To improve prognosis in recurrent glioblastoma we developed a treatment protocol based on a combination of drugs not traditionally thought of as cytotoxic chemotherapy agents but that have a robust history of being well-tolerated and are already marketed and used for other non-cancer indications. Focus was on adding drugs which met these criteria: a) were pharmacologically well characterized, b) had low likelihood of adding to patient side effect burden, c) had evidence for interfering with a recognized, well-characterized growth promoting element of glioblastoma, and d) were coordinated, as an ensemble had reasonable likelihood of concerted activity against key biological features of glioblastoma growth. We found nine drugs meeting these criteria and propose adding them to continuous low dose temozolomide, a currently accepted treatment for relapsed glioblastoma, in patients with recurrent disease after primary treatment with the Stupp Protocol. The nine adjuvant drug regimen, Coordinated Undermining of Survival Paths, CUSP9, then are aprepitant, artesunate, auranofin, captopril, copper gluconate, disulfiram, ketoconazole, nelfinavir, sertraline, to be added to continuous low dose temozolomide. We discuss each drug in turn and the specific rationale for use- how each drug is expected to retard glioblastoma growth and undermine glioblastoma's compensatory mechanisms engaged during temozolomide treatment. The risks of pharmacological interactions and why we believe this drug mix will increase both quality of life and overall survival are reviewed.

BackgroundGlioblastoma multiforme (GBM), a common primary malignant brain tumor, rarely disseminates beyond the central nervous system and has a very bad prognosis. The current study aimed at the analysis of immunological control in individual patients with GBM.MethodsImmune phenotypes and plasma biomarkers of GBM patients were determined at the time of diagnosis using flow cytometry and ELISA, respectively.ResultsUsing descriptive statistics, we found that immune anomalies were distinct in individual patients. Defined marker profiles proved highly relevant for survival. A remarkable relation between activated NK cells and improved survival in GBM patients was in contrast to increased CD39 and IL-10 in patients with a detrimental course and very short survival. Recursive partitioning analysis (RPA) and Cox proportional hazards models substantiated the relevance of absolute numbers of CD8 cells and low numbers of CD39 cells for better survival.ConclusionsDefined alterations of the immune system may guide the course of disease in patients with GBM and may be prognostically valuable for longitudinal studies or can be applied for immune intervention.Electronic supplementary materialThe online version of this article (doi:10.1186/s13045-016-0272-3) contains supplementary material, which is available to authorized users.

Correlating the electronic structure and magnetic response with the morphology and crystal structure of the same single ferromagnetic nanoparticle has been up to now an unresolved challenge. Here, we present measurements of the element-specific electronic structure and magnetic response as a function of magnetic field amplitude and orientation for chemically synthesized single Fe nanocubes with 18 nm edge length. Magnetic states and interactions of monomers, dimers, and trimers are analyzed by X-ray photoemission electron microscopy for different particle arrangements. The element-specific electronic structure can be probed and correlated with the changes of magnetic properties. This approach opens new possibilities for a deeper understanding of the collective response of magnetic nanohybrids in multifunctional materials and in nanomagnetic colloidal suspensions used in biomedical and engineering technologies.

No abstract

This commmunication presents a study of atomic layer deposition of Al 2 O 3 on transition metal dichalcogenide (TMD) two-dimensional films which is crucial for use of these promising materials for electronic applications. Deposition of Al 2 O 3 on pristine chemical vapour deposited MoS 2 and WS 2 crystals is demonstrated. This deposition is dependent on the number of TMD layers as there is no deposition on pristine monolayers. In addition, we show that it is possible to reliably seed the deposition, even on the monolayer, using non-covalent functionalisation with perylene derivatives as anchor unit.The integration of transition metal dichalcogenides (TMDs) into existing semiconductor technology is of major interest. 1,2 The synthesis of these materials has been vastly improved over the last few years and many possible devices have been proposed and realised. [3][4][5][6] But to finally achieve their large-scale integration and production, it is necessary to make TMDs fully CMOS processable. One prerequisite for this is the deposition of subsequent layers on top of the TMD for gating and passivation as the performance and stability of TMD based devices hugely depends on their dielectric environment. This task is nontrivial as any impact on the surface of the TMD will result in the destruction of its electronic properties. It has been shown that encapsulation of the 2D material by mechanical deposition of hexagonal boron nitride results in the best preservation of its electronic properties but this approach is not scalable. 7 Other frequently used deposition methods for oxides such as sputtering or plasma-enhanced chemical vapour deposition (PECVD) are not suitable as their application will cause damage to the monolayer.Atomic layer deposition (ALD) is a mild and highly precise technique for thin film deposition, mainly used for depositing gate oxides in integrated circuits. 8 The most common ALD process is the deposition of Al 2 O 3 from alternating exposures of trimethylaluminium (TMA, Al(CH 3 ) 3 ) and water according to the reaction: 9 2Al(CH 3 ) 3 + 3H 2 O -Al 2 O 3 + 6CH 4 DH = À376 kcal This reaction is thermodynamically highly favourable and works over a large range of temperatures with temperatures between 33 1C and 500 1C demonstrated, making it very reliable and common in the silicon and III-V semiconductor industries. 10,11 However, in the initial step the TMA needs a surface hydroxyl group with which it reacts and the lack of such groups on the TMD's basal plane makes starting the deposition non-trivial; a challenge also encountered with graphene. [12][13][14][15] Using ozone instead of water may prove harmful to the oxidation-sensitive TMD layers, though there have been some recent successes. 16 An initial, purely adsorptionbased deposition can be achieved but tends to be dependent on temperature and other factors like underlying electronic structure and is therefore often not entirely reproducible; it has been shown several times that studies may not reproduce results under apparently similar condit...

OBJECTIVEPlacement of a ventricular drain is one of the most common neurosurgical procedures. However, a higher rate of successful placements with this freehand procedure is desirable. The authors’ objective was to develop a compact navigational augmented reality (AR)–based tool that does not require rigid patient head fixation, to support the surgeon during the operation.METHODSSegmentation and tracking algorithms were developed. A commercially available Microsoft HoloLens AR headset in conjunction with Vuforia marker-based tracking was used to provide guidance for ventriculostomy in a custom-made 3D-printed head model. Eleven surgeons conducted a series of tests to place a total of 110 external ventricular drains under holographic guidance. The HoloLens was the sole active component; no rigid head fixation was necessary. CT was used to obtain puncture results and quantify success rates as well as precision of the suggested setup.RESULTSIn the proposed setup, the system worked reliably and performed well. The reported application showed an overall ventriculostomy success rate of 68.2%. The offset from the reference trajectory as displayed in the hologram was 5.2 ± 2.6 mm (mean ± standard deviation). A subgroup conducted a second series of punctures in which results and precision improved significantly. For most participants it was their first encounter with AR headset technology and the overall feedback was positive.CONCLUSIONSTo the authors’ knowledge, this is the first report on marker-based, AR-guided ventriculostomy. The results from this first application are encouraging. The authors would expect good acceptance of this compact navigation device in a supposed clinical implementation and assume a steep learning curve in the application of this technique. To achieve this translation, further development of the marker system and implementation of the new hardware generation are planned. Further testing to address visuospatial issues is needed prior to application in humans.

Background Dysregulation of the metabolome is a hallmark of primary brain malignancies. In this work we examined whether metabolic reprogramming through a multi-targeting approach causes enhanced anti-cancer activity in glioblastoma. Methods Preclinical testing of a combined treatment with ONC201/TIC10 and 2-Deoxyglucose was performed in established and primary-cultured glioblastoma cells. Extracellular flux analysis was used to determine real-time effects on OXPHOS and glycolysis. Respiratory chain complexes were analysed by western blotting. Biological effects on tumour formation were tested on the chorioallantoic membrane (CAM). Results ONC201/TIC10 impairs mitochondrial respiration accompanied by an increase of glycolysis. When combined with 2-Deoxyglucose, ONC201/TIC10 induces a state of energy depletion as outlined by a significant decrease in ATP levels and a hypo-phosphorylative state. As a result, synergistic anti-proliferative and anti-migratory effects were observed among a broad panel of different glioblastoma cells. In addition, this combinatorial approach significantly impaired tumour formation on the CAM. Conclusion Treatment with ONC201/TIC10 and 2-Deoxyglucose results in a dual metabolic reprogramming of glioblastoma cells resulting in a synergistic anti-neoplastic activity. Given, that both agents penetrate the blood–brain barrier and have been used in clinical trials with a good safety profile warrants further clinical evaluation of this therapeutic strategy.