Distinct from pure graphene, N-doped graphene (GN) has been found to possess high rate capability and capacity for lithium storage. However, there has still been a lack of direct experimental evidence and fundamental understanding of the storage mechanisms at the atomic scale, which may shed a new light on the reasons of the ultrafast lithium storage property and high capacity for GN. Here we report on the atomistic insights of the GN energy storage as revealed by in situ transmission electron microscopy (TEM). The lithiation process on edges and basal planes is directly visualized, the pyrrolic N "hole" defect and the perturbed solid-electrolyte-interface configurations are observed, and charge transfer states for three N-existing forms are also investigated. In situ high-resolution TEM experiments together with theoretical calculations provide a solid evidence that enlarged edge {0002} spacings and surface hole defects result in improved surface capacitive effects and thus high rate capability and the high capacity are owing to short-distance orderings at the edges during discharging and numerous surface defects; the phenomena cannot be understood previously by standard electron or X-ray diffraction analyses.

As the most promising anode material for sodium-ion batteries (SIBs), elemental phosphorus (P) has recently gained a lot of interest due to its extraordinary theoretical capacity of 2596 mAh/g. The main drawback of a P anode is its low conductivity and rapid structural degradation caused by the enormous volume expansion (>490%) during cycling. Here, we redesigned the anode structure by using an innovative methodology to fabricate flexible paper made of nitrogen-doped graphene and amorphous phosphorus that effectively tackles this problem. The restructured anode exhibits an ultrastable cyclic performance and excellent rate capability (809 mAh/g at 1500 mA/g). The excellent structural integrity of the novel anode was further visualized during cycling by using in situ experiments inside a high-resolution transmission electron microscope (HRTEM), and the associated sodiation/desodiation mechanism was also thoroughly investigated. Finally, density functional theory (DFT) calculations confirmed that the N-doped graphene not only contributes to an increase in capacity for sodium storage but also is beneficial in regards to improved rate performance of the anode.

A wire‐shaped flexible dye‐sensitized solar cell (WSF‐DSSC) without any transparent conducting oxide materials is fabricated. The cell has a helical twisting structure formed by two fiber‐like electrodes (100 μm in diameter). Due to the twisting structure, many opaque conducting materials such as metal wire can be applied. It is found that the incident‐light‐angle dependence of the cell's IV output is extremely low.

Electrospun ZnO-SnO2 heterojunction nanofibers are demonstrated to be promising candidates for easily assembled fully transparent high-performance photodetectors.

Engineering of the optical, electronic, and magnetic properties of hexagonal boron nitride (h-BN) nanomaterials via oxygen doping and functionalization has been envisaged in theory. However, it is still unclear as to what extent these properties can be altered using such methodology because of the lack of significant experimental progress and systematic theoretical investigations. Therefore, here, comprehensive theoretical predictions verified by solid experimental confirmations are provided, which unambiguously answer this long-standing question. Narrowing of the optical bandgap in h-BN nanosheets (from ≈5.5 eV down to 2.1 eV) and the appearance of paramagnetism and photoluminescence (of both Stokes and anti-Stokes types) in them after oxygen doping and functionalization are discussed. These results are highly valuable for further advances in semiconducting nanoscale electronics, optoelectronics, and spintronics.

No abstract

The application of nanofilm networks made of branched ZnS-ZnO nanostructures as a flexible UV photodetector is demonstrated. The fabricated devices show excellent operational characteristics: tunable spectral selectivity, widerange photoresponse, fast response speed, and excellent environmental stability.

Construction of cellular architectures has been expected to enhance materials' mechanical tolerance and to stimulate and broaden their efficient utilizations in many potential fields. However, hitherto, there have been rather scarce developments in boron nitride (BN)-type cellular architectures because of well-known difficulties in the syntheses of BN-based structures. Herein, cellular-network multifunctional foams made of interconnective nanotubular hexagonal BN (h-BN) architectures are developed using carbothermal reduction-assisted in situ chemical vapor deposition conversion from N-doped tubular graphitic cellular foams. These ultralight, chemically inert, thermally stable, and robust-integrity (supporting about 25,000 times of their own weight) three-dimensional-BN foams exhibit a 98.5% porosity, remarkable shape recovery (even after cycling compressions with 90% deformations), excellent resistance to water intrusion, thermal diffusion stability, and high strength and stiffness. They remarkably reduce the coefficient of thermal expansion and dielectric constant of polymeric poly(methyl methacrylate) composites, greatly contribute to their thermal conductivity improvement, and effectively limit polymeric composite softening at elevated temperatures. The foams also demonstrate high-capacity adsorption-separation and removal ability for a wide range of oils and organic chemicals in oil/water systems and reliable recovery under their cycling usage as organic adsorbers. These created multifunctional foams should be valuable in many high-end practical applications.